Desktop PC HP Pavilion p7-1222: DVI port

Similar Questions

• Desktop HP Pavilion 500-314: DVI Port defective?

  I have two monitors that I use for my photography business and I just opned my new HP pluged while with the exception of port DVI does not except my DVI connector. When I looked closer, I could see that the port has all the holes of pin except for the 4 pins on the end holes.

  Maybe I should use a better video card?

  Ideas? Thank you

  Hello:

  You need a DVI - D cable.

  You have a DVI-I have the cable.

  You have DVI - I is a combination digital/analog video cable.

  The port on your PC is pure digital.

  Take a look at the picture blown up this cable on the link below and get one like this.

  http://www.Newegg.com/product/product.aspx?item=N82E16812270191

• Turn on two HP Pavilion 500-319na DVI ports

  I just bought a HP Pavilion 500-319na which has been described as having 1 x HDMI, 2 x DVI video interfaces.

  The GeForce GT 705 nvidia graphics card has 1 x HDMI, 1 x DVI taken

  The motherboard has also 1 x taken DVI which was capped with a small piece of plastic with "do not remove" on the subject.

  After advice from PC World, I removed the plastic and tried the DVI socket mother who did not work.

  Is there a way of making the motherboard DVI to work in parallel with sockets of graphics cards.

  Finally, I would like to run two monitors from the DVI Sockets at the same time and have the HDMI enabled.

  This is my first Post ever anywhere so apologies if there is not enough information.

  See you soon

  RSPII

  Please provide the full brand and model, for both monitors information, you try to connect to your computer.

  Based on the specifications of your desktop HP Pavilion 500-319na, this model has a VGA port (analog only) integrated and an integrated port DVI - D (digital only) as shown below (please NOTE: embedded video is not available if a graphics card is installed);

  

  #4-VGA (analog only) # 5 - DVI - D (digital only)

  Please replace the plastic cover that you previously deleted. There is no way to activate the video ports built-in, although a discrete video card installed.

  NVIDIA GeForce GT 705
  DVI (dual-link) resolution: 2560 x 1600 x 32bpp at 60 Hz
  HDMI resolution: 1920 x 1080
  VGA (via dongle) analog resolution: 2048 x 1536 x 32bpp at 60 Hz
  Support of up to two displays at the same time.

  There are several ways to connect monitors to your computer, but you can use two ports on the NVIDIA GeForce GT 705. The discrete card supports DVI - D (and VGA via a dongle) and HDMI. HDMI signal is the same as DVI - D in this case.

  BETTER (recommended)

  Computer-> DVI - D cable-> monitor #1

  Computer-> HDMI to DVI - D cable-> Monitor #2

  GOOD

  Computer-> HDMI to DVI - D cable-> monitor #1

  Computer-> DVI-D/VGA dongle-> VGA cable-> Monitor #2

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Pavilion 500-277C Desktop P: DVI Port does not

  Second Montor doesn't work-

  I bought my HP Pavilion in November 2014 with two 27xi of HP monitors.  One is plugged into my VGA, the other into my port DVI port.  Well worked, until today.  MY DVI monitor is black.  I swapped the VGA DVI on the back of the monitors.  The issue moved to the other monitor (DVI cable), I checked the Device Manager and 1 single monitor is showon.  I did the updates of the pilot, no help.  When the computer starts, the DVI monitor is a different color and shows no signal, so I suspect the computer.  Thanks for any help.

  Hello

  If DVI does not work then try a known good DVI - D cable.

  As test, just try to use one monitor via DVI.

  Thanks for posting on the forum.

• Desktop HP Pavilion p6580t CTO: How can I configure my desktop PC HP Pavilion p6580t CTO for duel monitors?

  I am trying to understand what graphics card I put in my computer HP so I can run 2 two monitors and I have to cut the design of the motherboard that is installed on the computer. I have a HP w2207h (22 ") w/VGA port monitor that I use. and a ViewSonic VP2130B (21 ") monitor that has 1 VGA DVI port and 1-should I wear as the second monitor. The HP monitor is the oblong shape type and the ViewSonic is more a monitor of type square. I don't think it would be a problem, isn't it? In addition, my power is 300W. I don't want to spend a lot on the graphics card that this computer is about 6 years old; just enough to get a Setup dual monitor works.

  Below you will find the info from my computer.
  HP Pavilion p6580t CTO desktop PC
  Model # WS326AV

  Operating system - Windows 7 Ultimate 64 bit SP1 (office)

  CPU - Intel Core i5 650 @ 3.20 GHz Clarkdale 32nm technology
  Carrots 2
  Son 4
  Name Intel Core i5 650
  Code-named Clarkdale
  Package Socket LGA 1156
  The 32nm technology
  Specification Intel Core i5 CPU 650 @ 3.20 GHz
  RAM - 8.00 GB memory DDR3 twin @ 665 MHz (9-9-9-24)

  Motherboard - MSI 2A9C (CPU 1)
  Manufacturer MSI
  Model 2A9C (CPU 1)
  Version xxx0204GRxxxxxxxx0
  Intel chipset provider
  Model of chipset Host Bridge Havendale/Clarkdale
  Chipset revision 12
  Southbridge Intel supplier
  Southbridge model H57
  Southbridge review 06

  Graphics - HP w2207 (1680x1050@60Hz) 512 MB ATI Radeon HD 5450 (MSI)
  Monitor
  Name HP w2207 on ATI Radeon HD 5450
  Course resolution 1680 x 1050 pixels
  Work the resolution of 1680 x 1050 pixels
  Active, primary, State support of output devices
  Screen width 1680
  Monitor height 1050
  Monitor the BPP 32 bits per pixel
  Monitoring frequency 60 Hz

  ATI Radeon HD 5450
  Manufacturer ATI
  Model Radeon HD 5450
  Cedar GPU
  1002-68F9 device ID
  Voltage v 0.900
  GPU clock MHz 650.0
  Core Voltage 1.000 V
  8.960.11.1000 driver version
  Version of the BIOS 113-AC50800-100 - MI
  Memory Type HyperMemory
  512 MB memory
  Width of the bus 32 x 2 (64-bit)
  Max power draw 20 Watts

  If there are questions please ask.

  Thank you...

  Hello

  The AMD 5450 in PC graphics card will support multiple monitors (VGA, HDMI and DVI).  The 5450 also supports AMD EyeFinity which allows bear monitors of odd size (different resolutions).

  You will get best results by using digital connections to the monitors.  It would be DVI HDMI for w2207 HP and Viewsonic.

  If you have specific questions about AMD EyeFinity, please consult the ATI/AMD forums.

  Good luck and thanks for posting on the HP Forum.

• Portege R500 - anyone using the DVI Port Replicator II on WIndows 7 Beta?

  Hello
  I'm using the beta version of WIndows 7 on my R500 and runnig it's just well except the DVI Port (on the Port Replicator II Slim).
  I have installed this software Fingreprint, battery bluetooth (which are recommended as a solution by the Action Center) and the 'TOSHIBA value added together"which adds the management software of power supply, control over the 2 hardware buttons and gives the FN menu to the screen to control the functions FN1-9.
  I think I can say it's definatively a driver problem, because if I start the R500, the windows loading screen appears on my screen, but when he switches to the desktop, the external screen turns off and the desktop on the screen of the laptop. Also, no chance to activate via FN + F5.
  I tried with the driver Windows 7 buildin, the latest driver from intel (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but none of them work: (unlucky
  BTW: the vga output works, but only UNdocked :(
  Does anyone have a solution or a tip what to do or try?

  Hello!

  First of all, I have to say that Windows 7 Beta is as its name the indicates that a beta so there might be some problems and it s not sure that everything works fine with Windows 7 Beta.

  Your problem: you see the second monitor in the display settings? There you can active it and mark the option extend my Windows desktop on this monitor.

  Lastly but not the least you should do an update of the BIOS if you have n t the latest version.

  Good bye

• How do I receive audio via the DVI port?

  Hello.

  I have a HP Pavilion p6-2378, that I use as a PC Home Theather. The motherboard on this model lacks an HDMI port, which is how the rest of my system connects. I use a HDMI-DVI adapter and video works perfectly, but there is no audio data. Several people told me that the sound signal can transmit through the DVI port. Y at - it a setting or a software that I have to make it work?

  Thank you.

  Hello

  This article could make interesting reading.

  As suggested above by Paul, use a discrete videocard with HDMI.

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• I have a LG LCD TV with a HDMI/DVI port

  I want to buy the Apple TV to connect this TV, but not sure it will work.  Does anyone have experience with the connection of a TV LCD from LG for Apple TV?    I tried to Sony DVD Blu Ray player and he gave me an invalid format.   There is a HDMI/DVI port, no other, so I don't know how to work the Apple TV?

  Display the model number of your TV.

• Workstation HP Z230: how to disable NVIDIA NVS 315 to use integrated DP and DVI ports

  My HP Z230 workstation was equipped with Windows 7 and an NVIDIA NVS 315 video card.  This card works satisfactorily; However, I recently acquired a monitor Asus PB287Q Ultra high definition (4K), capable of a resolution of 3840 X 2160 pixels.  The NVIDIA card DVI by default generates a graph of the 1920 x 1200 resolution. Therefore, I can't take full advantage of the ability of 4K of my new monitor.

  I tried to uninstall the NVIDIA card to force the PC to recognize the video hardware on the motherboard, but none of the monitors connected to the RFP or DVI ports displays video information.  In other words, my PC recognizes that the NVIDIA card (when connected) and nothing else.

  What should I do?  I'm a LabVIEW programmer and a 4K display is a tool powerful graphics-oriented environments.  Thank you for your help.

  Thanks for your reply, Paul.  I tried what you mentioned, but could not get DP working out until I went to the HP Driver download site and downloaded the Z230 Intel graphics drivers: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5367828 & swLangOid = 8 & swEnvOid = 4060

  Now I have a total of 5 outputs (2 DP and 3 DVI) video! I don't have to remove the NVIDIA cards and I full resolution 4K on the outputs video of DP!  Can not be more happy with my output video.  Now the problem is to convince my supervisor that five monitors high resolution are better than one (not-a-chance).  :-)  Once again, thank you.

• Portege R500: What DVI port duplicator would be compatible

  Hello

  Does anyone know what DVI port duplicator supports the portege R500 laptop.
  When I look at the product and its accessories none of the replicators of ports lists the portege R500 as a notebook taken in charge.

  Maybe there isn't one right now?

  Hello

  I also used the Web from Toshiba site Options & accessories search and found the following:

  -Dynadock - USB Universal Docking Station with video (DVI) Phase 2 PA3542E-2PRP
  -Slim Port Replicator 2 PA3603E-1PRP
  -USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP

  If you need additional information on these individual devices then simply google for these reference numbers.

  Good bye

• Tecra A9 does support DVI-port replicator Express

  Hello

  does the Tecra A9 (PTS52E-01T02NGR) support the DVI-port of the express duplicator?

  The manual (for Tecra A9, Tecra S5, Satellite Pro S200) says this, but the screen is black, if I connect the monitor via DVI port. It works using VGA, but poor quality (interference).

  My colleagues all have the same problem. We use different samsung TFT; the operating system is Win XP Pro.
  The manual also says "..." Maybe some DVI monitors can be used... "but before testing the other monitors, it would be interesting if there is no DVI at all...

  Thanks for your help!
  Daniel

  Depends on used Tecra A9, if you can get a picture on the DVI port on the Express Port Replicator (PA3508E-1PRP) or not.
  The DVI port on the Port Replicator Port Express is * supported only on computers with graphics card ATI or nVidia *.

  If you have a DVI INTEL graphics card port on the on the Port Replicator Port Express is * DO NOT supported *.

  Best regards

• Use of DVI port on Port Replicator II with Tecra S11 - 11G

  Hello together,

  I use a Toshiba Tecra S11 - 11G with port replicator.
  I use an external monitor L1950, it is connectetd with VGA cable.

  Now, I want to use the DVI Port of port replicator, but the monitor did not detect the signal.
  Is it possible to use the DVI connection?

  Kind regards

  Michael

  Hello

  Your Tecra A11 does not support DVI port
  The Replicator replicates the ports available for laptop. But if the mobile phone does not support a certain port, then the port replicator is not able to reproduce such interface so I guess that's the reason why DVI ports could not be detected using port replicator.

  PS: did you install the driver provided with USB 2.0 Port Replicator II package

• Satellite A100-192: is it possible to add the DVI port

  Hello

  is it possible to add the dvi port to this laptop?
  ati mobility radeon x 1600 graphics card is the chipset
  supports the dvi and analog component output

  is it possible to add the dvi port
  or component signal output on the d - sub port?

  TIA

  Hello

  There is unfortunately no way to add a DVI port to this machine. The problem is there is no adapter for D - sub to dvi and you can't go to the motherboard of your machine with a DVI connector.

  Boyfriend sorry but it is a fact...

  Welcome them

• sound card for a desktop hp slimline Pavilion model #: s5120y

  where can I find a sound card for a desktop hp slimline Pavilion model #: s5120y

  Why do you need a sound card?

  Computer integrated audio does not work?