Details of the image when it is used on a Web site

Similar Questions

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• Since the upgrade to the latest version of firefox, I don't get the padlock when it is connected to a secure site. Is this normal?

  Since the upgrade to the latest version of firefox, I don't get the padlock when it is connected to a secure site. Is this normal?

  The lock has been replaced by the site identity button, for details on use, see https://support.mozilla.com/kb/Site+Identity+Button

  If you want to add a padlock icon in the address bar, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/

• Must I pay monthly to use free images of rights to a small business Web site?

  Must I pay monthly to use free images of rights to a small business Web site?

  Hello

  Answers is a technical support site of journal peer for Windows and a few other Microsoft
  products. Answers has absolutely nothing to do with the question of whether or not you have to pay
  anyone, even Microsoft, service fees for the use of the images or anything else. If you need
  to raise this point with some company, and the site offers images.

  Sorry, we cannot be more helpful.

  Rob - SpiritX

• I can't use the "Enter" key to take me to a Web site, I typed in the navigation bar - I have to use the mouse to click on the arrow 'go. ' Why? How can I fix it?

  I can't use the "Enter" key to take me to a Web site, I typed in the navigation bar - I have to use the mouse to click on the arrow 'go. ' Why? How can I fix it?

  An extension, probably "AVG Safe"

• When I try to access a web site, it goes into a cycle of "waiting on windows 8 or 3 pro surface and cannot empty the trash.

  I have some problems with a new surface pro 3.

  A. when I try to access a web site, it goes into a vicious circle of "waiting for...". That does not stop

  b. I can't empty the trash or delete a file downloaded my wife. I just get a "not responding".

  c. when I try to access the files on any mobile device, for example Flash Player, it is reported there is no files when I know there are many

  any suggestions?

  Dr

  I'm not sure that these are related between them, but

  A: open the options of IE, on the connection tab, click on "Network settings" and make sure that everything is disabled (off), then reboot and see if it helps.

  B: what process stops responding when you click the delete key?

  C: it may simply mean that the file permissions are not configured to allow you to access the files on a flash drive.  Do you know if there are security settings applied?

• When you try to access a Web Site

  When you try to connect to Web Sites requesting my user ID when I try to enter it can't do.  The reason in

  that my ID is Alpha numeric. When I enter the Alpha which is OK. but when I add the digital all I get is Alpha?

  This only happens when you try to access a Web Site.  Microsoft Word works very well. In fact I can type my user ID in Word and copy paste into the connection site. Which works very well.

  It makes no difference as to what I use either Internet Explorer, Firefox or Google.  Please notify.

  Hi RHubley,

  What type of computer you are using?  It would be helpful to give details such as the type of computer, operating system, product number, etc..

  Thank you

  SunshineF

• When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.

  invalid certificates

  When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.  I have connected to this site from this computer several times in the past.  I contacted toshiba technical support and they said I don't have gpedit.msc - Group Policy Editor and need to have installed to solve my problem.  can you help me?

  Hello

  1. What version of Windows is installed on the computer?
  2. What browser do you use?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/certificate-errors-frequently-asked-questions

  It will be useful.

• How can I create a widget from Adobe Acrobat DC Pro that I use in my Web site instead of using EchoSign/DC, as I am now?

  How can I create a widget from Adobe Acrobat DC Pro that I use in my Web site instead of using EchoSign/DC, as I am now?

  Hello

  As the creation of widgets is an echosign feature and not an Acrobat feature, unfortunately, you wouldn't be able to create widgets with the Acrobat DC pro subscription. This is due to the reason why you get echosign pro subscription when you subscribe to DC, Acrobat pro, which does not support the widget.

  If in the case where you are on Echosign pro subscription, you wouldn't be able to do so because it does not support the creation of widgets. You will have to opt for a global echosign or the company's plan to create widgets.

  Or you can opt for one of the Acrobat business plans to perform this task.

  If you wish, you can connect with the support of Adobe for more information in this regard.

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Please click on the blue button "Still need help" to connect with one of the frames.

  Concerning

  Sukrit diallo

• How to save a pdf page 2 (created in Illustrator) to be used in a web site?

  How to save a pdf page 2 (created in Illustrator) to be used in a web site?

  When I save my Illustrator file in pdf format, it is about 2600 k, my website admin will allow only storage of 5000 kb. I tried to 'save for web', but that only saves the first page of my document. Any suggestions other than payment for more storage?

  What predefined pdf do you use? Try to file more small size rather than default illustrator.

  

  Save for web doesn't PDF, so not a multipage control.

• I asked Firefox to remember a password when I arrived to a secure Web site. Now, I want to cancel that. Can you tell me how, please? John

  Question
  I asked Firefox to remember a password when I arrived to a secure Web site. Now, I want to cancel that. Can you tell me how, please? John

  1. On the Tools menu, select Options to open the options window
  2. Go to the Security Panel
  3. Click the "saved passwords" button to open the password manager
  4. In the list of sites, click the site you want to remove to select
  5. Click on the button Delete.

• WSUS - in a Windows 8 how know the source of updates, Windows Update or WSUS Web site

  WSUS - in a Windows 8 how know the source of updates, Windows Update or WSUS Web site.

  There is no powershell command (or other means) to learn if a Windows Client to get updates from WSUS (and details of the WSUS server) or the Windows Update Site.

  Moreover, in the history of Windows Update, knowing the source of the instalation (WSUS or Windows Update Web site).

  Thank you

  PQ ;-)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Buy Adobe Premiere Pro or creative cloud to create fillable PDF documents for use on our Web site?

  Should I buy Adobe Premiere Pro or creative cloud to create fillable PDF documents for use on our Web site?  We are a not-for-profit organization.

  Thank you

  Lance

  Adobe acrobat is the creator of the pdf file of the gold standard.

  You can either buy the last version of Plans and prices | Adobe Acrobat DC or 'rent' it via the adobe cc plans creative cloud and membership pricing | Adobe Creative Cloud