Determination of VO with AM

Similar Questions

• Determining direction HALL with counter

  Hello

  I need to acquire two signals of a HALL sensor on a test system, where an engine is running. The sensor system signals two squares. I need to determine two things:

  1.) number of pulses (degrees counting)

  2.), direction Tunring.

  Counting pulses is very simple with two counter inputs, for example with a PXI-6602. But what is the right way to determine the direction of rotation (phase shift between two signals: + 90 ° CW = ;-90 ° = CCW)

  Any help is welcome!

  You're essentially talking about a rotary encoder. There is a counter input angular encoder via DAQmx option that already performs the decoding of it for you. Two signals (A and B) of probe is wired to the inputs of a meter and the number of pulses is counted and then put on the scale. In addition, the CI DV encoder count upwards or downwards depending on whether A leads to B or vice versa.

  http://www.NI.com/gettingstarted/setuphardware/dataacquisition/quadratureencoders.htm

  https://decibel.NI.com/content/docs/doc-17346

  If you are still using an FPGA device there are a number of examples easy to write your own decoder of a pair of digital inputs (more a Z reference if you wish).

• Driver power state failure - cannot determine the issue with the driver

  I had this problem for a long time, since the upgrade to Windows 8 beta, did not happen on Windows 7. WIN8 (clean install), 8.1 and 10 technical preview all do the same thing. I get the BSOD with a message about the failure of State driver, and my system restarts. It happens a few times a day. I noticed a few times, my devices Sata work stop shortly before the accident, sometimes apps are block just before, but not always. No index than that. Help, please! TIA!

  Empty the file: https://onedrive.live.com/redir?resid=984652FADD494F38%21315502

  ZARNet

  This phenomenon was related to the storage IDE ataport.sys driver.  I also notice that you have a 2009 jriad.sys driver.  I remove the 2009 driver and perform an audit to systemf on BONE Island, but it can be associated with HD and not driver related, which would explain why it happened in all OS' are

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• problem with windows 7 starter Autoconfiguration IPv4 address and IPv4 address

  I can not change or disable Autoconfiguration IPv4 address in the ipconfig-all command

  I can't connect to the network any ip iput ditect as duplicate.

  can anyone help?

  ipconfig-all

  Windows IP configuration

  Name of the host...: xxx - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8168B/8111 Family PCI - E Gigab b
  It Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-50-DB-00-15-2E
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.242.251 (Duplicate)
  ... Subnet mask: 255.255.0.0.
  IPv4 address...: 192.168.20.155 (Duplicate)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {F0C7F7B4-DF88-4908-A9C1-F8B888710CAC}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hello

  If a computer is only connected to a switch, the automatic configuration is not valid.

  Autoconfiguration applies when a computer is connected to a server that can provide the configuration.

  Wireless routers have a DHCP server that provides a valid IP address.

  Ordinary switch is a transparent network device that cannot provide any configuration.

  When there is no DHCP server, the computer must be configured with a static IP address.

  Look at this page, http://blog.mclaughlinsoftware.com/2009/11/26/windows-7-static-ip/

  Follow the path as described in step 5 (Do not pay attention to specific numbers, your number is to be determined in accordance with your network plan).

  Maybe you want to provide an explanation of what you are trying to reach.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Integration of the OPA 10.4 with Oracle E-business Suite

  We have a requirement for the integration of the OPA 10.4 with Oracle E - business suite.

  The condition is hypocritical:

  (1) EBS can call rules of the takeover bid on any screen - I think that this will be achieved by Oracle determinations Server (ODS) with probably a middleware between both to facilitate the exchange of webservice.

  Request- I just wanted to know if there is another way to better or if it is only best option?

  Are there examples of projects or pointers that can help us get a better understanding of the present?

  (2) given certain conditions of release in EBS, the modules of the OPA may be invoked, but this time there may be a few involved OPA interview screens.

  Request- How to proceed and achieve this goal?

  Any help on the above queries is really appreciated.

  (1) it is for an older version of OPA, but you might find something useful in this tutorial.

  (2) launch a browser window in passing a single parameter "caseid" to OPA startsession URL, so that a data adapter that you write can load and save data interviews of EBS based on the id of the object.

• Export of determination is not original timilene Minister

  Hello

  I edited a short film in first CC with RAW BMCC original files then exported as an XML to Davinci resolve for color grading 12.

  After completing the look of the film in Davinci resolve, I exported DNxHD 1080 p 4:2:2 back imported preview and quicktime Mov file.

  I couldn't place the mov file in the timeline for some strange reason, the first will not allow him and show a sign of the cross. I had to create a different chronology of the mov clip and copy the video track on the new timeline in the project timeline in order to place it. (New sequence of the clip)

  When you place on channel V2 above the original edition premiered at V1, there is a mismatch in the speed of the game and rate from the original timeline and so everything is completely out of sync.

  in trying to match individual plans in exactly the same time code, there is always a difference and they just won't sync.

  It's very strange.

  Setting sequenced in first and davinci resolve both set at 25 fps (all shot with 25 of the BMCC image frequency)

  Why solve change something in the calendar.

  I can't finish my project.

  Please I need your help with this!

  The first thing that stands out for me in the use of QuickTime.  I'm not a fan, so my practice and the recommendation is to not use it when possible.  This will avoid the problems associated with the use of QuickTime (which may or may not apply here).

  This is a thread to pull.

  LLA 'traditional' method of replacement of the media in a project PP is to rename the media with PP closed folder, and when you reopen the project, PP will ask you where is the press.  You point to the location of new media.  A potential problem I see here is that new media are not coterminous with the original, assuming that the clips of determination are created with only the used part of the original, perhaps more than a few handfuls.  Timecode in the original and copy this timecode to the new media should eliminate this problem, you can set PP in respect the timecode for the new media so that everything lines up correctly.

  This is a second thread.

• Determine that which VM have the RDM

  Is there a command for Service Console or means in Virtual Center to determine what Vm with RDM?

  Mike

  You can use vimsh to query on the Service Console for VM (s) with ROW (s). I wrote a shell script called rdm.sh that you can download and use at: http://engr.ucsb.edu/~duonglt/vmware/

  If you want to query on several ESX(I) hosts or a vCenter, take a look at this reporting tool that I wrote: http://communities.vmware.com/docs/DOC-9420

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Change the format of the OPA Web determination effective date

  Hi all
  
  We tried to change the format of the date of entry in the user Web interface of OPA determination. Currently, with installation by default the format of the date is DD/MM/YYYY. We want to change this entry to YYYY-MM-DD format.
  
  Can we specify our format of the custom with the locale entry date?
  Please let us know if you have any suggestions how this can be configured using the OPM.
  
  
  Thank you and best regards,
  Suchitta
  
  Edited by: Suchitta Bhattacharya on June 30, 2011 02:58

  Hello.

  You can change the format of date of entry by adding the property "entry-date-formats" in the application.properties file in the Configuration section of the web analyses.

  If you need to change the input format to support multiple locales, you can create multiple .. Properties files

  For more information, see the section Files of Configuration Web determinations in the Oracle Developer Guide political Atuomation (online at http://download.oracle.com/docs/html/E20841_01/toc.htm). It would be simple search 'record - date formats.

• outcome of conversion with loss of the csscan data dictionary

  Hello
  
  I ran csscan week last to a migration of US7ASCII to WE8ISO8859P1 character set. I was a little surprised to see the message in the .txt file that the data dictionary could not safely migrated by using the CSALTER script.
  
  The table was sys.histgrm$ and there were two lines which had a conversion with loss. Later, I found a script in the docs under the "how to handle Convertible or lossy data...» "documentation of globalization and executed the script. He showed me the objects that are the problem, but one of the two steps that was spoken in the docs who have discussed how to handle this error let me in a bit of a loss.
  
  First step was to confirm that FROMCHAR was the real character in the database. I confirmed.
  
  Second step was to correct the object definitions. That is my problem. The object of two who have been identified were a table and a table for that table partition. How can I determine the problem with definitions of dba_objects? How can I determine if there are special characters in the definition of the object?
  
  I haven't found anything on Metalink still dealing this yet so if someone can point out a note, please do.
  
  Thanks in advance!

  The column is of type VARCHAR2 or NVARCHAR2 (I forgot to ask for values of col$ .charsetid and col$ .charsetform columns). In a database US7ASCII, VARCHAR2 columns must not contain anything that would cause such a strange histogram endpoint value.

  You can try this:

  SELECT u.name 'Plan', 'Table' o.name, c.name "column.
  U sys.user$, o sys.obj$, sys.col$ c
  WHERE u.user # = o.owner # AND o.obj # c.obj # AND =
  (c.obj #, c.intcol #) = (SELECT obj #, intcol # sys.histgrm$ FROM WHERE ROWID = 'AAA...) »)

  This should give you the column which poses problem. Could you look at the data and see if it is actually 7-bit ASCII?

  The bug I'm talking about has not been diagnosed, I think. I'm trying to diagnose by asking yourself these questions. For this particular case, I'm trying to find out if the problem is with the abuse of the data type VARCHAR2 for the epvalue column or if you actually have these strange data in the affected column (for example, incorrectly stored encrypted values).

  The solution is simple: drop the statistics for the affected columns and re-create them after migration.

  -Sergiusz

• Reset the iPhone4

  I need to reset my iphone 4.

  Home button on my iPhone 4 does not work. My screen is black but I can still hear sounds from your phone. The rings of its loading when I plug it but the screen is black. I can't reset it with itunes cause I have to disable find my iphone. What can I do to reset?

  0 following

  Hello, DudeFactions!

  Thank you for using communities Support from Apple. After reading your post, I understand that your iPhone screen 4 is completely black - but you can hear the alert sounds. You want to restore the iPhone using iTunes, but since you cannot disable find my iPhone and your Home button does not work, you are not able to. I rely on my iPhone every day, so I know it is important to get the device working again, and I'd be happy to help you!

  As the Home button does not work, I would recommend getting the iPhone physical inspection. A genius or a technician certified by Apple can fix the Home button, as well as determine what happens with your display and to provide you with an appropriate solution. If you are able to bring the iPhone to an Apple Retail Store or Apple authorized service provider, you can use the following link to find places, find contact information and plan reservations.

  Apple - Find locations

  You can also speak to Apple directly support to consider additional service options, as the service by mail. You can contact Apple support by topic on the following site.

  Contact Apple support

  See you soon!

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite M105-S3084: is not possible to record streaming audio on the web

  I have a laptop M105-S3084 Satellite with XP MCE SP2. The sound card seems to be something called "Realtek High Definition Audio" on a bus to internal. The driver is 5.10.0.5200 dated dated 09/12/2005.

  This sound card and driver seems not to have what is necessary to allow me to record audio streaming on the web.

  I've been on audio NoticiasLA and determined that although with as SoundBlaster sound cards can save essentially anything that can be produced by PC speakers, this is not the case with the map I have in the Toshiba Satellite.

  For example, only flow for record in software like Audacity and others are 'Mic' and 'Line' all that is available with other cards is several other inputs (Audio mix, etc.) that the software allows to record the sound from the web browser.

  Other than to get another PC or sound card, is there a way to improve the capabilities of its Realtek High Definition Audio card? Others were able to achieve sound web using this sound card?

  Thank you.

  Hello

  I use two programs to record the sound from the internet sites;
  The first is wave-recorder and the second Messer.
  These two applications allow you to record from wave and convert and save files in MP3 format.
  You can choose the source of the record; the external microphone or wave.

  Check it out. In my case it works and I m very happy

• Browser of network (over ip addresses)

  Does anyone know of a network browser Android who don't use ip addresses but can actually determine and work with host names. For most people, their networks have a DHCP server so the IP addresses are assigned dynamically, an ip address is not only obscure but will change with time.

  It is a common problem of Linux but Nautilus on Ubuntu Linux handles quite well. Linux command nmblookup can retrieve an ip address of a host name. Is there an application better than AndroXplorer or ES File Explorer ?

  Even for lending money?

  
  

• Authorizing the Audible account

  Is someone of other problems I see with Audible authorization?  I chase it with sound/Amazon technical support, but after a few days they have not yet come up with something useful...

  Question: I'm working on a backup PC that has not been authorized against my Audible account.  That is why, when I try to play an audio audio book in my library I get a UAC prompt asking if Audible iTunes account operation can make changes to my PC (I click Yes) and then get this message in iTunes:

  

  Clicking Yes take me for the Audible web site... one of the questions that may be little matter what I do it takes me on the audible.com website even if my account is Audible UK (audible.co.uk):

  

  However, even if I am on the site of "bad" I enter my username and password and, as expected, get this response:

  

  By clicking click to return back me to iTunes as expected; However, I get a confirmation prompt that I allowed the PC to the audio carriers successfully, and try again to play the audio book takes me right back to:

  

  Other points which may be relevant:

  • I am running iTunes 12.3.2.35 (the build 'day' for a few days ago) under Windows 64-bit edition (fully updated) 10
  • I tried to change the default from the edge to IE browser - behavior such as described above is the same
  • Sound technical support suggest that the underlying problem may be that I am at the limit of four authorized devices.  I lived allow it out of process on the computer I'm on (in case there was an authorization of "rogue" already present) and two others, I have immediate access to the - in all three cases, I got a dialog box in iTunes confirming that exercise it had succeeded. However, the entry in the iTunes Store menu passes ever of "Remove authorization iTunes account...» ' to ' allow iTunes account... ". ».  I honestly can't remember if this is expected or not, given that the switch was done in iTunes 12.2 by the manipulation of permissions sound entirely in iTunes for the ongoing process by using the Audible web site,

  Someone at - it see something similar or able to provide possible remedies?  I know I have touched this issue in the relatively recent past but have always been able to resolve encounter from iTunes, quit iTunes, restarting, from iTunes and reauthorizing... a process that is a gesture of challenge does not work on this occasion.

  Looks like I have determined a solution, with the help of troubleshooting of the Audible.  It determined that somehow I have exceeded the number of devices that may be allowed and were able to put this.  Although I was unable to immediately solve the problem on my backup PC, I was able to test it on another machine that didn't previously no sound support in his iTunes library.  In this case, I was asked to allow the computer during the process of importing files - and it was a success, allowing the audiobook to play.  I then went in the same test on my backup PC case, i.e. adding Audible content from my library rather than to play what was already there... once again, I was prompted to allow during the import process, it worked for the files I've been adding and, also far as I can tell, for the other audio already in the library.

  Thus, although the authorization for Audible system is heavy and sometimes produces either no error message or mislead, there is a solution to this specific problem.  I'm still trying to determine whether their authorization works only on a base unit or on a combination of software and peripheral - I feel that my having exceeded the boundaries of the unit were the result of having authorized iTunes playback and the tool Audible Manager on the same physical hardware.

• sleep mode wake

  Wakes up, and the screen disturbs the sleep of babies!

  My beloved iMac 27 inches, mid-2011 has started this problem after the update from Apple. The computer wakes up and turns on the monitor (very bright) when the person has touched. This is a behavior much unwanted.

  Inspection of syslog shows what is happening every 10 min. I tried unplugging all USB devices, nothing helps. I do not want to disable the 'siesta' mode, because this computer is used for the print server. Any help would be appreciated; If this continues, I will sell this device.

  [fds@falcon ~] $ syslog | grep-i 'Reason Wake'

  25 Dec 12:28:10 core Hawk [0] : Wake reason: EHC2

  25 Dec 12:48:19 core Hawk [0] : Wake reason: EHC2

  25 Dec 12:58:59 core Hawk [0] : Wake reason: EHC2

  Best,

  FDS

  EHC2 can be any number of input, including Bluetooth devices, so if you use BT one or several of its devices may be defective or require an update of the firmware. Open system preferences > Bluetooth to determine devices associated with your iMac.

  Does your system preferences > Energy Saver show Power Nap is an option to select? If your energy saver has an option for the NAP, something is wrong with your OS X installation because Power Nap is not supported on an iMac of mid-2011. All that would be necessary to enable it to function as a print server is to select 'network access' and select the share option is appropriate.