Detect devices in Windows 7

Similar Questions

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

  Original title: IPOD

  When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

  Any ideas?

  Hello

  1. were you able to use the IPod even without any problem before?
  2 have you made changes on the computer before this problem?
  3 have you tried plugging it into different USB ports and check?
  4. are you able to use other USB devices on the computer?
  5. have you try to use the IPod even on check and another computer?
  6. what operating system do you use?

  Answering these questions could help us help you better.

  Run the following article fixit tool and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

• Cannot access a HID device get code 5 error please let me know how to access a HID device, I need an example of code to access a HID device in windows 7.Thanks.R.M. Kiran

  /*******************************************************
  Simplification of Windows HID

  Alan Ott
  Software signal 11

  22/08/2009

  Copyright 2009, all rights reserved.
   
  The contents of this file can be used by anyone
  for any other reason without conditions and can be
  used as a starting point for your own applications
  that appeal to HIDAPI.
  ********************************************************/

  #include
  #include
  #include
  #include
  #include "hidapi.h".

  The headers needed to sleep.
  #ifdef _WIN32
  #include
  #else
  #include
  #endif

  int main (int argc, char * argv)
  {
  int RES;
  unsigned char buf [256];
  #define MAX_STR 255
  WSTR wchar_t [MAX_STR];
  hid_device * handle;
  int i;

  WIN32 #ifdef
  UNREFERENCED_PARAMETER (ARGC);
  UNREFERENCED_PARAMETER (argv);
  #endif

  struct hid_device_info * devs, * cur_dev;
     
  devs = hid_enumerate (0x0, 0x0);
  printf ("id=%d\tsproduct id = %d\n",devs-> vendor_id provider, devs-> product_id ");
  cur_dev = devs;
  so that {(cur_dev)
  printf ("detecte\n device type: % 04hx %04hx\n path: %s\n Serial_number: %ls", cur_dev-> vendor_id, cur_dev-> cur_dev-> path, product_id, cur_dev-> Serial_number);
  printf ("\n");
  printf ("manufacturer: %ls\n", cur_dev-> manufacturer_string ");
  printf ("product: %ls\n", cur_dev-> product_string ");
  printf ("output: %hx\n", cur_dev-> release_number ");
  printf ("Interface: %d\n", cur_dev-> interface_number);
  printf ("\n");
  cur_dev = cur_dev-> next;
  }
  hid_free_enumeration (devs);

  To implement the command buffer.
  Memset (buf, 0x00, sizeof (BUF));
  buf [0] = 0x01;
  buf [1] = 0x81;

  Open the unit by using the VID, PID,
  and possibly the serial number.
  handle = hid_open (0x4d8, 0x3f, L "12345");
  handle = hid_open (0 x 0461, 0x4d81, NULL);
  If (! handle) {}
  printf ("cannot open device\n");
  Return 1;
  }

  Read the manufacturer string
  WSTR [0] = 0x0000;
  RES = hid_get_manufacturer_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("could not read the manufacturer string\n");
  printf ("string of the manufacturer: %ls\n", wstr ");

  Read the product chain
  WSTR [0] = 0x0000;
  RES = hid_get_product_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("cannot read string\n product");
  printf ("string of product: %ls\n", wstr ");

  Read the serial number string
  WSTR [0] = 0x0000;
  RES = hid_get_serial_number_string (handle, wstr, MAX_STR);
  If (res<>
  printf ("could not read the serial number string\n");
  printf ("string of serial number: (%d) %ls', wstr [0], wstr");
  printf ("\n");

  Read the indexed string 1
  WSTR [0] = 0x0000;
  RES = hid_get_indexed_string (handle, 1, wstr, MAX_STR);
  If (res<>
  printf ("could not read the string indexed 1\n");
  printf ("indexed 1 string: %ls\n", wstr);

  Define the function hid_read() as non-blocking.
  hid_set_nonblocking (handle, 1);
     
  Try reading from the device. It is and must be without
  given here, but enforcement should not block.
  RES = hid_read (handle, buf, 17);

  Send a report on the device
  buf [0] = 0x2;
  buf [1] = 0xa0;
  buf [2] = 0x0a;
  buf [3] = 0x00;
  buf [4] = 0x00;
  RES = hid_send_feature_report (handle, buf, 17);
  If (res< 0)="">
  printf ("cannot send a feature report. \n") ;
  }

  Memset (buf, 0, sizeof (BUF));

  Read a report of the device
  buf [0] = 0x2;
  RES = hid_get_feature_report (handle, buf, sizeof (buf));
  If (res< 0)="">
  printf ("failed to get a feature report. \n") ;
  printf ("%ls", hid_error (handle));
  }
  else {}
  Print the buffer returned.
  printf ("function Report\n");
  for (i = 0; i< res;="">
  printf ("% 02hhx", buf [i]);
  printf ("\n");
  }

  Memset (buf, 0, sizeof (BUF));

  LED toggle (cmd 0x80). The first byte is the report number (0 x 1).
  buf [0] = 0x1;
  buf [1] = 0x80;
  RES = hid_write (handle, buf, 17);
  If (res< 0)="">
  printf ("could not write () \n");
  printf ("error: %ls\n", hid_error (handle));
  }

  Status request (cmd 0x81). The first byte is the report number (0 x 1).
  buf [0] = 0x1;
  buf [1] = 0x81;
  hid_write (handle, buf, 17);
  If (res<>
  printf ("impossible to write() (2) \n" ");

  Read the requested State. hid_read() has been set to be
  non-blocking by the call to hid_set_nonblocking() above.
  This loop shows the non-blocking of hid_read() nature.
  Res = 0;
  While (res == 0) {}
  RES = hid_read (handle, buf, sizeof (buf));
  If (res == 0)
  printf("waiting...\n");
  If (res<>
  printf ("could not read () \n");
  WIN32 #ifdef
  Sleep (500);
  #else
  usleep(500*1000);
  #endif
  }

  printf ("read data: \n");
  Print the buffer returned.
  for (i = 0; i< res;="">
  printf ("% 02hhx", buf [i]);
  printf ("\n");

  hid_close (handle);

  / * Free of static objects of HIDAPI. */
  hid_exit();

  WIN32 #ifdef
  System ("pause");
  #endif

  return 0;
  }

  Hi KIRAN RM,.

  Given that you need example code to access a HID device in windows 7, the question you have posted is better suited for the MSDN Forums. Please post your query in the link next to the support of the MSDN forum for further assistance.

  Windows hardware development

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• Windows Update Agent fails to detect the updates (Windows Server WSUS with SCCM)

  Howdy

  We recently integreated WSUS in SCCM 2012, which means WSUS updates are now provided through the software Center instead of through the Windows Update client. This does not work as expected.

  However, we are using Kaspersky Endpoint Security, which has a function of software vulnerability report that we want to use. This could inform us of all the machines that do not have all their updates installed. It is a simpler than using SCCM reports interface. When searching for vulnerabilities, Kaspersky Network agent uses the Windows Update Agent service to find updates in WSUS. This function does not work on our customers, where it can detect a single Windows Update. I have a transcript example from the WindowsUpdate.log file below:

  ========================================================================================
  2016-05-25 16:10:37:917 884 7ac Agent *.
  2016-05-25 16:10:37:917 884 7ac Agent * START * Agent: finding updates [CallerId = Kaspersky Network Agent] of
  2016-05-25 16:10:37:917 884 7ac Agent *.
  2016-05-25 16:10:37:917 884 7ac Agent * Include potentially this cancels the updates
  2016-05-25 16:10:37:917 884 7ac Agent * Online = Yes; Ignore download priority = No
  2016-05-25 16:10:37:917 884 7ac Agent * criteria = "IsInstalled = 0 AND IsHidden = 0 OR IsInstalled = 1".
  2016-05-25 16:10:37:917 884 7ac Agent * ServiceID = {00000000-0000-0000-0000-000000000000} third party service
  2016-05-25 16:10:37:917 884 7ac Agent * scope of search = {Machine}
  2016-05-25 16:10:37:918 3988 d5c COMAPI<-- submitted="" --="" comapi:="" search="" [clientid="Kaspersky" network="">
  2016-05-25 16:10:38:826 884 7ac PT +++ PT: Synchronizing server updates +++
  2016-05-25 16:10:38:826 884 7ac PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, server URL = http://OURSCCMSERVER:8530/ClientWebService/client.asmx
  2016-05-25 16:10:57:878 884 7ac PT +++ PT: synchronizing extended update info +++
  2016-05-25 16:10:57:878 884 7ac PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, server URL = http://OURSCCMSERVER:8530/ClientWebService/client.asmx
  2016-05-25 16:10:57:986 884 7ac Agent * updated added {80FEF50B-F349-4BDC-B781-FF8CD6D913F6}.201 in search result
  2016-05-25 16:10:57:986 884 7ac Agent * updates found 1 to 123 categories in the search. evaluated Appl. rules of 1372 out of 2495 deployed entities
  2016-05-25 16:10:57:988 884 7ac Agent *.
  2016-05-25 16:10:57:988 884 7ac Agent * END * Agent: finding updates [CallerId = Kaspersky Network Agent] of
  2016-05-25 16:10:57:988 884 7ac Agent *.
  2016-05-25 16:10:57:990 b 3988 6-0 COMAPI > COMAPI - RECOVERY -: search [ClientId = Kaspersky Network Agent]
  2016-05-25 16:10:57:991 3988 COMAPI 6 b 0 - updates found = 1
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI-
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI - END--COMAPI: search [ClientId = Kaspersky Network Agent]
  2016-05-25 16:10:57:991 b 3988 6-0 COMAPI-
  ========================================================================================

  As you can see on this update of the transcript were found only 1. This was taken from a test machine that has been built recently and had lost a large part of the updates.

  We also have in our devices infrastructure traditional WSUS running on a different server (not SCCM), which are reports in fine and properly, Kaspersky detects missing updates.

  We determined with Kaspersky that the problem lies in the Windows Update agent and not their software. Can anyone tell if the question is because we use SCCM for updates (and therefore Windows Update agent is not working properly) or that there is another issue that can be resolved?

  Russell

  It is a forum for specific consumers.

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus

• Device to Windows Mobile and Windows 7

  I could not find the Windows Mobile Device Center in Windows 7. In addition, when I plug my camera in Windows 7, it does not recognize. Vista had no problems to recognize or sync to the device.

  Anyone know where he is at the center of the device in Windows 7 and how to get Windows 7 to recognize the device?

  MitigationElf,
  Mobile Device Center will be installed automatically once you connect your mobile device.
  If your device is not compatible, you might need to wait until your device support manufacturer releases.
  Please remember that Windows 7 is still in testing, official support and adoption must be provided by the manufacturers at the time of the release. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hello Rami,

  I guess the point of my question was that Windows Mobile Device Center does NOT automatically install in Windows 7 when a compatible device is connected. The T-Mobile wing is fully compatible with Windows 7. (to push the point a bit more, Windows 7 documentation indicates that something compatible with Vista is also compatible with Windows 7, but it is a question of a different thread).

  When I plugged my wing in, not Windows 7 has not yet recognized that something had been plugged in, and still less that it is a Windows Mobile 6.1 device.

  I have, however, found a workaround. First of all, I found Windows Mobile Device center in the downloads section of the Microsoft.com site and installed it - he aparently comes not packed with Windows 7. Once I did the install and then plugged the Windows Mobile 6.1 device back in, then it is detectable.

  Thank you very much for your help!

  ME

• Windows could not get a list of devices from Windows Update. Try again later

  Original title: Windows 7 list printers cannot be updated
  I installed a windows 32 bit 7 OS several weeks ago on my workstation Futitsu-Siemens and followed the instructions on the HP Wizard to try to install the HP Deskjet 990c printer driver for my HP 6122 printer. According to the HP Wizard, the only way to do is to update the list of printers by clicking on the "Windows Update" button in the dialog "add a printer".  I clicked on this button several dozen times in recent weeks, and every time I get the message "Windows could not get a list of devices from Windows Update. Try again later.

  I installed a windows 32 bit 7 BONES of several months on my HP laptop and the printer list updated without a hitch to include many more HP printers that are on my computer Futitsu-Siemens including HP 990c.

  What should I do?

  Here's what I found my system which is an Z210 64 HP running windows7. I just updated my Bios to v1.35

  What I did to get the update to work once and what I have to do each time to add another printer by using the Update window.

  1. open (Ctrl-Alt-Del) Task Manager

  2. click on tab of abuse, then Services button (bottom-right)

  3. under the name to find "Windows Update".

  4. right click "Windows Update" and select stop. do not close

  5. open the Exploper window and browse to C:\Windows

  6 delete the folder "C:\Windows\SoftwareDistribution".

  7. go back to served, right click on "Windows Update", and then select start

  Now the "Windows Update" button should work. For me I have to do every time I have to install a printer that requires me to use windows update

  Looking for what casues the error

  at the bottom of a file named WindowUpdate.log located in C:\Windows after that I get the message "Windows was unabel to...» "I have this text below.

  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * START * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:18:782 284 5cc Agent *.
  2012-04-30 14:20:18:782 284 5cc Agent * Online = Yes; Ignore download priority = No
  2012-04-30 14:20:18:782 284 5cc Agent * criteria = "Type ="Driver"and DeploymentAction = 'Installation' and DriverClass = 'Printer' and DriverMatch = 'Catalogue'"
  2012-04-30 14:20:18:782 284 5cc Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-04-30 14:20:18:782 284 5cc Agent * scope of search = {Machine}
  2012-04-30 14:20:19:952 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:19:952 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:20:030 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:20:030 284 5cc PT +++ PT: Synchronizing server updates +++
  2012-04-30 14:20:20:030 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:22:183 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:183 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-04-30 14:20:22:214 284 5cc Misc Microsoft signed: Yes
  2012-04-30 14:20:22:214 284 5cc PT +++ PT: synchronization of applicable printers +++
  2012-04-30 14:20:22:214 284 5cc PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SyncPrinterCatalog failed, error is 0x8024400D, the soap client error = 7, soap = 300, HTTP = 200 status code error code
  2012-04-30 14:20:23:072 284 5cc PT WARNING: SOAP fault: 0x00012c
  2012-04-30 14:20:23:072 284 5cc PT WARNING: faultstring:Fault has occurred
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ErrorCode:InvalidParameters (7)
  2012-04-30 14:20:23:072 284 5cc PT WARNING: Message: printerUpdateIDs
  "" 2012-04-30 14:20:23:072 284 5cc PT WARNING: method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncPrinterCatalog"
  2012-04-30 14:20:23:072 284 5cc PT WARNING: ID:fd5a6897-e20b-4a8f-a118-c9c791da6851
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:072 284 5cc PT WARNING: PTError: 0x8024400d
  2012-04-30 14:20:23:150 284 72 c to THE cannot perform scan non-interactive if AU is interactive only
  2012-04-30 14:20:23:150 284 5cc Agent * found 0 updates and 17 categories of research; rules apply rated 193 on 660 deployed entities
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:23:150 284 5cc Agent * END * Agent: finding updates [CallerId = CDM] of
  2012-04-30 14:20:23:150 284 5cc Agent *.
  2012-04-30 14:20:28:162 284 5cc report REPORT EVENT: {C7177063-6BAB-4A17-AC0B-74B0D47355FA} 2012-04-30 14:20:23:150 - 0700 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 success CDM Windows Update Client synchronization software detected 0 updates successfully.
  2012-04-30 14:20:28:162 284 5cc CWERReporter finish event management report. (00000000)

• Adding a device to windows 7

  just instaaled windows7 and try yo add blackerry and iphone as a device but windows does not find or the other device. Yes, they are both discovery and sharing had been turned on...

  In addition to the advice of Richard Harper, your use of the word "detectable" suggests to you try to establish a Bluetooth connection.

  If that's what you try to do so, you must make sure that your computer has Bluetooth hardware and that you have installed the right driver Windows 7 for her.

  BlackBerry Desktop Software
  Pairing Bluetooth BlackBerry Desktop
  iTunes for Windows (iPhone cannot sync with Windows 7 via Bluetooth, USB or FireWire)

• "Windows could not get a list of devices from windows update"

  I've been looking for a solution for several weeks now. Many people seem to have the same problem. But no one has yet been able to solve the problem.

  First of all, let me clarify the problem explicitly:

  In the Add Printer Wizard: "Windows could not get a list of devices from windows update"

  Specifically, the problem is that Windows Update *broken* in the Add Printer Wizard. (Windows Update, otherwise works fine. But not in the Add Printer Wizard.)

  Find a workaround to add the printer, which mostly does not work what I have read, would be only to solve the secondary problem of the addition of this printer. Except, it would not solve the main problem which is Windows Update *broken* in the Add Printer Wizard.

  Details:

  I have been setting up three new PC running Windows 7 Pro 64-bit. I had to add an old LaserJet 5if connected to a former print server. I created the IP Standard port, then clicked on the "Windows Update" button to update the list of printers. It worked on the first perfectly, as it has in the past with other computers to this place. Then I started to work on the other two at the same time. I'm lazy and started to perform several tasks such as installation of MS Office, Security Essentials (less than 10 units at this office, BTW), etc. while the Add Printer Wizard was updating the list of devices. One of these things, I can't remember which, required a reboot.

  And that is where I am certain that things broke. Restart has occurred while the two computers are in the middle of the list of loading from Windows Update System. I not interrupted the first PC. But the other two were interrupted and now they can't get a current list of Windows Update.

  I tried the FixIt tool at http://support.microsoft.com/kb/971058 . He says he detects a problem and claims to have fixed. Except, it isn't - little matter how many times I run.

  Ideally, the FixIt tool above must be updated or a new tool must be created by Microsoft to resolve this particular problem. Type of the error in any search engine, and you will see this question from several years back. It's happens often enough to justify the creation of Microsoft or update a FixIt tool.

  Any thoughts would be helpful.

  I have exactly and that no ONE reads what you say or what other people say everywhere. Only the upgrade Assistant printer does not... The update of the Printer Wizard do not work. Windows Update works fine.

  Ronday,
  You are right that if few people read what they respond to these forums. That's the kind of non-response, I found everywhere on the Internet about this issue. (The value of the community is sometimes over-rated, if you ask me). Apparently, using characters fat is not enough to focus on the fact that the issue is not with the printer compatibility since, as I said clearly A) this printer has installed fine several times in the past with the same OS and in the same office and B) that I clearly THE issue is that updated the list of devices , in the Printer Wizard, *Do NOT*!  
  However, I came across a suggestion on another site. I haven't had the chance to try it at the location of this particular customer - I'll do it later this month. Here is the link to the suggestion for you to try as well. Scroll to the end to ignore any non-response:
  http://www.techsupportforum.com/forums/F217/Windows-Update-not-updating-632025.html
  'Michel' made the following suggestion:
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
  Hi, most likely caused by one installation failed (not the Wizard), you need to do a bit of detective work, lets first try the easy solution: -.

  1. go to start, run and type regedit.

  2. go to the registry editor for

  HKLM\software\microsoft\windows\current version\installer\inprogress.

  3. click the inprogress key and note the name of the file contained on the

  right to databasepath (must be .msi extension).

  4 rename inprogress oldinprogress.

  5. close the registry editor.

  6. open my computer.

  7. navigate to C:\Windows\Installer (Installer file is hidden by)

  par_defaut, views folder check "show files and folders" also uncheck "Hide protected system files", do not forget to cancel it when you're done)) and rename the file noted in step 3.

  8 restart the computer and try the installation again.
  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  If it works, then Michel deserves all the accessories. At least he or she tries to solve the real problem.

• Since upgrading my iPhone 5s IOS 9.3.5 yesterday, so I can't see the camera of the iPhone as a device in Windows do not seem to be a direct way to upload my pictures on my PC.  Is it possible to download my pictures to my PC without iCloud?

  Since upgrading my iPhone 5s IOS 9.3.5 yesterday, I see more the camera of the iPhone as a device in Windows.  Therefore, with this update of IOS, I do find a direct way to upload my pictures on my PC.  Is there a way to download my photos on my PC without having to download them to iCloud?  My PC is Windows 7 Pro (64 bit).

  What I've always done, is to download my photos directly on my PC by using the option to remove the iPhone with the download.  I really want to continue to do so!

  Thank you!

  Hello

  Follow the steps here:

  • Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
  • If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• Structure of the event can detect the minimized window

  Can the (LV 8.5.1) structure of event to detect when a window is being reduced?

  Yes, you can!

  The event 'Panel resize' is the raised event:

  

  Tone

• DirectDraw application will be black screen once what output device in Windows 7

  My directdraw full application screen, screen will be black once what output device in Windows 7
  but it never happens in Windows 2000 or windows XP with DX9.0c
  Is - Windows 7 or caused DX11?
  Is there a solution?

  Fri_fiscan,
  More than likely the games you are trying are not compatible with Windows 7.  To check go here: Windows 7 Compatibility Center also there is a thread of people discuss issues with DirectDraw.  You can take a look and see if there are all the elements that can help.

  Wire direct Draw Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the USB Audio device in option audio device for Windows XP?

  USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you

  Hi VincentMr,

  ·         What is the brand and model of the USB audio device?

  You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.

  See the following article for more information on the update of drivers:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Let us know the results.