Pacilion g119dx 17: 17-g119dx Pavilion chassis disassemble problem

Similar Questions

• Pavilion dv2500 loading problems.

  I have a HP Pavilion dv2500 Notebook PC and I just bought a new battery about two weeks ago. My laptop is less than two years and it took me about six months to get a new battery for my laptop. In this period, I use my laptop on my power adapter only with no problem. Now that I have a new battery, I noticed that my laptop has problems of load. It will charge the battery but only if the ca is in a certain position and nothing 'bumps' in there. Six months ago, I took my laptop to my college to check the life expectancy of the AC and my college said it was perfectly fine. I did yet another health check, but I wonder what could cause this problem. The battery again, and this problem just started after I started using a battery on my laptop. I think that my AC is about a year, too.

  If I take the battery and the only laptop running on the AC, it won't work unless there again, it is in a certain position. And again, this battery is brand new and before she would charge perfectly fine. My power adapter could be dying or will I have another hardware problem? Because it's the only problem I've had.

  http://h10032.www1.HP.com/CTG/manual/c01295820.PDF

  If you have not tried with a different AC adapter, I'll try to see if I could borrow one and try that first.  If it still does the same thing, then I would say it is the seizure of power on the Board of Directors.  I don't know your whole model number but the link is for the service and maintenance manual for a 2500.  It will show the procedure to disassemble and fixing it.  Being to shake autour decision-making, I would say that it's a bad shot.  The link I posted in the previous post is for the usb card.  I just showed you that if you can see how the decision-making was there.  It just buy the plug with cable, and not to the usb Board.

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• HP Pavilion g7 - 1117cl: problem with starting up laptop

  My laptop simply no longer lights. I have a laptop HP Pavilion g7 - 1117cl... It was to have a cooling fan problem so I disassembled the laptop and he has succeeded, then reassembled and tried to turn on, but nothing... I disassembled again to see if there was anything, I done wrong and maybe found nothing so I put it back together and still nothing was. There is no battery connected, only the charger is plugged. Any suggestions?

  Hi there @DaMan23,

  Before you replaced the fan, did you get to try a BIOS reset? If this isn't the case, please put back the old fan in Notepad and try to do a reset of the BIOS with the old fan in.

  You receive errors with the old fan? What led to replace you the fan? The reason I ask is because of way General, the laptop must have some sort of indication that it starts. Even if the fan is malfunctioning. The fact that yours won't start not even for 1 second leads me to believe that the issue is not the fan.

  I looked the part number that you provided me. The fan you bought does not appear to be a part of certified HP. That said, there may be complications resulting from a scenario like that. I can't guarantee the functionality of the parts of a Web site not HP.

  Here's your Guide to Service and Maintenance. You will find the part number for the fan you need 639460-001. This includes the thermal replacement hardware.

  You can use the HP part Surfer to order a new fan that will be compatible with your laptop.

  If any step in this post helps you solve the problem, please click accept as Solution so that others can find the steps that help.

  Thank you!

• HP Pavilion dv6837el monitor problem

  Hi all...

  I have a HP Pavilion dv6837el with nvidia geforce m8400gs, and since yesterday, I have some problems of monitor.

  When I start the laptop I see not the views of the bios loading, the monitor starts to run when windows is in place, too, the resolution does not work, is no more mine default option resolution, so I can see a huge black stripe to the right if I set 1024 x 860 and I see all the office if I try to lift it up.

  In addition, there is a strip from the top of the screen that recurs in the toolbar of windows launch.

  I tried to reinstall the nvidia driver, but nothing has changed.

  That is right.  Share of repair/replacement of the motherboard, there is no solution.

  There are a few without cool do it yourself videos from YouTube to try to repair the GPU problem.

  If you are not experienced with completely disassemble a laptop, which is not easy, so I do not recommend.

• HP Pavilion g7-2292sd: problems with ethernet drivers.

  I have a HP G7-2292SD and installed windows 7 64-bit version.

  Everything looks very good and works.

  The only thing that doesn't work is the ethernet drivers.

  When I go to Device Manager and then go to the tab "other devices" is the following.

  ! - Network controller

  ! - PCI device

  ! - PCI simple communication controller

  ! - SM bus controller

  !-(USB) universal serial bus controller

  ! - unkwon device.

  As you can see, they are all marked with!

  I searched drivers but can only find drivers for windows 8 or 8.1 when I look under HP Pavilion g7-2292sd.

  Hope that some 1 can help me!

  Hello:

  You can use the W7 64-bit drivers and software on your model.  Do not use any BIOS or the files of the firmware of this model on your.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311

  SM bus controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103010-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  Graphics card (no doubt you need that too):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109913-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102497-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  Simple PCI communications controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102566-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  (USB) universal serial bus controller:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  unknown device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang =

  I don't know what model your laptop wireless (network controller) card use, so please do the following and I will post the link to the wireless card driver you need:

  Since there is no driver installed wireless, we need a labeled device network controller in Device Manager in the category other devices.  The network controller device will be a little! mark next to him.

  Thus, to find the network controller device, click on that and then click on the Details tab.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  On this list and select the second element (Hardware ID).

  After the first string of characters you see in the window.

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.

• HP Pavilion g7-2240us: problem with WiFi

  Hello.

  I had a few problems with the WiFi lately.

  Whenever I turn on the laptop, the internet conection is limited. I have to run the troubleshooting of Windows everytime I turn on my laptop to solve this problem.

  I've updated the Wifi drivers through Windows Update, but the problem persists.

  What can I do to fix this?

  Laptop model: HP Pavilion g7-2240us

  Windows 8

  There are many things that can go wrong with wifi.

  Here is a good place to start your troubleshooting.

  If the problem seems to occur when returning from Standby Mode, then you can move on to configuring power wifi Options.

  Most wireless devices can be disabled by the system for saving energy. In some scenarios of sleep, the unit is unable to wake up properly when the system comes back from sleep or hibernation. To avoid this, set the parameters of the wireless adapter power management

• Pavilion 15 L3S53EA: Problem with my audio

  I have a HP laptop with beats speakers.

  I also discovered that I have the Beats Audio software on my laptop.

  I use Realtek High Definition Audio driver, but when I installed it first time sound was fine and clear.

  Later, it became a kind of "distorted", and I think it's because of Beats Audio software.

  I have read many solutions, but they do not work for me.

  The sound is terrible, and it drives me crazy, so please help!

  I have a Pavilion L3S53EA 15.

  M4rin

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about your recent audio quality in Win10 problems and wanted to help.
  
  Whenever someone comes here running Win10 and complains about something just suddenly does not work, I immediately suspect driver updates Windows.
  
  Unfortunately, Win10 forces automatically updates driver on each of us, without our knowledge and without our permission - and in this case, a work PC is suddenly 'broken '.  This could happen to you.
  
  You must go to the settings, update & Security-> Windows Update.
  
  Then, choose Advanced-> history to see when the updates have been applied last.  If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem.  Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.
  
  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/15989-device-driver-automatic-installation-turn-off-windows-10-a.html
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Pavilion dv7 Audio problem

  Hello, im having some problems with my HP Pavilion dv7 notebook. The operating system installed on my laptop is Windows 7 Home Premium.
  
  What caused it...
  
  After that I installed a visual theme yesterday, it has messed up my explorer.exe, which means that it wouldent show my office and all... So in order to correct that I had to start my computer in safe mode with commandprompt and enter in "sfc.exe/scannow" and after this has been done, it fixed the problem and the explorer.exe worked again. But when I run that command...
  
  My problem:
  
  Then the sound outside the laptop icon is red, BUT the sound works on the computer.
  
  Does anyone know how to fix this?

  All Sound Drivers are up-to-date

  Screenshot: http://gyazo.com/acd879c95ee47b6cb29d2097b0d94eab

  I SOLVED MY PROBLEM, WHAT I DID TO REINSTALL THE AUDIO DRIVER, AND CELA WORKED.

• Pavilion: Pavilion x 360 problems of keyboard and screen

  I'm the unhappy owner of a x 360 Pavilion, prod. lol M9G20EA #UUW.

  Big questions:

  1. About half of the time the screen is upside down when I opened the PC. Sometimes closing and by reopening bypasses the screen. Sometimes a reboot is required.
  2. The hardware keyboard and the touchpad randomly is disabled. A full restart is necessary for reactivation.

  The machine is working. The service company argues that were without material errors, and restored the operating system to windows 8 - who has not solved the problems.

  I see in this forum a lot has similar problems with this model. I've tried every suggestion I could find here. Onfortunately it did not help.

  Just for the follow-up of this: HP transferred my "case" in Danish support, who contacted me by phone and loved very much for help me.
  I send a few drivers for display, chipset and touchpad, with instructions to install them in a specific order.
  Unfortunately, it has not solved the problem.
  I was then absent for various during some time and when I went back to using the machine again, there was an update of display driver of app HP Support Assistant unfortunately the autoinstall has failed, but I managed to find the same product on the HP website driver download and install manually from there. I also found a newer version of the chipset driver, which I also installed.
  Installation of the required drivers, a lot of tinkering, including the assistance of a third party (provided by HP) to completely remove the old display driver, several restarts in safe mode, etc.
  At the time of writing these I have had no problems on keyboard for a while - hoping he disappeared completely. The problem with the screen being upside is still there, but to a much lesser degree. In addition, the orientation sensor seems more sensitive, while just shaking the screen backwards a little wil if he turns in the correct position.
  If this will continue to be the situation, I can live with that.
  But still: (almost) all that work to make a product works as advertised should not be necessary. It should work out of the box or at least with a quick access, automated driver update.
  When I saw a great add to the airport the other day, promising that HP will "continue to reinvent", I couldn't help wishing that they would take a break, in order to ensure that they have already invented is currently working as expected ;-)

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• Pavilion 15-e092ea: problem setting password reset USB

  I recently received a note of advice on tune on creating a password reset disk.

  This advice works perfectly on my desktop HPE-480uk running Windows 7, but doesn't seem to work on my computer laptop 15-e092ea Pavilion that has just been improved Windows 8.1 for Windows 10.

  Creating a password reset disk function is not in user accounts. It is not necessary with Windows 10 or are different instructions?

  EKGHelP

  The only way that it "protects" you (in terms of MS...) is that, if your forget the password, you can log into your account of MS from another PC and reset  Who is right for which you do not have a password reset disk.

  I left using this method of connection because I didn't like my email address is displayed on the login screen for all to see.  It's OK on my desk at home, but it was NOT OK on my laptop when I traveled with it.  So, I switched to using a local account.

  You said you can't change it, but read these instructions carefully to see if something helps you: Account Local - Switch to 10 Windows - Windows 10 Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP Pavilion dv6 3110ez: problem with video drivers

  Best regards to all,
  Can someone post a links to drivers for these graphics cards with switchable?
  I tried different drivers, and it does not work on Windows 8 Pro x 64
  and Windows 8.1 Pro x 64.

  The laptop is HP Pavilion Dv6 3110ez.

  Manufacturer: Hewlett-Packard
  Model: HP Pavilion dv6 Notebook PC
  BIOS: Default system BIOS

  Processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  Memory: RAM 6144MB

  **********************************************************
  It's the code of the ATI Mobility Radeon HD 5000 Series:
  ------------------------------------------------------
  Hardware ID:
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C & REV_00
  PCI\VEN_1002 & DEV_68E0 & SUBSYS_144A103C
  PCI\VEN_1002 & DEV_68E0 & CC_030000
  PCI\VEN_1002 & DEV_68E0 & CC_0300

  Compatible IDs:
  PCI\VEN_1002 & DEV_68E0 & REV_00
  PCI\VEN_1002 & DEV_68E0
  PCI\VEN_1002 & CC_030000
  PCI\VEN_1002 & CC_0300
  PCI\VEN_1002
  PCI\CC_030000
  PCI\CC_0300
  **********************************************************
  **********************************************************
  It's the code of the integrated graphics card (Intel):
  --------------------------------------------------
  Hardware ID:
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C & REV_02
  PCI\VEN_8086 & DEV_0046 & SUBSYS_144A103C
  PCI\VEN_8086 & DEV_0046 & CC_030000
  PCI\VEN_8086 & DEV_0046 & CC_0300

  Compatible IDs:
  PCI\VEN_8086 & DEV_0046 & REV_02
  PCI\VEN_8086 & DEV_0046
  PCI VEN_8086 & CC_030000
  PCI\VEN_8086 & CC_0300
  PCI\VEN_8086
  PCI\CC_030000
  PCI\CC_0300

  **********************************************************
  **********************************************************

  I solved this problem with the drivers of AMD.  As there'are the drivers of this model of graphics card just for Windows 7 and not later versions of Windows, I just installed this driver in compatibility mode. All drivers for Windows 7 can be downloaded by following this link. Concerning

• Pavilion 500-054: hp pavilion 500-054 problems with the connection to monitor

  I have a 500-054 pavilion and I for a few years now.  Last year he stop to connect to my monitor (HP).  I check inside the tower and believe me there is no graphics in this card.  I see not where are the vga and dvi ports, but I don't have the graphics card.  Why it just stop working all of a sudden?  Is there anyway to fix this without buying a graphics card?  Or if I should buy a that one should I get?

  Thank you

  According to this PAGE SPEC, the PC has integrated graphics, which means that the graphics are part of the motherboard.  If either VGA or DVI ports do not connect on the screen, then maybe the integrated graphics card failed.  I see that the motherboard has a PCIxe slot, so it could be solved with an inexpensive graphics card.  Assuming that the integrated graphics card expectations it, then a discreet card for less than $50 should be easily enough.  HERE IS a PAGEfor this motherboard compatible graphics cards.  Pich an out of AMD or NVidia