Detect if the Group has a 'color' set on it (see picture inside)

Similar Questions

• ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

  Hello-

  I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

  Thank you

  mgmartinelli

  Future viewers of this post.

  I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.

• which detects that the user has changed the clock of the device?

  Hi all my application dependent on the clock time in the device settings. who can my application to detect if the user has replaced the unit time? Thank you

  Salvation;

  It's the Question2:

  and I found the solution:

  bps_initialize();
  Subscribe (clock_get_domain ());
  clock_request_events (0);

  void ApplicationUI::event(bps_event_t *event) {}
  unsigned int dcode = bps_event_get_domain (event);
  If (dcode is {clock_get_domain()})
  unsigned int code = bps_event_get_code (event);
  if(code == CLOCK_INFO) {}
  Q_EMIT dateorclockuserChanged(); signal function qml
  }

  }
  }

  Thanks a lot for your help

• WHAT SHOULD I DO WITH THE FOLLOWING ERROR? "The location of the browser has not been set. Please this in preferences.

  When I click on a link in a PDF document is saved OR try and access to the Adobe knowledge base help (ie the link to the Adobe web) in Windows Vista Adobe Reader 9.2. I get an error message that says: "the location of the browser has not been set. Please this in preferences.

  NOTE the document / links opens as expected when the PDF is opened / displayed in a web browser.

  It didn't improve the security settings

  Does anyone have some sense on what the problem is and / or how to fix?

  Thank you.

  Hi Alex Moss,

  You can try after the troubleshooting steps in this thread: the location of the web browser has not been clarified. Please do this in preferences.

  Let us know if that helps.

  Concerning

  Sarojini

• ERROR: no boot disk was detected or the disc has failrd

  HP ENVY h8-1534pc with windows 8.

  error: no boot disk was detected or the drive failed.

  tried to run the recovery cd ROM even error. No cd or hard drve no indication in the boot order.

  out of resources

  Hello! Here are a few responses from members of the forum about your problem. See if you can find a solution from them. http://h30434.www3.HP.com/T5/forums/SearchPage/tab/message?filter=labels%2Clocation&location=Forum-Board%3AOSandSW&q=no+boot+disk+has+been+detected

  Dokie!

  PS It doesn't look good for me. Good luck and thanks for posting back.

  It has been my experience in the past that a message as this means that either the operating system is corrupt or your hard drive is dead. If your hard drive does not show in the boot order, it's a major sign of a bad HD, but not100%.  There are several free testers HD. Most have the back, which means that you don't have to have an operating system to start their. If you are not able to test your HD with F2 or F11 functions, try one of them. You will need to burn an ISO to a CD file.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  PS2 there may be answers best of the latter. Weekends are slow at times. I'm still slow

• Detect whether the mouse has left or entered in the browser window

  Hello

  I use v2014.1.1 EA

  I need to hide a symbol when the mouse leaves the browser window and display the symbol again when the mouse enters the window of the browser.

  Then when the mouse is entered in the browser window, if it does not move for a few seconds, the symbol has to hide again.

  If someone has done something like this?

  I fight because I'm not sure how to target the window or viewport.

  Thank you

  A

  He did it in the end:

  {$("body").mouseleave (function ()}

  DoSomeStuff;

  });

  {$("body").mouseenter (function ()}

  DoSomeStuff;

  });

• Detect when the user has clicked on the Reset setting

  I'll put the PF_ParamFlag_SUPERVISE indicator for my slider like this:

  PF_ADD_FLOAT_SLIDERX ("MySlider", 0, 0, 256, 256, 123, PF_Precision_INTEGER, PF_ValueDisplayFlag_NONE, PF_ParamFlag_SUPERVISE, MY_SLIDER_DISK_ID);

  
  

  I get the PF_Cmd_USER_CHANGED_PARAM command when I change the value of the slider (1 case). I also get the command when I hit the "Reset settings" button on the right (case 2) in the effect controls panel.

  Is there a way I can distinguish 2 cases 1 case? I need to take additional steps to 2 cases, but PF_UserChangedParamExtra contains only the param_index.

  
  

  Thank you very much
  

  Hi tashi.maya,

  Unfortunately, there is no specific API that distinguishes a reset a parameter change.

• What is the best way to detect if the device has a touch screen?

  How do detect you if a device has a touchscreen with version 4.7 of the OS?  With the upcoming 9630, that I need to know he can't stand not touch.  Thanks for the help.

  ~ chris

  No Touchscreen.isSupported () not doing it for you?

• Pavilion 500 - C60: new office reads, "ERROR: no boot disk was detected or the disc has failed" at startup.

  Just bought Pavilion 500 - C60, running Windows 8.1 64-bit and am doing everything on old HP running Windows Vista Home Premium SP 2. Has not gone smoothly from one thing to another, but I think everything comes together. A couple of days, began to receive the error message at startup or, if I COULD do so that it starts would go for awhile and then would get an ERROR message, requiring restart. Usually after obtaining the error message several times, the computer would then initialize. Tonight, I couldn't override the error message for anything! When you press power button / stop, I hear (HD) running for a few seconds, everything is silent, and then the error message appears on the gray screen dark in white letters, BACK very and sinister looking! Any suggestions? Had the computer about two months and it has not been easy.

  Not good!  Check all the connectors and the hard drive to make sure that they are correctly wired in place. Make sure that your cable is not reversed.

  Contact the seller if still under warranty for repair.  This could be the hard drive or motherboard and the problem lies the only diagnosis from a repair facility.

• Why the screem has increased so I can't see the arrow back?

  Why is the screen view area increased?

  Hello

  He could have an automatic update, corrupted graphics driver, etc.

  There are a number of things to try:

  see if changing the resolution of the screen, without updating the drivers graphics, work

  otherwise:

  go to your graphics card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and if an update that caused it to change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Reproduce the effect of ink (see picture inside)

  Hello

  Does anyone know of a plugin that can do this effect to images?

  

  

  PS what is the proper name for this drawing technique?

  Kind regards

  Eric

  http://forums.Adobe.com/message/2187966#2187966

• Detect if the time information dialog box controls user has been activated

  Hello

  I have to make a few changes to my project. I can't edit existing program blocks, so I have to find a way to detect if the user has pressed icon for user dialog box to set up (control type is Time Stamp). I have now, I can compare the current values with the values from the previous loop pass, but this isn't an option.

  I'm looking for some kind of property as active control node or something similar.

  It does not exist.  You can create your own time stamp control (like an XControl), or you can simply watch to see if the window is displayed. You can do the last using VI server functions or you can use the API of the operating system. For Windows, you can use the LabVIEW Windows utilities library.

• Detect if the time/date browse button has been used

  Hello

  I have a checkpoint vi for the indexing of the elements inside the table and shows the date and the corresponding time. I have the large number of control inside my block signals, but I removed all the blocks out of words and signal for this discussion. I replaced all the unnecessary controls with constant values, so don't waste time analyzing.

  If you take a look at my vi, you'll see Star/Stop control, control of Position and an indicator of time stamp (time waveform) with a browse button date/time of another control of time stamp. I have all the features you want, but I have the problem when you use the button browse to bring up the time. I can't put my time twice in a row to the same value as I compare value "Last entry of time" with a current comes to enter. I wouldn't completely change my blocks because I use a lot of variables and property inside my project nodes. I'm looking for a way to figure out if the time/date browse button was pressed so I could jump to the desired in my registered wave point.

  I'll skip the actual implementation of what you're doing because it's not all that clear to me and answer the question about to detect if the button has been pressed. This general question came several times before in this forum. There is no built-in mechanism to detect that the Browse in a timestamp control button was pressed. When you click this button, it actually opens a VI with the title 'Set Time and Date'. For example, you can monitor to see if this window opens.

• How can I detect when the last container in my stream is full?

  I have a bunch of related containers which I am flowing text through. How can I detect when the text has filled a container? There's an overflowPolicy then I guess it can be detected.

  Hello

  I used this:

  private function IsOverset(textFlow:TextFlow):Boolean

  {

  var zeComposer:IFlowComposer = textFlow.flowComposer;

  var iTextLen:int = textFlow.textLength;

  var iNoController:int = zeComposer.findControllerIndexAtPosition (iTextLen - 1);

  return (iNoController is-1);

  }

  HTH,

  J.

• Establishment of users to the group operators of

  Hi, I played with the creation of a user who belongs to the Group of operators. I want this group to handle all requests for delivery. I have granted the group level privileges menu, and I can see users > manage and groups > Manage. I can research groups and get results, but when I search users, apparently Virgin. So basically, I can set up users, but can not search for them. A reflection on what parameter/authorization, I need to give this group of operators?
  
  Thank you
  
  Tony

  To view the users, you need to do a group one admin for the Organization, that users are Member. Or in your case, add the operators of the Organization as an administrator group.

  -Kevin