Determine the CPU usage, if a laptop is plugged in, etc...

Similar Questions

• Satellite C650D - the CPU usage is jumping around

  I bought a Toshiba Satellite C650D 2 months ago and I used the Windows 7 that came with it, thinking that it was fine and dandy until a few days ago, he started having random lag spikes.

  At first he just happen when you watch movies (tried 4 different programs, all reinstalled the driver, scanned for malware, defragmented, you name) and then she started to occur outside the viewing of film aswell. Who did it for me, and I installed Windows XP. I did 3 times now, clean install it Windows XP. Initially, it seemed fine. For a few hours, and then it started lagging really bad, not like in Windows 7, but the CPU usage is jumping all over the boundaries between 1% and 99% at random, but there is no process to take it!

  He lags behind what I do, just open the Notepad can blow. I thought that it would work with a format clean, but no, of course the problem reoccured. It might be drivers, see problems in Windows 7 and XP are somewhat different. I'm in my intelligence ends here on what to do, whatever that is would be helpful.

  Hey Buddy,

  Looks like on your laptop is a background passes process that is causing this different and high CPU usage.

  What happens if you install Windows 7 Toshiba Recovery disk and look in the Manager of tasks? Directly after this installation, you should have a low CPU usage and stable because it s installation of Windows from Toshiba.

• Satellite A45 - the CPU usage is high and slow applications

  Hi all

  I'm trying to debug a hardware problem on my Toshiba Satellite A45. I am running Ubuntu 10.04, but I don't think that it's operating system or related software.

  THE PROBLEM: The CPU usage is high and applications slowly to a crawl after using an intensive application of memory for a few minutes, i.e. to watch a video or a game. Basically, anything that could use the screen much. If instead, I work only from a prompt, even when the application could do a lot of work, I do not encounter this problem. After stopping all applications, the CPU usage is always higher than normal (90% idle, should normally be slowed down to about 99%).

  Xorg now typically showing about 6% (normally use< 2%).="" if="" i="" at="" any="" time="" after="" this="" try="" to="" work="" in="" any="" application,="" usage="" is="" still="" bogged="" down.="" only="" a="" reset="" gets="" me="" back="" to="">

  Note: My system has always worked very well and I did not made the installation of the software or changes when it started to happen.
  However, the laptop is a 800 miles round trip at the rear of the car in a padded bag.

  DEBUG: This doesn't seem to be the RAM that I replaced the RAM and reinstall the RAM, and the problem persists. This doesn't seem to be the hard drive that I can try to run it from a Live CD (without use of HARD drive) and yet everything slows to a crawl.

  HELP: I don't know how to debug from here.
  I don't have extra pieces of hardware to make swaps.

  Any ideas more how to debug this?

  Thank you
  Grommit

  Hello

  > I am running Ubuntu 10.04, but I don't think that it's operating system or related software.
  It s interesting why you think that this may be software related issue

  I think that it is a typical software problem because the RAM and the HARD drive has been verified you have reported this in the message

  So what to say maybe some virus or malware likely to obstruct the CPU and the memory usage
  Or there is some process in the background that are not properly

  I recommend you to reinstall the Windows operating system or another distribution of Linux that runs NO Live CD, but which is installed on the HARD drive
  I m sure that s kind of the process that is disabled and crashes somewhere in the background

• Satellite P100-219: model seesaw in the CPU usage graph / wireless switch

  Has anyone noticed a trend sawtooth in the graph of CPU usage (quickly repeat that 10% performance spikes) in idle operation? Crampons disappeared after I switched the wireless (WLAN & BT) light...

  Hello

  Usually, if the 3rd program tries to connect to the WLan or the BT will increase the CPU usage. It s not easy to say why it happens because no one knows what you have installed on your laptop, or what settings unique applications have.

• AppleMobileDeviceService.exe always takes 50% of the CPU usage.

  Original title: year App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I'm not using iTunes.  Said Apple iI should ask Microsoft.  I use oper AX. sys.

  An App called AppleMobileDeviceService.exe constantly takes 50% of the CPU usage.  I am not connected to iTunes and my iPod is connected to my PC when this .exe runs with 50% usage.    Apple suggested that contact Microsoft.  I use oper AX. sys. Apple has suggested to contact Microsoft.

  Hi Armycyrus,

  Have you done a recent software or hardware changes to the system?

  Method 1:

  If iTunes is installed on the system, you can try to uninstall and reinstall the same and check if it helps:

  For more information, see the article:

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  Method 2:

  It seems to reset Winsock has solved the problem:

  For more information, see the Apple support links:

  HT3204 Apple Device Support hogging CPU, impossible to download podcasts

  Apple on Windows software: can see the performance problems and virgins iTunes Store

  Alternatively, you can try to reset Winsock and check if it helps:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  Important: The foregoing contains as follows to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

• CPU problem. The CPU usage is erratic and the RAM is regularly high

  CPU question

  I can't navigate with my huge memory and laptop good performance because the CPU usage is erratic and the Ram memory is regularly high. For now, 1.7Gigs is my memory on my 3 GB of ram. How can I solve this problem? My computer problems are related to the navigation.

  Hi Sean,.

  ·         Since when are you facing this problem?

  Method 1: Start your computer in safe mode to check the issue. Report of the results.

  Method 2: Run the next Fixit tool to check the issue.

  Difficulty of Windows system performance slow computer problems

  Method 3: Check to see if this article helps you.

  Optimize Windows Vista for better performance

• (Redirected) Computer beeps during use. Maybe high disk or the use of the CPU usage?

  New here and new to Dell computers. 1st stop, I have a Dell XPS 13 "i7 6560u 16 GB and SSD 512. When using the computer, I get a series of 2 beeps. It seems to be related to the high use of the disc or the CPU usage. I guess my question is possible to put these notifications for a longer delay or at least decrease the volume of the beeps. I am aware that when I use one of my CSD programs to open a browser and looking for an answer to the question about what there will be times where I could get high uses a of these, that's all just annoying and not really want to turn them off entirely (option I would) I would delay having more time this will happen to until I get through this ,

  I thank you,

  Ben

  Hi w4qed,

  Please repost this in the laptop computer forum help.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• The CPU usage goes to 100%

  I have a laptop Dell Studio 2010, the processor Intel, 4 GB of ram, hard disk 320 GM (180 GB consumed) running Windows 7 and IE 11 giving me CPU usage problems.  I don't know what everything is related, so here's the story.

  I lived my download speed slow - dropped by half every 2 hours or more after a reboot.  Occasional problems with the speed of the computer as well, and when I checked the resource monitor I see the CPU usage hit 100%.  A reboot has always solved the problem.  Running in Mode safe mode eliminates the loss of download speed so I knew it wasn't a problem with the hardware or my cable modem or a wireless router.  I have explored many possible problems, but none solves the problem, then I reinstalled Win 7 Friday, January 16.  Download speed, not only fixed but faster than before.  It remains stable and do not disintegrate so there was something wrong with the OS, etc.

  However, the problem of the use of the CPU remains.  What seems to happen is that something triggers a high demand and then all processes on the computer joins.   When I look at the resource now monitor consumes 1.3% of CPU, but when things are choking it consumes 15% of CPU and go all processes running as 0.5% to 5%.  So you can't point to a single process as the culprit it is possible that web sites of strong demand (lots of ads) trigger the problem.  I'll do some research on that.

  I did a lot of web research as well as this forum, and no patches seem to work or apply to me.  I ran a Malwarebytes scan and a full virus scan with Microsoft Security Essentials: nothing found.

  The computer is almost 4 years, but I wouldn't spend the $$ to replace and find that the problem is software.  Any ideas?

  The problem solved when I've upgraded to Win10 on this machine.  At the same time degradation download speed (with time) newsletter is resolved.  I can't imagine how everything worked but I discussed the idea with several IT people I know and have gotten various suggestions.

  Since a clean installation of the operating system has not fixed it, I do not understand why install Win10 fixed, but that's it.

  Since then, I've replaced this computer.

• The CPU usage goes to 100% frequently for all the computers on the network.

  Hi, I'm an engineer, for the past two weeks, my users are complaining about slow and found the CPU usage goes to 100% frequently, as we have laptop Dell Latitude with i7, 4 GB memory, Win7 64 bit OS. but this problem is din't solve even after fresh OS installation.

  Check your remote destop setting. When something like that happens, its been my experience that someone or something keep 'rattling' computers trying to connect to them i.e. virus/trojan or something that someone installed which is now trying to hit everything on the network.

• Anyway is to free up the CPU usage by removing unnecessary programs, of a plant to buy computer?

  Anyway is to free up the CPU usage by removing unnecessary programs, of a plant to buy computer?

  • For example, help Hp or programs of this type.

  To determine what is using the CPU more...

  CTRL + SHIFT + ESC to open the Task Manager

  Click on the header of the CPU until the processes that are using most of the CPU are grouped in the upper part.

  As a general rule, the upper entrance should be System Idle around 96-97%.

  So, what are your three high entries on the page?

• the CPU usage is high

  If the CPU usage is high in esx server? HW can u determination say problem?

  ESXTOP is a tool through which you can know the CPU usage statistics in the process that is stealing cycles CPU. Alternatively, you can refer to this article that can help you debug the much deeper problem.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1077&sliceId=1&docTypeID=DT_KB_1_1&dialogID=215052615&StateID=1%200%20215056913

• The CPU usage of Flex-2 15 30% when idle after upgrade to Windows 10 * contains large Images *.

  BTW my 15 Flex-2 upgrade to Windows 10 Home took place, working after a few minor updates manual driver (WLAN, graphics)...

  However, since the upgrade, I feel an annoying symptom, which has been reported by users of other brands as well.

  Although I already follow most of related advice (known assassination unnessary process, change of reports), the CPU usage is still constantly around 30%, causing the fan to operate continuously and even more unsatisfactory: extremely affecting the battery life! Using processexplorer that I discovered, that svchost (or one of its processes) is at the origin of the problem, not one of the applications. As I am not able to dig deeper, I wonder what measures taken so far by Lenovo to have the Microsoft fix this problem.

  Attached: screenshots 'notification', 'Treaty', 'system '.

  Other tips are appreciated.

  

  

  

  Mod edit: added warning about large images for those who have slow Internet service.

  UPDATE Oct10:
  

  Went to manually check tile Lenovo Support and offered an update of SystemInterfaceFoundation.exe.

  Run the update and believe it or not: the CPU usage is almost back to normal (about 4%) with browser open FF and AV SW race. less than 2.5% use svchost. Fan turns down to 'stop' or low speed.
  Can someone pls? Be wary of situation for the next few days...

  Update Oct11:

  No idea how to mark this "resolved" thread: System runs stable like a charm. Quiet, low CPU utilization and the normal battery life.

  No other text. Problem solved. See above

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• How to get the CPU usage in LabWindows using C program

  Hi all

  Please help me...

  How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.

  Any help with this will be appreciated.

  Thank you in advance

  
  

• In the "CPU usage history" Task Manager, which is the length of the story

  Work Manager "CPU usage history" view which is the length of the story?

  Stephanie

  There is no time for the CPU usage history

  How reach you that conclusion?

  You can change the timespan by changing the speed! You have high, Normal and slow. The displayed time interval will vary depending on the setting. You also Pause setting, which freezes the display.