Desktop stops

Similar Questions

• Why is my desktop stop often randomly, at all hours of the day and night without prompting even when I use the computer. This is even though I changed the power option setting.

  Why is my desktop standby stop so often?

  It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.

  It happened like this:

  1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.

  2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.

  3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however.  He showed the computer CPU is entered in mode 'sleep'.

  4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.

  5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.

  6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.

  7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.

  8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...

  9. However, even if the VGA cable is changed, the stop is always the same, as before.

  10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.

  11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.

  12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.

  13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.

  14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.

  15. for more information,.

  My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.

  Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware.  I don't know what problem is.

  I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.

  16. the information contained in the computer, start/program/computer/properties, gives the following information:

  It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.

  It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.

  17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.

  18. I hope to hear your solutions with you. Thank you.

  Run "cleaners" or optimizers may have caused a number of problems.

  And since you have them installed some time ago a system restore won't help.

  Run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/

  Maybe to repair your installation of win

  Ensure that the chipset drivers have been updated by the author of the motherboard

• Remote Desktop stop working after update

  Anyone know why my remote desktop connection did leave work after upgrade to Win 7?  It works in my other computers, so I know that this isn't their server or my credentials.  I checked the box for allow through firewall remote desktop, but I wasn't sure of what other boxes to check.  I don't want to allow access to things that I shouldn't.  Can anyone help?

  Hi t.richards,

  a. do you receive error messages when connecting to the remote desktop?
  b. what updates did you install?
   
  You can check the updates installed in the history of the update.
   
  Follow these steps to see the Windows updates are installed on your computer.
   
  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. in the left pane, click view update history.
   
  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates
   
  Also check if the settings for the connection Remote Desktop is correct refer the links for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection
  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
   
  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Remote Desktop issues connecting from home to work the computer in Windows XP. Remote Desktop stops responding and eventually disconnects.

  Just around the beginning of July (2011) I started to have remote Office questions when connecting from home to work. If I minimize the connection for a while and come back later, it will be often does not. I'll have to hit the close X button several times before, he ends by abruptly disconnects. By the sudden I want to say that I don't get no dialogue usual warning that the session will be disconnected.

  Also, sometimes when I connect I get a white screen instead of a connection window.

  Anyone know if there was a Windows Update, or anything that can cause problems with RDP.

  I used to be able to connect perfectly without any problems.

  Thank you

  original title: Remote Desktop problems for the months spent on XP

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• Windows 7 Aero Desktop stopped working after installing IE9 & windows update last night (and reboot)

  I installed IE 9 beta on Windows 7, then installed windows 2 critical updates that night and restarted my PC.  Aero works does not in the morning.  Here are the errors in the event log:

  Level Date and time Source event task category ID
  Information on 2010-11-07 10:51:21 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-07 10:47:27 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information on 2010-11-07 08:35:57 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-07 08:35:56 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-07 07:59:54 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-06 18:43:23 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information 11-06-2010 15:36:27 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information 11-06-2010 15:32:32 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information 11-06-2010 15:27:04 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 22:26:49 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 22:26:49 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-03 07:46:14 use Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in
  Information on 2010-11-03 06:55:39 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information on 2010-11-03 06:51:52 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 06:51:52 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-03 06:50:30 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 06:50:30 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0xc00002fe)
  Information on 2010-11-03 06:45:15 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 06:42:49 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)
  Information on 2010-11-03 06:22:59 Desktop Window Manager 9007 None the Desktop Window Manager could not start because WDDM is not in use
  Information on 2010-11-03 03:05:55 Desktop Window Manager 9009 None The Desktop Window Manager ended with the code (0 x 40010004)

  For some reason, I have no longer than 11/6 recovery point so I can't roll back.   This utility only difficulty and just sayd that the Desktop Manager is disabled.   I was digging on the net for days, but no luck.  Ideas?  Thank you!

  What video card you are using? You have installed the latest drivers? "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Receptive HTML - change desktop > stop point Tablet

  I'm changing the width in pixels who change from view of the Office for the Tablet and so when the sidebar changes to icons.

  It seems that Javascript is used to remove class open-sidebar to various divs when the screen is reduced below 1300px. I need to change this value to 1200px.

  I could add CSS adapted to do this, but it would be much easier to update the JS. I've narrowed this down to one of the scripts responsible for this to the script \Responsive_HTML5\template\scripts\rh.min.js but I did not understand how it adds / removes desktop/tablet computer goes 'sidebar-open'.

  Someone at - it strategies or options?

  Thank you

  Daniel

  RoboHelp 2015

  Found:

  

• Satellite C660D-181 - BBC iplayer desktop stops working after updates

  BBC iplayer worked until Adobe Air and Iplayer set itself up-to-date. Think that some windows updates can be installed as well.

  Tried to reinstall programs but iplayer now only runs as a process, but not a request.

  Help Chris

  Hello Chris

  Please don t get me wrong, but do you really think it is untimely Toshiba?

• stop drag / move

  I just upgraded to V 10.11.6 and the ability to drag and drop a web address of Safari on the desktop, stop working.

  It works for me. What happens when you try?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• After reinstalled xp key //my board stopped typing.

  Logitech g15 keyboard stopped typing on my desktop after you have reinstalled windows xp and update, all usb ports work.
  When plugged into another computer it works but when I plug in my desktop computer.  some keys work
  except any letter key to type a message do not work? / help
  It is poss, my drivers or a program is missing for my keyboard desktop stopped typing, I have also re-
  the logitech g15 software installed and still does not work

  Hello
  You can try the steps in the link below to fix the problem.

  Windows cannot use the correct keyboard layout when you connect a USB keyboard to the computer

  http://support.Microsoft.com/kb/927824

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Dell V305 stop Mid-printing

  Hello Dell Community,

  This could have gotten double.  Sorry if this is the case.

  I had a lot of trouble with my Dell V305. I followed the instructions of Rock Star Rick to remove and reinstall the drivers, update java and .net, deleting print jobs and others, but I have the same problem again and again.

  The main problem is that the work itself freezes constantly. I'll try and print a multi (and sometimes only) page document and the paper will stop moving in the printer. Sometimes, it is the first page, and sometimes it's the second page. The full percentage on my desktop stops at a certain percentage, and it will not move any further. It varies between right away, at halfway, and even when the work is completed but the paper is still owned by the printer. I try and cancel the job on my computer, but it continues to say "1 (or more) document (s) pending" and will not cancel. I'm trying it cancelling the printer also, but there is a lack of communication and that work gets in the way anything else, I try to print.

  When this happens, I run the program "Deleting print jobs" you have written, but that does not allow me to do it again. The only way that I was able to solve this problem is to restart my computer by removing the brick of the printer and you try to start from scratch. Usually, this allows me to print a page before I have to restart the process. In addition, it seems to work for two or three pages when I reinstall the drivers, but I can't continue to do.

  I've scoured the forums for a similar problem, but I don't see anything, but I may have missed. You have helped a lot of people, so I hope you can help me, too. I implore your wise wisdom and hope that you have an idea of what's going on.

  Thank you

  Steve

  Steve,

  Yes, he displayed double.

  This is related to the IE11 and issue ToolTips.

  Open Internet Explorer, click on help, then click about words of Internet Explorer. It should show the version here. If you IE11, then go to control panel, Windows Update, updates installed, look for Internet Explorer 11. Click Internet Explorer 11, uninstall.

  Restart the computer when you are prompted. Then see if your printer works.

  The other option is to disable the ToolTips for the printer.

  Start, Control Panel, devices and printer, your printer, printing preferences, advanced, more control options. Tell him to never show. The problem with this setting is that you can not tell if you are weak of ink, printer jams, etc..

  

  Rick

• Office distance, MSSQL and TLS 1.0 and RC4 encryption algorithms

  Currently, SSL Labs suggests that SSL RC4 encryption algorithms are low, and that to always mitigate the attack of the BEAST in older clients, TLS 1.0 can be disabled.

  I've read the threads which set out that MS SQL server had problems when SSL 3.0 and TLS 1.0 have been disabled, and also this turning off TLS 1.0 would break Remote Desktop (which this thread seems State requires TLS 1.0 and RC4 ciphers: https://msdn.microsoft.com/en-us/library/aa383015%28v=vs.85%29.aspx)

  See also:

  • https://TechNet.Microsoft.com/en-us/magazine/ff458357.aspx and
  • https://social.technet.Microsoft.com/forums/en-us/e2b22dad-bb0c-4059-BEEC-6673783ab777/remote-desktop-stopped-working-after-disabling-SSL-20-and-TLS-10

  Is it possible to have a Windows Server 2012, which is fully patched, rely on a plu TLS encryption algorithm versions than 1.0 and the MCG (or other)?

  If the answer is that TLS 1.0 and RC4 must be enabled for authentication of network layer, can offer you a better order of practical cipher who would score high enough on ssl labs?

  SSL3.0 and TLS 1.0 can be turned off the coast and have always start MS SQL 2012 (not configured to use SSL connections/sql ssl certificate)?

  Thanks for any input that you are able to give.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Microsoft Router, MN-700 does not connect on IPhone or IPad

  I have a Dell desktop stop it's wireless and Ipad and Iphone. These three have worked a lot on a Microsoft Router, MN-700 10 days ago. At that point, I was not able to connect to WIFI on Ipad and Iphone. The Office is struggling but usually connect after several tests.   The modem signal so it seems to be the router. What happened to cause this not to connect to ' I products?

  I'll be honest. Even when new, this unit had limited configuration options and did not have with active WPA and had a relatively low flow rate. However, it is relatively easy to implement.

  Try to do a full restet and reconfiguration.

  In the long term, replace it with something newer that offers good connectivity n class so that she will behave well with the iPxds. Read the card and consult informed people. Some routers are running well with customers in the mixed class. If n and g are connect, devices of class n gets optimal speed infra - (new) with some routers connections. In particular, check Dell Wireless capablity. It might be possible and beneficial change to add a device of class n.

  Tom Ferguson

• Compaq presario beep and black screen

  Compaq presario sr5450 desktop stop with beep .the beepis on 17 seconds and off for 10 seconds. Ichanged power supplys but still the same beep and black screen

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  Here are the Codes of BIOS "beep" for an HP machine and the reasons why:

  "BIOS Beep Codes.

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c02222922&cc=us&destPage=document&LC=en&tmp_docname=c02222922

  See you soon.

• Problem in the background

  Hello

  When I connect my desktop background windows is black and to customize, I see that it is a picture so I have to choose another theme and Undo to see my background on desktop

  I use bing images

  Hi yasharnesabian,

  If you tried to change your wallpaper on your Windows desktop and it won't change, he has generally three reasons for this: a problem of active desktop or a registry problem or the wallpaper itself is not saved on the hard drive.

  The Active Desktop allows you to add interactive features to your normal wallpaper. You can set a web page for example to be your wallpaper. However, several active desktop will cause problems with changing your wallpaper and other issues.

  If active desktop is already disabled, the problem is usually a windows registry problem usually caused by spyware or adware.

  #1 fix: Active Desktop stop?

  Unable to change your wallpaper or background, repeatedly goes back to Active Desktop. Follow the steps below to remove all web objects to display on your background.

  • Click Start, control panel
  • Double-click on display
  • Click the Desktop tab
  • Click on the button customize the desktop
  • Click on the Web tab
  • Uncheck all items listed in Web pages
  • Click Ok, and then click Ok once more to close the window.

  Now, your Active Desktop wallpaper should be removed, try to change your wallpaper. If you can always change your background, go to the next section.

  Difficulty #2: Check if the problem persists if you open a new user account

  Here is the guide to create a new user account:

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  And http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-7

  Difficulty 3 # save image on the hard drive

  You mentioned that you use Bing images to set your wallpaper. If you looked for a photo in the images of Bing and just a click with the right button on an image and choose set as wallpaper option, the image may not be not available after a restart. So instead option select Download photo in option next time and save it to a specific location

  Last but not least this issue can also occur if your copy of the operating system is not activated or happens to the evaluation period. If this is the case, you need to enable and restart the computer, and then try to change the wallpaper.

  Hope that helps.

• How to stop firefox to shutoff valve of the desktop computer

  have not been able to stop the desktop computer, while in firefox there is no button on the keyboard

  Hi, I'm still not quite sure if I understand your question. However, the stop button is something that will always be handled by your operating system and is usually to be found within the user interface of your browser.

  http://Windows.Microsoft.com/en-us/Windows-8/how-shut-down-turn-off-PC