Desktopo ICONS is more you take to .exe for the requested program files

Similar Questions

• I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

  I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

  Hi DanBourque

   

  1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
  2. for how long have you been faced with this problem?

  3. did you of recent changes on the computer?

   

  You can re-register Windows Installer and check if this helps-
  a. Quit all Windows programs.
  b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
  c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
  d. restart your computer.

  I hope this helps.

• When you take a Flash inside the shutter remains open as if you used no flash.

  When you take a Flash inside the shutter remains open as if you used no flash. The anti-shake icon is visible in the viewfinder before a picture is taken.

  The handshake that you see indicates that the device is set to use 1/30 of a second shutter speed or slower. This explains the symptoms you describe. There are other parameters that will allow you to do, but the first thing to check is to make sure that the flash setting is not set to slow sync menu.

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• How do you take a stain on the face of a person in PSE 7?

  How do you take a stain on the face of a person in PSE 7?  Is there a video tutorial out there for this, or is there a simple explanation?  I have

  Enjoy anyone help on this.  Thank you!

  Find the spot (the dressing) heal tool. Make the size of the brush only as large as will be the cover of just the task, click only once.

• My computer takes much longer for the initial start as before?

  Original title: startup

  my computer takes much longer for the initial start as before?

  I suggest to do the following:

  (1) Windows Update and install all updates

  (2) run disk clean up and defragnment

  Check disk run 3)

  Check 4) Add/Remove programs and uninstall programs you want

  (5) run full system scan, with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also take a look at:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• Why it takes so long for the BlackBerry vendor to deal with accounts?

  Why it takes so long for the BlackBerry vendor to deal with accounts?

  I put in my request 3 days ago, and it has not yet been verified.

  Hello

  Could you please PM me your name of the seller? Do you get the email that asks you to send the document ID/commercial? If this isn't the case, please try to chcek your spam folder.

  Kind regards

  Satya

• You have enough privileges for the operation. Please contact your system administrator.

  Hello

  We are modernizing 12.1.3 to 12.2.4

  We have a custom workflow that sends the Notification.

  Notification consist of link (a link that directs to the custom function)

  By clicking on this link, we get

  Error:
  

  You have enough privileges for the operation. Please contact your system administrator.

  Actions taken:

  Active: WF_LOCAL_USER_ROLES, WF_LOCAL_ROLES, WF_USER_ROLES, user who receives Notification required roles.

  Checked: Function that is called by clicking on the link is affected under which the user is responsible.

  12.2.4 there everything must be given more subsidies?

  Please advice what to do to fix this problem.

  Hi AJ,.

  We have the solution to this question in my other thread, thank you for your support

  Call the Notification Destination URI

• Geocoding takes VERY long for the first call in each session

  Hello
  
  We are moving to a system of very short response time where the user sends a query via mobile phone to our based Oracle server and the response THAT SMS must return a list of points of interest at a certain distance from the mobile phone.
  
  Previously we were using Oracle 9i, now we went to 10g (EE 10.2.0.4.0). Given that 10g supports geocoding out of the box, we intend to use it. What we are experiencing, this is when we create a new session, and then the first geocoding/reverse_geocode call takes about 1 minute in our test environment (that means 100% CPU load on the side of Oracle Server), the following calls are in the [http://0.1.. 0.6] second intervals. We only use sdo_gcdr.reverse_geocode () and sdo_gcdr.geocode () procedures.
  
  In a space book, we found:
  + "Note: the first call to a function of geolocation in a session requires several time (is longer) than subsequent calls." +
  "+ Is because the function must load and analyze arrays of profile". +
  
  Profile of tables do not change, why is he not analyzed at the start of the RDBMS and only once, not for each session?
  
  Is there a solution?
  
  Kind regards
  Tamas Szecsy
  
  Published by: Tamas Szecsy on March 7, 2009 10:30
  
  Published by: Tamas Szecsy on March 7, 2009 10:30
  
  Published by: Tamas Szecsy on March 7, 2009 10:41

  The patch that I suggest is precisely to allow the geocoder to work effectively in many countries. Its effect is to only load the profile for the country being geocoded. If profiles are loaded progressively as needed, avoiding the High overload at the beginning. With this patch, the first geocode a meeting is second.

  The time you specify (a minute for the first geocoded in a session) clearly indicate a problem. If this problem is not with bad indexes on the table of the region, you can check the box caching (CACHED_ADMIN_AREA_LEVEL in GC_COUNTRY_PROFILE should be 0).

  I think yiou need to capture a complete SQL trace of this first geocoded, so we can diagnose accurately what is happening.

  Albert

• When I start the computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error.

  a.o.a, when I start computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." Here again, box comes and says bad googleupdate.exe Image.  I open the cutting tool, then again the box comes snippingtool.exe - Bad Image. Please solve my problem

  Original title: bad image

  Scan the PC for malware http://www.malwarebytes.org/antimalware/

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• The OFA error: you have enough privileges for the operation. Please contact your system administrator. (Hello world does not)

  Hello

  My business that we are upgrading to R12.2.5. I downloaded the latest patch from metalink jdeveloper and trying to configure jdeveloper. When I ran Hello World program I get an error of "you have enough privileges for the operation." "Please contact your system administrator."

  I have facility for all the configs needed in the project but still is the same.

  
  When I fell on the debug mode. I got the same error with the missing config file.

  Please check below the debug message:

  November 4, 2015 16:47 oracle.adf.share.config.ADFConfigFactory findOrCreateADFConfig

  INFO: oracle.adf.share.config.ADFConfigFactory no META-INF/adf - config.xml not found

  Help me its urgent.

  Thank you

  Thanks for the reply to my post.

  I used the position and he help me solve the problem.

  As I'm working on R12.2.5 which is the latest version of oracle, so the solution was not entirely correct, but helped me dig the real solution.

  After that the implementation of Jdevloper below is the steps I followed

  1. change the profile FND option: validate IP address - no

  2 al ' Jdeveloper go to tools--> embedded OC4J preferences--> Global--> starting--> address local IP select by default.

  It helped me solve my problem.

  Thank you

• We have created a responsibility custom to access the Collection of quality RESP results, we get an error - you have enough privileges for the operation. Please contact your system administrator.

  Hi all

  We have created a responsibility custom to access the results of Collections only HTML page.

  Details of the liability and the Menu are also less

  Name of the RESP: XX QUALITY

  Application: Quality custom

  Menu: XXQA_QUALITY

  and there is no attached grp applications.

  Definition of menu:

  Menu name: XXQA_QUALITY

  Description of function for the submenu SEQ invites

  10 quality Workbench results results collection begins Page quality Workbench results Start Page

  quality of view finds quality results 20 results display quality results

  We show only this specific user responsibility and whenever it tries to access the page "Results from the Collection" he gives us an error.

  "You have enough privileges for the operation." Please contact your system administrator.

  
  

  If we attribute an RESP of super user of quality to this user, it allows to access the form.

  
  

  Can you kindly help us to find a solution to this problem.

  
  

  Thank you

  Maury
  

  Hi all

  I guess I found the answer,

  I need to join all the submenus that are part of the HTML Page.

  Results from the collection			Results of quality Workbench Start Page
  Nonconformities			Quality Workbench nonconformities homepage
  Corrective actions			Quality Workbench action homepage
  Consultation of lots of Skip			Lot of Skip quality Workbench Start Page

  Have they added those. and it worked.

  Thank you

  Maury

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini