Detail seen different in order to develop and in the Loupe

Similar Questions

• How to develop and test the application mobile flex without the real device?

  I'm trying to read some information about it, but decided to ask also here.

  I have a project that has a company wants to grow me, it's for iPad. That's ok I am with Flex and the framework for web development, but not for mobile. Why? Because I have no idea how to test my application. I know generation ago it sort of the desktop version of the application with the change of the "back" button on the orientation stuff, but how do I know my application will look and work exactly the same (I mean NOT performance here). I mean you know how every android or iOS device have their native keyboard or native video player for example and I have only in the debug version of the application.

  The question is how to develop this application based on the desktop emulator or anything and then hope that my app looks and works on a device, as it should... Of course I can't afford to buy all the devices it is just to be able to test on it if necessary? So, how do you, how to test how my iPad app works on a device without a? I know I should get a licence from iOS dev to be able to package the app for iOS, but it's $ 99 per year or something like that I can handle, but how to test my application without having to buy the darn device? Are there any emulator for iPad or something like that I know what my customers will see when they get the application? One of my friends told me that the mac os x use the developers a tool - cause some kit of dev who has emulators for all iOS devices and you can build and test there immediately and that you can simulate virtually any combination of key for example, and he said he's working and seems to 1:1 as the real device but he didn't know if can I export an AIR application and try it like this, he only knew for app written in native code.

  If someone can just tell me how should I do this? Should I buy a mac os x computer laptop to test because I am a user of windows 7, or perhaps create a mac os x virtual machine and tests out there or maybe the only option is to actually buy the device... that would be terrible for a freelancer...

  I hope someone can save the day here! Thank you.

  F

  Since the AIR for iOS applications are compiled to ARM code you will not be able to run on iOS emulators running on Mac OSX.

  You can do a very simple test with the "Simulator" built into Flash Builder, but it is not much more than a window to AIR with a window size that matches the resolution of the selected iOS device.  When running in the simulator of the application is not compiled to ARM code so it will take a completely different code path than what will be the final release of iOS.

  Ultimately if you are developing for iOS with AIR nothing but for tests on real iOS devices.

• Can I order vista sp2 and all the other updates on cd-rom, as I have limited internet access, with a telephone modem prepaid, Email removed for privacy

  I run an Acer Aspire, Windows Vista home basic sp1, Mobistar connected download capassity only 250 MB

  No I know not. See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/f6c7f79b-b88d-490f-8542-e57b1ff3cf6f

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot find my device names in order to try and find the drivers.

  I have this old Dell XP which was a great computer since 1995. Now, a couple of weeks, I had a crash severe windows and as soon as I got that bootable blown hard drive crashed. So I had a total reinstallation of Windows XP Edition family. It was no problem until I tried to go online. All I have for the Ethernet controller is a big yellow question mark. It is the same for the Audio Controller. the Modem and the controller video, basically everything that I need a driver for.

  What I need is for someone to tell me how to find out what I need to know which of many Ethernet controller drivers, I need. I can then fix the rest by myself. The platform I am working from now is a Vista system and this is where I have to download the driver I need. I put it on a flash drive and carry to the Dell and install it there.

  Getting desperate here... I lost a ton of software but I can live with that because I got the important stuff backed up.

  Thank you;
  The Dukester

  All this and you never specified the MODEL of the Dell system.  ;-)
   
  Probably with that and/or serial number - you can get the drivers or at least a list of what you need...

• I need to disable a device that I do not have access to in order to install and activate the XI Acrobat on a new device

  Anyone know how to disable acrobat adobe XI on a device that I no longer have access to.  I need to install the software on a new device and it has reached its limit of activation

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

• An older version of Adobe Creative Suite is installed on my computer (iMac). This version is no longer valid. I ordered creative cloud and then the installation is you asked the product code of the Suite. I have the old code entry and it say that it is no

  How to install Creative cloud when an old version of the Creative Suite is still installed?

  Please take a look at this document and see if it helps:

  FAQ: What should I do if the creative cloud invites me for a serial number?

• Deploy the ADF - BC on different JVM (not a cluster) and update the same row

  Hi experts,
  
  I have a question for the locking of ADF BC. Suppose I have a web application that you want to add using add-British Colombia. And the web service interface is enabled for ADF - BC. In this case, what happens if I try to deploy as follows
  
  Deploy the web application ADF with add - bc on a JAVA virtual machine and the other JVM deploy only the Add-bc with active web service. In this case how the locking of the database will work. Incase if I change the line in the ADF, faces and then try to update the same line using the web service in the another JVM. Framework will lift the ADF line locked by an other user error? Or the locking works only if both are on the same virtual machine JAVA or deployment in the cluster?
  
  Thank you

  It depends on how you define your lock mode to work in British Colombia of ADF - but assuming you are using optimistic locking - it will be work well since the ADF BC lock will check whether the data in the DB has changed and then throws an exception in letting you know on the subject.
  http://docs.Oracle.com/CD/E24382_01/Web.1112/e16182/bcstatemgmt.htm#BABHBIAB

• FAQ (26): I installed a different version/version of Windows and now SDM will not show me updates.

  I installed a different version/version of Windows and now the SDM does not work in "Update" mode

  This can occur when some system that HP did not specifically tests with the model is installed and often happens with models and Windows Ultimate edition (or even 64-bit editions on some older models) before Windows 8 Ultimate.
  
  Because SDM detects the new operating system, but it cannot match in the SDM catalog, he (SDM) will disable mode "Update."  However, please note that you can still use SDM mode 'All products' to download your SoftPaqs by doing as follows (the Probook 4730 s is used as an example):

  1. Press the "view all products" in the SDM toolbar
  2. If a dialog box warning that "no operating system have been selected, then skip to step.
  3. Press OK to close the dialog box.
  4. Check the «Microsoft Windows 7 Professional 64 Edition»
  5. Click on the tab "language filter".
  6. 'English - International' is checked.
  7. Press the OK button.
  8. Now, expand the tree on the left side of the SDM application by selecting the following:
  9. HP Probook Notebook PC Series 4700
  10. HP Probook 4730 s Notebook PC
  11. Microsoft Windows 7 Professional Edition 64
  12. Check the box 'international - English.
  13. Press the button "find available SoftPaqs.
  14. After "things calm down", click on the button "See the last SoftPaqs" at the top right of the application of SDM.

  The latest list of the Softpaqs for your model should now be displayed. We recommend that you download all listed SoftPaqs. This whole new way SoftPaqs are released for this model will appear on the top list titled "Available SoftPaqs" display.

  To install a SoftPaq after downloading, do the SoftPaq to the ListView "Downloaded SoftPaqs" right click and select "install SoftPaq.

  Important note: most SoftPaqs listed using the method above should apply to your model, but a small number of SoftPaqs might not be applicable to your model due to the offers of different material for your model. This means that not all listed SoftPaqs will install on your model and that is normal.

• Want desolde/resolder, remove and replace the two damaged usb2 ports

  I have a Sat A30 perfect by all means other than 2 USB2 ports on the back that are damaged (black plastic seperaters between connectors jumped) not quite sure why this happened because I was simply unplug the connected usb plugs on both occasions.

  The connectors were not especially tight. fault is I have no insulation between copper connectors which are still found in the slots and causes a short circuit, when I plug in a usb device.

  I bought a card mother relpacement (damaged) and usb2 connections are OK! Have good technician experience in carring out Soldering/desoldering and has all the tools. Problem is that I have not the slightest idea what connections under the Board of Directors are required to unsolder my damaged usb2 card in order to remove/swop and perform the necessary replacement.

  I'm sure I'll be advised to contact an authorized reseller of Tosh. I tried this and they say that they will be already only the motherboard together and the cost is horrible. I would rather make the repair myself that's not rocket science.

  The techies out there who could counsel with picture of the relevent pins to desoldering in order to remove and repair the fault would be greatly appreciated.

  E-mail: [email protected]

  If you can help in any way or point me in the right direction to go repair.

  I hope someone can help. Thank you very much
  Stewart

  Hello

  Please don't be crazy about me, but in my opinion, is not a very good idea to open the notebook alone if you don't have a lot of experience with it. Laptops are designed on the specific way and exchange of material is not so easy as the exchange of material to work stations.

  Believe me that a small error in the assembly/disassembly procedure can case damage to equipment or the façade of the same laptop parts. I know that there's not much service partner assistance because they want to do. It costs money, but you must understand that if they give that kind of advice or information they may close the shop very soon.

  You can try to do it alone, but at your own risk and be careful.

• Involuntary and moving the hidden columns after correction in the SQL

  Hello

  I am very new to the APEX and created an interactive report. I was to adjust manually using SQL column name in the Source of the region box and noticed one of my columns moved to the right of the report.

  When I unstapled "column_name" AS "column 1" disappeared from the column of the report.

  I cannot find any setting where it is specified as hidden, and when I click to filter the report via the Actions button, it appears under the section 'Other' under the section 'displayed '.

  Is there an easy way to display this column?

  Thank you very much

  Matthew

  1135826 wrote:

  Please update your forum profile with a recognizable username instead of "1135826": Video tutorial how to change username available

  Always include the information referred to in these guidelines when you post a question: How to get the answers from the forum

  I am very new to the APEX and created an interactive report. I was to adjust manually using SQL column name in the Source of the region box and noticed one of my columns moved to the right of the report.

  When I unstapled "column_name" AS "column 1" disappeared from the column of the report.

  I cannot find any setting where it is specified as hidden, and when I click to filter the report via the Actions button, it appears under the section 'Other' under the section 'displayed '.

  Is there an easy way to display this column?

  After adding new columns or change the names of columns in an existing IR, you must select them for display as developer and Save the new report as the default main.

• Problems with slot-shaped table and set the values of column

  Hello
  
  I have a problem with a tabular presentation.
  
  I have two tables
  
  P_detail and table v_master
  
  columns of v_master:
  v_id
  v_Name
  v_info
  
  columns of p_detail:
  P_ID
  p_master_fk
  p_name
  p_info
  
  I want to have a tabular presentation where I can store permanent data retail values. That's why I want to keep the default main column join the detail columns.
  In SQL, I can do this with an outer join:
  
  SELECT m.v_name, d.p_master_fk, d.p_name, d.p_info
  OF v_master, p_detail
  WHERE v_id = p_master_fk (+)
  
  I get the lines that exist for the master data and can add values for the columns of detail. I removed the "add lines" because that makes no sense, because the amount lines are already offered at the opening of the tabular presentation.
  
  Now, I want to get/save the v_id (main table) in the p_master_fk column value
  
  How can I do this?
  
  Thank you and best regards,
  Matthias

  Hello

  One approach is to use a database instead trigger. If you define a database view using the query:

  SELECT m.v_id, m.v_name, d.p_id, d.p_master_fk, d.p_name, d.p_info
  OF v_master m, p_detail d
  WHERE v_id = p_master_fk (+)

  Then, create a trigger on the view that will insert in the detail table if d.p_id is null and update the secondary table if d.p_id is not null instead.

  The Apex tabular form is then based on the view (with identifiers like hidden columns) and all treatments multirow Apex should work without modification.

  Rod West

• How to run SQL and export the results to Excel

  My task is to run a custom SQL script and create an Excel file through SQL Developer running from the command line (called by a scheduled script). Is this possible using SQL Developer?
  
  First, the thing I will try is to run a report user-defined in SQL Developer and save the results in an Excel file. Only 16000 result lines, but took 10 minutes to do the export and still cannot complete. Is there another way to do it?
  
  Thank you very much.

  Can't be done, but this is requested already exchanging SQL Developer, you can vote here and add weight to the possible future implementation.

  Kind regards
  K.

• Bug: Details of body inaccurate package SQL Developer 4.0 and 4.1

  I went through the trouble to recompile the schema SYS with native = PLSQL_CODE_TYPE and PLSQL_OPTIMIZE_LEVEL = 3. I found that it was unwise to change the PLSQL_OPTIMIZE_LEVEL for package under SYS specifications, so I left them alone. When I query the view of ALL_PLSQL_OBJECT_SETTINGS, it shows me that my Package body are properly compiled at level 3 and the specs are still 2. However when I look at the Details tab in SQL Developer 4.0 or 4.1 last Early Adopter, it shows the it is PLSQL_OPTIMIZE_LEVEL = 2. I did a test for the PLSQL_CODE_TYPE and the details of body in SQL Developer also follow the specification and not true values. I used the sub query to verify the real compile settings.

  SELECT owner,
         name,
         type,
         PLSQL_OPTIMIZE_LEVEL,
         PLSQL_CODE_TYPE
    FROM ALL_PLSQL_OBJECT_SETTINGS
   WHERE owner in ('SYS')
     AND type IN ('PACKAGE', 'PACKAGE BODY')
   order by 1,2,3;
  
  
  

  Thank you

  Steven Wilson

  The query we use does not take into account, there may be several entries for an object in the view. I think we have a bug. You connect.

• Dominant development and Modules of different color Navigation

  Hello, I have problems with the color cast on the photos that I made in the develop module and the result I get when that photo is exported.  I use Sony raw files.  They are developed and exported but show a different (more yellow) color in the version exported to what I see in LR.  I use the windows viewer standards - I understand can see colors differently for LR, but I recently upgraded to LR CC LR3 and did not have this problem in LR3.  The Navigation module also shows the same color as the exported photo.   All the photos are considered on the same monitor, so don't think it's a matter of calibration.  If the Navigation module is identical to develop I suppose it's the difference between LR and the Windows Viewer.

  If develop and library is displayed differently, you have a broken screen profile. Recalibrate.

  gazz_za wrote:

  All the photos are considered on the same monitor, so don't think it's a matter of calibration.

  It is a common misunderstanding. Apart from the adjustment of the basic parameters in the monitor, the calibration process also produces a profile, which is a complete and detailed description of the screen in its now calibrated State. The profile is much more detailed than the calibration.

  This profile is used by applications of color only, to a conversion of standard profile. These converted RGB values are sent to the screen. Apps that are not color managed ignore profile and just send the numbers straight and unmodified RGB on screen.

• Playlist running different order on iPhone and iPad

  This question has frustrated me before I have only accepted, but now I need to get it sorted.

  I just create a new smart playlist on the MAC (most recent operating system, etc.), there only about 15 titles at present.

  My system is set up so that my iPhone and iPad automatically synchronize with Mac, etc...

  I have the Iphone and the new playlist is there but all the tracks are in a different order, not an i want and colleagues that the iPad is also different once again (it's different for Mac and iPhone) so now I have a playlist with three totally different playing order... why this happens, and what is the solution please...?

  THX

  John

  Am I the only one having this problem?

  THX

  John