HP Pavilion 500-277C Desktop P: DVI Port does not

Similar Questions

• Pavilion Slimline s5510f: Desktop turns on but does not start

  No problem whatsoever with the computer.  On the indicated start screen Windows updates have been installed.   I noticed that the update "failed" and was "back" to forecast position or something to that effect.

  This has happened about 4 days after I tried to leave the HP screen download updates from HP.  The download takes forever and I finished downloading.  Don't know if this has nothing to do with the question or not.

  Used the computer all day and then stop it.  Next day morning hitting the power button, fans have started, a yellow light flickered once and nothing happenn-no beeps.  The screen was black and then a box of monitor State said he was not getting a signal and entered into mode 'sleep'.  Key Board not light.

  I closed the computer and tried a reboot.  Same thing happened.

  I looked at a few HP documentation and videos about the lack of seed.  I did find a simular situation to mine because most people get a cursor on a black screen or an error message.  All my computer is turn on, a flicker of yellow light, fans running and there it is.

  I tried to access the BIOS by turning on the computer and press F10, then F1 but nothing happens at all.

  I removed the memory cards and reinstalled them.  Same thing.

  I removed the memory cards and attempted to start the thing same computer.  No beeps.

  I would like to make the backup disks that I made when I bought the computer.   I hesitate to do something with these discs.

  Any suggestions will be appreciated.  But, what I read in the documentation, it seems as if with no beep with memory cards removed, it is the motherboard?

  If it is the motherboard, does that mean?  Go buy another computer?

  You're welcome, @EarlD1.  Novice, perhaps, but you did a great job!  It is one of the most difficult and scary for some, processes of diagnostics on a computer.

  I read your first post again.  I think that the next step should be to test memory.  There are several ways to test, but I want to do the most simple.  Remove all the memory when the computer is off and replace them one at a time and start.  If the computer starts, the memory is good.

  If memory proves to be good, I suggest that you try to perform a system recovery complete from the recovery media that you made when you purchased the computer.

• HP Pavilion p7-1421 Desktop PC BEATS AUDIO does not.

  Hi, new here with Fortunately my first problem with the office in the subject line.

  Somewhere along the way, the Beats Audio has stopped working properly. The equalizer

  cursor won't move at all, and the button 'Test speakers' emphasis on the left, then right

  speaker, but no sound will be produced.

  For background, I installed StartDoc, a program that gives back to the Windows 7 original 'Start '.

  button and office. Other that that, I have not installed anything except the HP recommended upgrades.

  In addition, the machine is obviously running Windows 8, and I didn't have to 8.1.

  I see lots of questions re specifications page. Beats does not and solutions, but each user is requested

  for the specific model, OS etc. That's why I chose to post a new thread, so that the experts can answer

  my exact machine.

  Thanks in advance,

  John

  Who da MAN? Jaco da MAN! Thank you!

• Windows 7 drivers for HP Pavilion 500-120ea desktop PC

  not downgraded Windows 8 for windows 7 any driver chipset for desktop HP Pavilion 500-120ea so front usb ports do not work

  Hello:

  Here is the usb 3.0 driver which you are interested.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3.0&lang=eng

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• HDMI port does not work

  Original title: HDMI port stopped working after the update.

  This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

  I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

  Update your BIOS can help you too.

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• One of my usb ports does not work. A top forward on a MacPro 3.1

  So I plugged it in a charger to charge a battery. He went for about 1/2 hour then I got a message a lot of power, port and it will stop the port. Something like that. So now the port does not at all with any device. Can this be reset?

  Running OS 10.6.8 snow leopard. 3.1 MacPro Tower.

  Try a reset of the MSC...

  MacIntel: Reset of the controller (SMC) system management

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Tecra A11 - serial port does not

  I have a Tecra A11 running windows 7 Professional (32-bit).
  My serial port does not seem to work as I am no longer able to connect to the industrial PLC automation which requires the connection to the serial port for programming.

  Some of the software I use is a RSLinx, Easysoft and others.

  Any help on this will be greatly appreciated.

  Hello

  The serial port is properly recognized in Device Manager?
  Do you have signs of yellow exclamation point there?

  Try to remove the serial port of the Device Manager and reboot the machine to get this recognized again port.

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• HP 15-AF006AX: USB 2.0 port does not work

  Hello

  I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

  and I am not finding a driver for this, can you help me for this problem

  Thanks in advance

  Hello:

  The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

  You want the first file on the Web page.  Install and reboot the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1