Qosmio G10: TV Tuner does not?

Similar Questions

• Qosmio G40: TV Tuner does not not in Windows 7 64 bit

  Hello

  After months of patience and according to the pilots-info on the Toshiba site, I found it was time to replace my ultimate Vista32 with Windows7 Ultimate. It seemed that all drivers now have a 64-bit Windows 7 version, missing drivers / software could be replaced by the 64-bit versions of Vista. Unfortunately, I had some problems with TOSHIBA PCI TV DVB-T/Analog hybrid Tuner.

  Search a couple of ours for a sollution to this problem of TOSHIBA PCI DVB-T/Analog TV Tuner hybrid (x 64) with Windows 7. In the hardware Manager, it shows a yellow triangle with an exclamation point, telling me that there is a problem with the device. Through the properties, I get an error with code (39).

  I downloaded the drivers from the Web from Toshiba site that returns the following files:
  tisdbt1a64.cab
  TISDBT1A64.inf
  TISDBT1A64.sys
  and a "setISDBTDriverParameters" additional-regkey.

  (1) when I try to replace the drivers by through properties in devicemanager, I get a message back that the best drivers are already installed and there is no driver better is found.

  (2) install manually
  There are no instructions to install the downloaded files, or the registry key. When I try to install the "INF" with right click, I get an installationerror selected file inf does not suppoert this installationmethod.

  (3) when I try to use 'install the old hardware', the system ends in blue screen when the driver is selected and installed. After startup, the system falls again into blue screen. So I had to remove the device by using "save mode".

  (4) I also tried to install Vista 64-bit, the same behavior as (3)

  (5) I tried both 2_1_11-ISDB-T TV and TV-Tuner-2_1_1_0 Tuner. However, IMHO the former should be used.

  Finally, I reinstalled the system full (from scratch), but same problem occurs.

  Any suggestions? I found various threads on just the tips are given. Almost no one describes a sollution to work.

  I have not found a sollution

  Hello

  Try the driver for G50
  Some users here in this thread have been able to install this.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=182538

• Qosmio G35 - TV tuner does not work in Turkey

  I bought G35-AV650 of us (ntsc) and it does not wotk in turkey (pal)
  is it possible to change NTSC to pal
  Thanks in advance

  CEM

  Hi Cem

  I hope that this document will help you http://support.toshiba-tro.de/kb0/TSB4600QF000OR01.htm

  Good bye

• How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

  TT2

• I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  I downloaded Itunes 12.3.3 and now I tunes does not recognize my Ipad or Iphone. I went through all the procedures and just uninstall and reinstall. Please fix 12.3.3.Thanks.

  iTunes: fix iPhone or iPod not detected Windows 10

• Qosmio X 70 - name Qosmio on the lid does not illuminate

  You just bought the laptop Toshiba Qosmio X 70, but the name Qosmio on the lid does not,
  Anyone offer help please?

  Do you mean the Qosmio logo that appears on the top lid?

  As far as I know that you need to activate lighting (backlit keyboard) in order to obtain the luminous Qosmio logo.

  What Qosmio X 70 model you exactly, and it supports lighting?

• HP Pavilion g7 1178 AC: windows jingle/tune does not sound and the start up programs do not start before the RESET

  When I start my computer, I have the lock screen, enter my PIN and then nothing really happens, I get all the blank screens or error messages just my old image of the windows desktop 7, then I RESTART my pc and then I get Windows Small Volkov song/jingle/air once it starts again , then my lock screen and then my start up programs start at work, bitdefender, toolwiz and things are working properly.  I removed my old windows, clean up the files using the disk.

  I do not understand why the windows little tune does not make its sound until I restart?  Does this mean that windows is does not start properly until I restart?  And would that be why my bitdefender is does not properly start as well. ?

  I checked in the Task Manager after the first start-up, he said that the two programs have been activated, but they do not work properly.  I checked bitdefender and it also says that it is on the startup list, but why he doesn't have the things I have planned to start rebooting?

  It is very frustrating having to start my pc, wait a while, then do a reboot to get things every morning.  Suggestions, ideas, help would be greatly appreciated.

  Thank you for your time, sincerely, Niki

  I too was wondering why * nothing * played, even when I had checked the box "Play Windows startup sound" in the advanced sound settings > Sound > sounds section. After a LOT of research (that brought me here, among others) here are the "definitive"...
  
  "By Raymond Wong2015-07-31 13:30:22 UTC.

• Qosmio G20-139 of the United Kingdom - TV tuner does not work in Libya

  Hello

  My name is m, k, sh I live in Libya.
  I bought Qosmio G20-139 until now it works normal but I would not use this pc to look at the possibility of using satellite channels. I get only the small screen in the screen of my pc.

  In the operating manual of the said (tv tuner may not only work in the country of purchase. means to the United Kingdom only)
  My equation, what can do to solve the broblem.

  Can I install any software for example or another TV tuner?
  The tv tuner in this pc, what they said is integrated.

  Thank you very much

  Hello

  I think that the UK tuner will not work in Libya due to different video standards. I m talking about different settings PAL and NTSC.

  In your case, it would be desirable to use an external USB DVB - T tuner (if DVB - T is available in Libya) that supports PAL/NTSC in Libya settings.

  I think you have to look at some stores for local laptop/computer and should ask a few merchants for details.

  Welcome them

• TV tuner does not work with SP1 Vista32 on Qosmio G30

  Hello

  My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

  Did someone knows a solution?

  Your Ruediger

  Hello Ruediger

  I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

• F20-137: TV Tuner does not work on MCE

  I just purchased a Qosmio F20-137 and when I set up the TV Tuner (DVB - T) I had no problem. However when I try to watch TV on Media Center he frequently stutters and loses its signal (about once every 2/3 minutes). I tried a couple of different antennas ready (DVB - T), but the problem persists.

  I thought it was due to the TNT being strong enough signal. However I recently bought a £45 Freecom (DVB - T) usb to my desktop and it rarely or never stutters or loses its signal. The USB device does not work on the Qosmio so that I couldn't try on that.

  Is that what this indicates that there may be a problem with my laptop? Or can anyone suggest a possible solution to the problem?

  Thank you

  [Edited by: admin November 26 05 08:32]

  Hello

  Well, it s a strange question.
  Have you tried to watch TV via Qosmio player?
  In my opinion, you should check if this problem occurs when the Qosmio player.
  Please check.

  Good bye

• Qosmio F60 - display environment does not support protected playback

  Qosmio F60

  When I tried to watch a disc blue ray through a plasma phillips TV 50PF9960/69, the television and the computer displayed the following message "your environment display does not support protected reading content". Phillips responded that the TV is HDCP. I can watch a DVD on the TV through the same optical drive. Y at - it the problem with reading discs Blue ray on a Qosmio F60 in the TV?

  The blue ray disc displayed on the computer without any problem when it is disconnected from the TV.

  Do any one help please?

  Hello

  I read in some forums on this error message.
  For the most part this message if one of the devices does not support HDCP.
  It seems somehow the HDCP key has been lost between 2 devices (monitor and laptop).

  On the other hand, the CD/DVD drive can be assigned to another region of the country.
  If you want to play DVDs created for other regions, then this error code could appear generally too.

• Qosmio F50 - Fn + F8 does not

  Hi all

  I have a Qosmio F50 - 10Z. Everything worked fine when I got first it - a couple of years now. But at some point the fn + F8 rocking has stopped working so that it can no longer use the wireless connection.

  He used to switch between the different symbols, I would choose "All On" and he would happily link. No symbols appear now, so I can't connect wirelessly. The wireless forward button left of the laptop working (turned on) and sometimes, if I do a reboot to safe mode, it can connect wireless on its own.

  You can probably guess I am quite technical, although I tried a lot of things on the net, I'm puzzled. If anyone has any advice, I would be very grateful, it's driving me potty stuck upstairs in the back room!

  p.s. the other fn keys work

  Hello

  As you probably know n t, the VAP (value added package) and the Support of Flash Card Utility control the FN keys.
  I recommend first to refresh the memory Flash Card Support utility.
  Go to start-> all programs-> Toshiba-> Card Support Flash Utility-> restart

  If this does not work, reinstall the Flash Card Utility Support

  Good luck

• Qosmio F10 - Media library does not start

  Hello

  I have a Qosmio F10. My media library does not start.
  I get the message the application did not work properly. OK to close the application

  Someone please advice me what to do.
  Thanks in advance.

  I agree with Akuma. At the end you must install new OS. As already wrote Akuma, back up all your important data and use recovery for any new OS install media.

  It is a radical method, but most effective. ;)

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Qosmio F10: Recovery DVD does not work?

  Hello. I have a qosmio series lappy F10 series well well I still get random stops, crashes and error log every time that I start.
  It's been very disturbing to me. I tried to use the system recovery cd, that I got with my laptop and when I followed the procedure in the user manual it starts the recovery then flashes that my system does not support recovery.

  Is this normal especially when I had my restore disk with my laptop. I want to reformat my drive hard back to the factory settings and it was completely wiped out with having to buy a new hard drive and windows xp.

  What I do and how can you help me in this? I'm at the end of my teather as one of my tasks is a dj from the internet and I can't keep crashing in the middle of my streaming. I don't want to lose my job!

  Help, please!

  Hello

  Very strange! The fact is that you cannot use the different recovery CD because each recovery CD is designed for a Toshiba laptop model. For example, you can not use a Qosmio F10 on a Qosmio G20 recovery CD.

  However, I assume that you use the recovery CD provided (as you say) and the recovery procedure should generally work without any warnings or error messages.
  I think there is something wrong with the CD. Maybe the wrong CD was shipped with this laptop?
  I recommend to ask the Toshiba ASP in your country. Here, you can also order the new CD.

  Good bye