Detailed information on all CPU IN Linux x86_64

Hi all

How to get detailed information on all the CPUS in Linux x86_64. As number of CPUs, use, inactive

To get the machine CPU config:

$ cat /proc/cpuinfo

and to get all the statistics of CPU

$ mpstat -P ALL

Tags: Database

Similar Questions

RIDC API: Which service to call to get information about all content in a file at end of BPM-piece attached?

In my application, it is possible for users to upload documents to WebCenter Content server. Later, when a BPM process is started, I need to attach these documents to this process. Based on this article, I need the following information on each document:
- Do you have
- dRevisionID
- dFormat
- dDocType
- dSecurityGroup
- DocUrl
I tried a few services such as 'COLLECTION_GET_CONTENTS' and 'COLLECTION_DISPLAY', but they could not give me all of the above information. My goal is to get all the documents in a folder and all of the above information in 1 single service call. I try to avoid using "COLLECTION_GET_CONTENTS" just to get a list of the documents and then call "DOC_INFO" on each document in the list to get detailed information, as it seems to cost too much service calls.
I also tried using "GET_SEARCH_RESULTS" but I could not understand the correct "QueryText" to search for all documents in a folder.
I would be very grateful if you could show me if there is a service that can return detailed information about all the documents in a folder.
Best regards
James Tran

Hi James,

With the help of this COLLECTION_GET_CONTENTS - RIDC you can get your required document information.

Try this code example: -.

dataBinder.putLocal ("IdcService", "COLLECTION_GET_CONTENTS");

dataBinder.putLocal ("hasCollectionID", "true");

dataBinder.putLocal ("dCollectionID", "235418074907008521");

Where 235418074907008521 replace with your record Collection ID

Send the request to the content server

ServiceResponse response = idcClient.sendRequest (userContext, dataBinder);

Download the workbook of data for the response of the content server

DataBinder responseData = response.getResponseAsBinder ();

The list of results = responseData.getResultSet("CONTENTS").getRows ();

for (DataObject result: results) {}

System.out.println ("\t Document ID =" + result.get ("dID"));

System.out.println ("\t revision ID =" + result.get ("dRevisionID"));

System.out.println ("\t Document Format =" + result.get ("dFormat"));

System.out.println ("\t Document Type =" + result.get ("dDocType"));

System.out.println ("\t Security Group =" + result.get ("dSecurityGroup"));

System.out.println ("\t Docu URL =" + result.get ("dWebURL"));

}

-Prashant

All detailed information about Viewer?

All detailed information about Viewer to Muse? on the adobe Web site. What happened to the manuals!

Hello

You will find video tutorials for various features in Muse on http://tv.adobe.com

You can also check http://www.adobekb.com/ for more tutorials.

- http://tv.adobe.com/watch/muse-feature-tour/muse-create-a-lightbox/

- http://tv.adobe.com/watch/learn-muse/adobe-muse-creating-a-lightbox-slideshow/

Kind regards

Abhishek Maurya

FaceTime will not open on my Macbook pro (el capitan). Message: "FaceTime close unexpectedly. Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

FaceTime will not open on my Macbook pro (el capitan). Message: "FaceTime close unexpectedly. Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

Please launch the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Step 1

For this step, the title of the Console window should be all Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ all Messages

in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu at the top of the screen bar.

In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

Please don't dump blindly thousands of lines in the journal in this discussion.

Please do not post screenshots of log messages - text poster.

Some private information, such as your name, may appear in the log. Anonymize before posting.

Step 2

In the Console window, clear the search box, and then select

DIAGNOSIS AND diagnostic USE information reports ▹ user

(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

Please do not post other types of diagnostic report - they are very long and rarely useful.

When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

ORA-01034: ORACLE not available ORA-27101: Kingdom is no Linux-x86_64 shared memory error: 2: no such file or directory process ID: ID of Session 0: 0 serial number: 0

Hello
In our society, we have oracle server on Suse Linux with two instances TETA and TETA201.
One day on a server broke down, because there is no free space due growing files 'archivelog.
After that I manually deleted several older archivelog files, but after the reboot, the server error occurs when connecting to the database:
"ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux x86_64 error: 2: no such file or directory
Process ID: 0
"Session ID: serial number 0: 0"
$ ORACLE_SID is set to TETA, if export it to TETA201 connection works correctly
Oracle service startup there is no errors but only one instance is running TETA201 works correctly

#############################################################################

# Beginning of start O R A C L E section #.

#############################################################################

PARAMETERS from/etc/sysconfig/oracle

-Set the Oracle kernel settings: Yes

-Start the Oracle Listener: Yes

-Start the Oracle database: Yes

-Start the Oracle Web server: no

-Start Oracle EManager: Yes

-Start Oracle iSQLPLUS Manager: Yes

-Start Oracle Agent: no

-Start Oracle Internet Filesystem: no

-Run Oracle Directory Manager: no

Can not find required file: isqlplusctl - START_ORACLE_DB_ISQLPLUS setting = no

Undefinied Agent Oracle or not properly configured. Please check.

Setting the parameters of the kernel for Oracle, see the file

/ etc/sysconfig/Oracle of explanations.

Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

Semaphore values: SEMMSL = 1250 SEMMNS = 32000 SEMOPM = 100 SEMMNI = 256

Other values: FILE_MAX_KERNEL = 131072 IP_LOCAL_PORT_RANGE = 1024 65000

RMEM_DEFAULT = 4194304 WMEM_DEFAULT = 262144 = 4194304 = 262144 WMEM_MAX RMEM_MAX

Huge pages:

ULIMIT values: MAX_CORE_FILE_SIZE_SHELL = unlimited

FILE_MAX_SHELL = 65536 = 16384 PROCESSES_MAX_SHELL

Kernel defined for Oracle parameters: fact

-Start listener... done

+ From databases...

Start entry for SID TETATEST to /oracle/product/11.2.0/dbhome_1/ inskippedratab

Database instance "TETA" of treatment: save the /oracle/product/11.2.0/dbhome_2/startup.log file

Instance of database 'TETA201' of treatment: save the /oracle/product/11.2.0/dbhome_1/startup.log file

Status of Oracle database start: fact

-Starting Apache... unused

-From unused application server

-From Application Server Console... unused

-Start of Agent... unused

-From Enterprise Manager...

DB console departure for TETA starting DB Console for TETA201 done

-Jumped from iSQLPLUS Manager...

-From... unused Oracle Internet file system

-From Oracle Internet Directory... unused

#############################################################################

# End of O R A C L E section #.

#############################################################################

#############################################################################

# End of O R A C L E section #.

#############################################################################

/Oracle/product/11.2.0/dbhome_1/startup.log

SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43 2016

Copyright (c) 1982, 2011, Oracle. All rights reserved.

SQL > Polaczono.

SQL > ORACLE Instancja zostala zamknieta.

SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43:01 2016

Copyright (c) 1982, 2011, Oracle. All rights reserved.

SQL > connect to an idle instance.

SQL > ORACLE instance started.

Total System Global Area 1043886080 bytes

Bytes of size 2234960 fixed

603981232 variable size bytes

432013312 of database buffers bytes

Redo buffers 5656576 bytes

Baza danych zostala zamontowana.

Baza danych zostala otwarta.

SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

/Oracle/product/11.2.0/dbhome_2/bin/DBSTART: warm welcome of the instance 'TETA201' database has started.

/Oracle/product/11.2.0/dbhome_2/startup.log

PON sty 18 11:42:52 THIS 2016

SQL * more: Production of the version 11.2.0.4.0 on Mon Jan 18 11:42:52 2016

Copyright (c) 1982, 2013, Oracle. All rights reserved.

SQL > connect to an idle instance.

SQL > ORACLE instance started.

Total System Global Area 4175568896 bytes

Bytes of size 2259840 fixed

1409287296 variable size bytes

2751463424 of database buffers bytes

Redo buffers 12558336 bytes

Baza danych zostala zamontowana.

ORA-03113: end of file on communication channel

Māju ID: 10080

Sesji ID: 33, serial number: 3

SQL > Odlaczono od Oracle Database 11g Release 11.2.0.4.0 - 64 bit Production

/Oracle/product/11.2.0/dbhome_2/bin/DBSTART: hot "TETA" database instance started.

Linux: ~ # service oracle State

#############################################################################

# Begin State O R A C L E section #.

#############################################################################

Kernel parameters

Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

Semaphore values: SEMMSL, SEMMNI, SEMMNS, SEMOPM: 1250 32000 100 256

Database Instances

TETA instance is out of service (autostart: Y)

Instance of TETATEST is broken (autostart: N)

TETA201 of the instance is declining (autostart: Y)

AMT-listener: to the top

Webserver (Apache httpd): low (0 process)

List of processes by user oracle:

PID TTY STAT TIME COMMAND

9855?        SSL 0:00 /oracle/product/11.2.0/dbhome_2/bin/tnslsnr LISTENER

10128?        SS 0:00 ora_pmon_TETA201

10130?        SS 0:00 ora_psp0_TETA201

10132?        SS 0:00 ora_vktm_TETA201

10136?        SS 0:00 ora_gen0_TETA201

10138?        SS 0:00 ora_diag_TETA201

10140?        SS 0:00 ora_dbrm_TETA201

10142?        SS 0:00 ora_dia0_TETA201

10144?        SS 0:00 ora_mman_TETA201

10146?        SS 0:00 ora_dbw0_TETA201

10148?        SS 0:00 ora_lgwr_TETA201

10150?        SS 0:00 ora_ckpt_TETA201

10152?        SS 0:00 ora_smon_TETA201

10154?        SS 0:00 ora_reco_TETA201

10156?        SS 0:00 ora_mmon_TETA201

10158?        SS 0:00 ora_mmnl_TETA201

10166?        SS 0:00 ora_qmnc_TETA201

10338?        SS 0:00 ora_cjq0_TETA201

11195?        SS 0:00 ora_q000_TETA201

11197?        SS 0:00 ora_q001_TETA201

#############################################################################

# End of O R A C L E section #.

#############################################################################

Help, please

RMAN target /.

RMAN > startup mount;

RMAN > overlap archivelog all;

RMAN > delete archivelog expired;

RMAN > alter database open;

Oracle 12 c multimedia database Linux x86_64... What's for AMD x86_64?

Hello
All download and install 12 c for linux x86_64 on ' machine processor intel ' oracle database? as I can see the names of files downloadable media shows that it is only for machines with AMD processor... See the snapshot below:
linuxamd64_12c_database_1of2.zip
http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/database12c-Linux-download-1959253.html
Thank you.
Ahmad

MuhammadAhmad wrote:

Hello

All download and install 12 c for linux x86_64 on ' machine processor intel ' oracle database? as I can see the names of files downloadable media shows that it is only for machines with AMD processor... See the snapshot below:

linuxamd64_12c_database_1of2.zip

http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/database12c-Linux-download-1959253.html

Thank you.

Ahmad

I think you are trying to read too much into that name. Out of curiosity I googled "amd64". I suggest you do the same. It seems that AMD was the first to come out with a game on the x 86 architecture to 64-bit instructions. Intel had to scramble to follow. I suspect that the use of AMD64 has started to become a generic name for x 86-64. If you check the hardware requirements in the Installation Guide, you will see that it does not itself with Intel vs AMD. At this level, he cares only about 32-bit and 64 - bit.

Errors - ORA-01034, ORA-27101 & Linux-x86_64 error: 2: no such file or dir
I installed Oracle database 10g and have 10 g on linux SUSE 10 EE (SP2)

When I try to log in as system using sqlplus locally on the server, it works fine. However, when I try the following, I get the error messages:

SQL > conn system/system@botsdb

ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory

I tried the same on my laptop through sqlplus and the error message is the same.

I checked if the database has increased, and to do this, I've run follwing commands whicle always be logged in as a system/system:

SQL > Select * from v database $;

SQL > Select * from v$ instance;

SQL > Select * from tab;

These bring no results. Also, if I try to restart the database, it gives the message that the database is already in place. I restarted many times db, checked if my interlocutor was listening on the BOTSDB service and these all seem fine.

It is very curious that when @BOTSDB is set when the connection, the connection fails.

Can someone please guide me to sort this error?

Thank you and best regards,
Aparna
Perhaps your problem is the ending backslashes in the ORACLE_HOME lines in listener.ora.

Suggest you try to remove the trailing / characters and restart the listener.

Why Linux with Mozilla/5.0 (X 11; Linux x86_64; RV:31.0) Gecko/20100101 Thunderbird/31.3.0 Google Calendar dosen't have the same graphics as in WIN?

The application databases
Name Thunderbird
Version 31.3.0
User Agent Mozilla/5.0 (X 11; Linux x86_64; RV:31.0) Gecko/20100101 Thunderbird/31.3.0
Profile directory
Open Directory
(Local disk)
Application version identifier 20141128200244
Permit Plugins about: plugins
Build configuration about: buildconfig
Memory usage on: memory

Incident reports
ID of the report
Extensions
Name enabled Version ID
Google Calendar tab 3.9 true googlecalendartab@momo
ImportExportTools 3.1 real {3ed8cc52-86fc-4613-9026-c1ef969da4c3}
Lightning 3.3.2 real {e2fda1a4-762b-4020-b5ad-a41df1933103}
E-mail [email protected] true Menu and Launcher unit integration 1.3.1
Provider for Google Calendar 1.0.3 {a62ef8ec-5fdc-40c2-873c-223b8a6925cc} real
Important change preferences
Value name
Browser.cache.Disk.Capacity 358400
Browser.cache.Disk.smart_size_cached_value 358400
Fake Browser.cache.Disk.smart_size.first_run
Fake Browser.cache.Disk.smart_size.use_old_max
Browser.Display.foreground_color #000066
extensions.lastAppVersion 31.3.0
mailnews. Database.global.datastore.ID 5A 192271-d148-44be-a4a0-c336bb1306f
mail.openMessageBehavior.version 1
network.cookie.cookieBehavior 3
network.cookie.lifetimePolicy 2
true network.cookie.prefsMigrated
places.database.lastMaintenance 1416850890
places. History.expiration.transient_current_max_pages 104858
true plugin.importedState
Fake print.print_bgcolor
Fake print.print_bgimages
Default print.print_colorspace
Fake print.print_downloadfonts
True print.print_evenpages
True print.print_in_color
Print.print_margin_bottom 0.5
Print.print_margin_left 0.5
Print.print_margin_right 0.5
Print.print_margin_top 0.5
True print.print_oddpages
Print.print_orientation 0
Print.print_page_delay 50
Print.print_paper_data 0
Print.print_paper_height 297.00
Print.print_paper_name iso_a4
Print.print_paper_size_type 1
Print.print_paper_size_unit 1
Print.print_paper_width 210.00
Default print.print_plex_name
Default print.print_resolution_name
Print.print_scaling 1.00
True print.print_shrink_to_fit
Fake print.print_to_file
Print.print_unwriteable_margin_bottom 56
Print.print_unwriteable_margin_left 25
Print.print_unwriteable_margin_right 25
Print.print_unwriteable_margin_top 25
Graphics
Description of the NVIDIA Corporation - Quadro 600/PCIe/SSE2 map
Vendor ID NVIDIA Corporation
Device ID Quadro 600/PCIe/SSE2
NVIDIA Driver Version 4.4.0 331.113
Fake of WebGL Renderer
GPU accelerated Windows 0
AzureCanvasBackend Cairo
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend none
AzureContentBackend Cairo
JavaScript
Incremental GC 1
Accessibility
0 Active
Prevent accessibility 0
Versions of the library
Minimum version expected Version in use
NSPR 4.10.6 4.10.6
NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
Util NSS 3.16.2.3 3.16.2.3
NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECC

Well more than one GTK or Gnome Linux application compared to say of KDE.

WerFault.exe continues to use all CPU, despite Microsoft Error Reporting turned off.

Although even I turned off the Microsoft error (running Vista Home Premium) report continues to use all CPU, I read a lot of geek and tech stuff after googling the problem and thought that I had found the answer. I uninstalled a few programs that I did not, and he was glad that the problem has disappeared. After one episode a week, he started to reproduce. It could be something else to do, but I can't locate the forum who suggested to uninstall programs. Even when I open Explorer and Windows Task Manager just. WerFault.exe executes two threads. All the answers? I hope of course! Thank you

When WerFault.exe turns that means that other tools have crashed. Reactivate the WER service and check the item 'Problem and Solution' applications that crashed the last days.
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

We look for details user for all users directly from Active Directory in a webcenter portal application?

We look for details user for all users directly from Active Directory in a webcenter portal application?

Hi again.

Is not just WebCetnerDS in WebLogic... If it's a CustomPortal you had created a CustomPortalDS.

You need to do a DB connection in your y JDeveloper Portal App than a link to the WebCenterDS schema.

Deployment and testing of your WebCenter Portal: Application Framework - 11g Release 1 (11.1.1.7.0)

Follow the links provided by Vinay on the WLST.

Kind regards.

How can I go online to check/change your billing information. are all I'm offered product information

How can I go online to check/change your billing information. are all I'm offered product information

Hello

Please refer to this article: https://helpx.adobe.com/creative-cloud/kb/change-account-payment.html

Let us know if this helps!

Need information about the CPU patches
Hello

Could someone please explain me what CPU patches are. This is a security patch?
Is it mandatory to apply these patches every quarter. And if we apply, will there be a performance related issues?

Thank you!
The quarterly patch all CPU Oracle application is optional. If your test needs are too high to apply multiple patches per year impractical, then you might just apply each other or even games patch by year. CPU patches are cumulative, so if you apply the most recent you all previous patches.

The above offers you don't need a specific patch provided by one of your patch. You last version Oracle and when you plan to upgrade can also be a deciding factor if needed/wanted to apply a specific processor.

HTH - Mark D Powell.

HP Pavilion dv6-3035ec: detailed information material

Hello
I would ask, where can I find information on my laptop.
I'm looking for the detail data, for example:
Number/type - type of motherboard - cpu socket, County of dimm slots, slot of chart, connectors for hard drives
-information for cpu, DIMM, graphics card, hard drives

I want to do the hardware upgrade now, but I don't know any information.

SN: [personal information]

Thank you very much.

Mac.

All the manuals and owner's manuals here.

http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=4232901

REO

Camileo Pro: Detailed information

Hello
I want to know some details about this product (Toshiba Camileo Pro) that do not appear in the manual.

Which is the resolution of the LCD (2.5 inches)?

What is the length of the film, which will be installed in the Secure Digital 1 GB card?

What is ocupied cantity by the photo from 1 to 7 PM? But 11 MP? All ISO settings?

What is the battery life? Any support for SDHC cards in the future?

You are my last chance to get some information about this product. Please help me!
Thank you and excuse my English.

I do not have the small cam, but I try to provide you with some information.

Duration of the movie will be about 45 minutes on the SD card of 1 GB.

Duration of the battery, I hope that it has been designed with life is about 180 minutes.

Don't know if there will be any SDHC support in the near future. And I thought that there only 7MP and so I read it 350 photos will take place on the 1 GB card.

That of all what I could find right now, hope this helps a little.

Svchost constantly using all cpu that is 100%

computer running constantly slow due a svchost constantly of vives that uses all the CPU resources available to be able to read a question on this forum, in which you explained to another, how to get the data needed to send it to you if you can help to diagnose the problem, here is the data that I collected with your information It's like this. can send it please reply to (Email address removed) if possible thank you for your time

PID number is 1176

Image name PID Services

========================= ======== ============================================

System Idle Process 0 n/a

System 4 n/a

N/A smss.exe 468

N/A csrss.exe 580

Wininit.exe 624 n/d

N/A csrss.exe 632

N/A services.exe 668

Lsass.exe 684 KeyIso, ProtectedStorage, SamSs

LSM.exe 692 n/d

N/A Winlogon.exe 740

Svchost.exe 904 DcomLaunch, PlugPlay

Svchost.exe 964 RpcSs

Svchost.exe 1068 Audiosrv, Dhcp, Eventlog, lmhosts, wscsvc

Svchost.exe 1164 AudioEndpointBuilder, dot3svc EMDMgmt;

Hidserv, Netman, PcaSvc, SysMain, TrkWks,

UxSms, wudfsvc WdiSystemHost, WPDBusEnum,

Svchost.exe 1176 AeLookupSvc Appinfo, BITS, browser,

CertPropSvc, EapHost, hkmsvc, IKEEXT,

iphlpsvc, LanmanServer, MMCSS, MSiSCSI;

ProfSvc, RasMan, schedule seclogon, FEEL,.

ShellHWDetection, themes, Winmgmt, wuauserv

audiodg.exe 1300 n/d

gpsvc svchost.exe 1328

SLsvc.exe 1348 slsvc

Svchost.exe 1376 EventSystem, fdPHost, FDResPub.

LanmanWorkstation, netprofm, nsi, QWAVE,

SCardSvr, SstpSvc, W32Time, wcncsvc,

WebClient

LBTServ.exe 1472 LBTServ

1556 CryptSvc, Dnscache, KtmRm napagent, Svchost.exe

NlaSvc, TapiSrv, Wecsvc

Spoolsv.exe spooler 1884

1924 BFE MpsSvc, DPS, Svchost.exe

agrsmsvc.exe 388 AgereModemAudio

ALG.exe 392 ALG

AppleMobileDeviceService. 476 Apple Mobile Device

aDefragService.exe 520 AshampooDefragService

mDNSResponder.exe 492 Hello Service

CDAC11BA. EXE C 564-DillaCdaC11BA

Dllhost.exe 660 COMSysApp

DfSdkS DfSdkS.exe 1044

PresentationFontCache.exe 1568 FontCache3.0.0.0

fsssvc fsssvc.exe 2312

GoogleUpdaterService.exe 2324 gusvc

IJPLMSVC.exe 2476 IJPLMSVC

iWinTrusted iWinTrusted.exe 2496

McSACore.exe 2524 McAfee SiteAdvisor Service

mcods.exe 2544 McODS

Rundll32.exe 2556 N/A

McProxy McProxy.exe 2568

McShield McShield.exe 2608

MpfSrv.exe 2676 MpfService

MSDTC.exe 2932 MSDTC

Svchost.exe 3272 PolicyAgent

DWM.exe 3336 n/d

Explorer.exe 3360 n/d

N/A defragMonitorService.exe 3456

N/A defragActivityMonitor.exe 3576

BJMYPRT. S/O EXE 3592

N/A mcagent.exe 3600

ACDaemon.exe 3640 s/o

N/A defragTaskBar.exe 3760

N/A fsui.exe 3860

ProtexisLicensing-PSIService.exe 3936

DAP.exe 4084 n/a

Svchost.exe 1132 SDRSVC

Msnmsgr.exe 2184 N/A

taskeng.exe 2288 n/d

GoogleToolbarNotifier.exe 772 n/a

btdna.exe 2300 n/d

SeaPort SeaPort.exe 3180

snmptrap.exe 3124 SNMPTRAP

svchost.exe 3404 stisvc

UI0Detect ui0detect.exe 3492

VDS VDS.exe 3660

VideoAcceleratorService.e 3308 VideoAcceleratorService

S/o VideoAcceleratorEngine.ex 3676

VSSVC.exe 1116 VSS

Svchost.exe 3428 WcsPlugInService

WmiApSrv WmiApSrv.exe 3688

SearchIndexer.exe 4024 WSearch

WUDFHost.exe 4112 n/a

MgApp.exe 4120 n/a

WmiPrvSE.exe 4344 n/a

mcmscsvc mcmscsvc.exe 4384

taskeng.exe 5356 N/A

mcsysmon.exe 5400 McSysmon

ImApp.exe 5816 n/a

Unsecapp.exe 5896 N/A

6088 N/A wlcomm.exe

McNASvc McNASvc.exe 5104

IncMail.exe 4640 s/o

IEUser.exe 1588 N/A

Iexplore.exe 6116 n/d

2168 N/A cmd.exe

taskeng.exe 4620 n/d

616 N/A Tasklist.exe

WmiPrvSE.exe 2484 n/a

The ability to install all versions of Vista is contained on the Vista DVD.

In other words, there are only 2 DVDs, 32 and 64 bit.

This is the product key that corresponds to the correct version must be activated.

If you have no luck with MS re one disc, borrow one, select your operating system version and use install your product key during.

Detailed information on all CPU IN Linux x86_64

Similar Questions

Maybe you are looking for