XP weird errors since I installed LabVIEW 2012

Similar Questions

• Impossible to install labview 2012

  I try to install labview 2012 on my 64 bit Windows 7 system, but fails;

  Here are the symptoms:

  (1) I click setup.exe directly and it shows that:

  

  (2) if I run it with the administrator, it appears that:

  

  (3) I checked that I can execute another exe file...

  Thank you

  Hi Bestchun,

  It could be a damaged Setup file. Try to re - please download the installer of ni.com/downloads.

  I will follow this post, answer so if this does not work for you.

  N

• & quot; An error occurred while installing LabVIEW Real-time 2009 (in English). ...

  While trying to install the real time of the third quarter of 2009 DVD module, I get this error message.

  "An error occurred while installing LabVIEW Real-time 2009 (in English). Do you want to continue installing remaining products? »

  After removing the program OR series (USB) 1.1 installation completed up to the end.  If you answer no to continue to install the above question, the following error message refers to abduction OR Serial.

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• Impossible to install LabView 2012 SP1 (64-bit)

  I've got license for LabView edition student of 2012 and I cannot download mentioned MS. Update says I need membership in the Standard Service program.

  Is what it means that I can't download it at all or there is problem somewhere else?

  I'm running on Windows 8 Pro x 64

  Other updates installed without any problems.

  Thanks for the reply

  Hello.

  I guess not. But you can always write your SN [email protected] license and ask them what products including versions are activated with your SN.

  Ondrej

  NIEE AE

• LabVIEW 2012 Setup error

  Hello guys,.

  I need to install LabVIEW 2012 on my computer (windows 7 32 bit), however, when I clicked on the setup.exe. A popup window to install Microsoft.NET framework 4.0, after, then another popup window to show an error occurred during the installation of Microsoft.NET framework 4.0. Is a conflict of LabVIEW 2012 with Windows 7?  There is a thread discussing this topic. The suggestion it's reinstalling the OS. For the PC here tergiet, reinstalling the operating system is not an option. Is it possible to go over the installation of Microsoft.net? or any other suggestions? Thank you very much!

  right after the update here.

  Microsoft .NET must be installed separately here. After that has been installed, the installation of LabVIEW 2012 could spend...

  Thank you

• How do we install support for labview 2012 sp1 64-bit

  Hello

  I downloaded and installed Labview 2012 sp1 64-bit and

  the installation requires a drive support.

  Where can I download a dvd for 64-bit Labview support?

  Thank you

  desiko

  You must install the drivers again so that it will install support for the 64-bit version of LabVIEW.

• Why LabVIEW 2012 does not support USB-6009?

  Hi all

  I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5.

  What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error."

  If someone has an idea to solve the problem, please let me know.

  devkotaj

  Hi devkotaj,

  The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me.

  What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here.

  I hope this helps!

  Andy C.

  Engineering applications

  National Instruments

• LabVIEW 2012 Patch f1 crashes

  I just installed LabVIEW 2012 and unfortunately I've met a few worries.

  I got one "Installer has stopped working" when I installed device drivers.  But the installation seems fine.  LabVIEW began and MAX would open up.  I wasn't looking to connect to any material yet.

  When you try to install the fix for the f1, LabVIEW crashed again.  Net subsequent attempts the same thing.

  Has anyone else had this problem with the patch?

  It's on a Win7 with 8.6 and previously installed 2011 LV machine.

  

  Even if accidents are reported, all seems to be installed correctly.  It just seems like Windows is confused when the installation program stops.

  This seems to be a problem with Windows on my machine and not a problem with LabVIEW.

• SMU 8135 cannot ping pc when installing labview

  HJ. Help me

  my laptop do not install labview 2012 can ping with SMU 8135 but labview installed on my laptop cannot ping with SMU 8135. I don't understand

  Hi ffefef,

  Could you explain in more detail the question, you encounter?

  Thank you

• Just LabVIEW 2012. Why am I being asked to download LabVIEW 2011 SP1 f2 RTE Patch?

  Hello

  Recently, I got a new machine (clean install of Windows 8) and installed LabVIEW 2012, with no other previous versions. However, when I ran the Service OR day, he registered "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as an update is critical.

  I'm confused; I accidentally installed LV 2011 too?

  Thank you

  No, you did nothing wrong.  time engine run freely installed with LabVIEW 2012 to record for previous versions.  Install the patch.

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• LabVIEW 2012 Installation error connecting to the server

  I'm trying to reinstall LabVIEW 2012 after I.S. replaced my laptop.  The new laptop is not a DVD, so they transferred the DVD and transferred the files from the DVD to a folder on my desktop.

  I select the option connect to OR check my serial number, enter it and select "Next >."  I immediately get an error message saying "an error has occurred on the server.  You want to try again? »

  It is that I can get.  If I click 'Yes', I get the same error.  Can someone point me in the right direction?

  (There is a Windows 7 computer)

  Thank you

  oxfat

  Oxfat,

  There could be some problems going on because of the age of the installation of LabVIEW and physical media that it is installed from. I think the process easier for you to generate an activation code based on your serial number you can do with this site:

  http://Delta.NI.com/nilg-activate/JSP/customer_activate_details.jsp

  In addition, here are some other options during activation if you always encounter errors:

  https://www.NI.com/license/product_activation.htm

  Finally, here's official National on activation in case tool tutorial you want to send this to your business in order to avoid future problems:

  http://www.NI.com/white-paper/11039/en/

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Error Code HDL with CRio RFP generation after update for LabView 2012

  Hello everyone,

  I use a CRio DP Comsoft master/slave module for my communication with a PLC system. The application worked perfectly under LabView 2011. After the update to LabView2012, I got an error message that the HDL Code generation failed. After that I've updated also the Software NI Profibus CRio in Version 1.3, but this n ' t´t solve the problem. The next step was to use the example of project code "CS_cRIO-PB_DP-MasterExample" which was delivered with the new NI CRio Profibus software. Even with this code example, the problem still exists. For detailed information on the configuration and the error message please refer to the screenshot. Any help or idea would be appreciated.

  Jürgen

  Hi Jürgen,

  I looked inside and could reproduce this error. Somehow the compiler with LV 2012 has problems with the coded 8.5.1 Subvi LV. Please use the attached VI and copy it to the following location. (\\Program Files\National Instruments\LabVIEW 2012\vi.lib\addons\Comsoft.lib\cRIO PB)

  Before do you it please close your LabVIEW.

  Then try to compile again.

  Let me know if it still does not. We are currently working on a new installer that will correct this problem.

  DirkW