Determine the Version of "Update" to vCenter

Similar Questions

• HP ENVY j073ca: unable to determine the version of HDMI output on my laptop HP envy. It is 1.3 or 1.4 bis?

  Hi I tried to determine the version of my laptop HDMI port HP ENVY 17 j073ca however I have found no info on this subject.  Could anyone help shed any light on this?  Thank you!

  Hello

  Many TV can make upscan which means that they accept the entry at lower resolution and then fill the entire screen. I don't know your TV/monitor, but normally it can do the work in this way.

  Update: all modern televisions must have a lot of options for entry reports, you can watch old movies (ratio 4:3) on the use of 16:9 zoom function.

  Kind regards.

• How can I determine the version of Toshiba Assist?

  How can I determine the version of attribution that is installed on my Satellite X 200 with Windows Vista Premium SP 1AA. Operating system?

  Go to the control panel and start the option programs and features.
  After full load, you will find listed Toshiba Assist it.
  Click on it and on the bottom, you will find information about the version of publisher, size and product.

• How can I determine the version UEFI implemented by the firmware of a PC?

  I found several ways to determine the version of the firmware/BIOS on a PC – for example mine is FRIEND v8.15 (05/02/2013).

  But is there anyway to determine which version of the UEFI is implemented by this firmware?

  I tried to find a description of the FRIEND v8.15 which maybe provided this information, but has not been successful.

  As a last resort, I considered as written to the company - but before that, any other ideas you have are appreciated.

  Hello

  Windows 7 doesn't support secure boot.  A lot of settings in the BIOS to do still get Windows 7 to boot UEFI mode as well as the support of compatibility (CSM) model in the BIOS offers the correct BIOS options.

  Frankly, I wouldn't buy a W7 PC delivered these days here as W10 is a great OS. If you have an application that proved not to be compatible with W10 then run it in compatibility mode.

  I've not seen many cases where different levels of BIOS are available for W7 or W8 and W10.  However, you might find instances where the BIOS runs only in UEFI mode.

• Script to determine the versions of ESX hosts

  Hi all

  I ran a few basic using Power CLi reports & a few gui based ones, but im findning it is difficult to determine the versions of the host. That is to say, I have some hosts ESX and ESXi on the same number of version 4.0.0 is there a way to filter hosts that are running on ESX as im going through a process of upgrading all hosts to ESXi 4.1.

  Thanks in advance.

  Yes, use

  Get-VMHost | Select Name,@{N="Product; E={$_. Extensiondata.Config.Product.Name}}

• How to determine the Version of the Oracle Identity Manager server?

  Friends,
  I have two questions about Identity Manager...?
  
  How to determine the Version of the OIM 11 g Server?
  How to determine the Version of the Server 9 IOM?
  
  
  
  Thank you

  The bundle of plates are observable by build number. If you go to metalink and check the patch bundle, there is a build number associated with them, usually also contained in the xellerate/config/Version.props file. What is written in XSD table during patching. Once installed, there is no identifier that says "applied BPXXX.

  -Kevin

• How do I programmatically determine the version OMIVV

  How can I programmatically retrieve the version of OMIVV (OpenManage for VMware vCenter integration)?

  That's how I do it manually
  1. connect to https://
  2. in the left menu, select the DEVICE MANAGEMENT
  3 version is displayed under the DEVICE UPDATE

  There is no url in the hyperlink for the management of the unit. This is a javascript action.
  I prefer not to have to hack all the javascript and html to find the source of the information, as this could easily change in a future version, this hack of rendering obsolete.

  There is no SNMP agent
  You can't SSH to the IMO

  I would like to write a script to collect this information on a regular basis as part of the State of my management of environment report.

  Hello

  There is not a way to side plugin to collect the version. You may be able to use other methods of Vcenter for version. PowerCLI should be able to get a list or the specific version of the plugin with the Get-vCenterPlugin command

  https://my.VMware.com/Web/VMware/details?downloadGroup=PCLI550&ProductID=352

• How to determine the version of ESXi

  Question:

  My vSphere client shows the ESXi host and 5.0.0 - < build number > - standard. If it's version, "U1" would be the U1 identifier in the summary, Image profile window general tab: value?

  I can very well be just looking at the answer but need a boost.

  Thanks, Patrick

  The following article has correlated the version numbers version ESX (i):

  Correlation of vCenter Server and ESX ESXi host version numbers for update levels (1014508)

• Determine the version of Windows product key on the back "bricks" Lenovo laptop

  I bought a used Lenovo 6459CTO laptop. The sticker on the back windows is partially readable and windows was preinstalled, when the laptop was purchased. The system has failed and attempts to reinstall an image by the previous owner allowed to corrupt the Lenovo recovery Partition, so I can't boot up the laptop. I don't have the recovery disks. How can I determine what version of windows is on the laptop using the product key? The version of windows on the label is unreadable.

  You must contact the Lenovo Support and ask for help.  Please see: How to replace Microsoft software

• Compile the version not updated in .jad

  When I manually update the version number on the properties of the project and then compile it, I must then manually regenerate the .alx files and manually change the .jad file because the version in the .jad file has not been updated by the compiler.

  It's crazy, it should be updated by the JDE without intervention.  What are others doing?  I have to love manually generate this thing myself?

  Is more NetBeans or Eclipse like MS VS?  Maybe I need to look really try to install one of those with the JDE being so primitive.

  Hi Berrysoft,

  You can consider the passage using NetBeans or Eclipse. Both offer a pretty familiar if you are familiar with MS VS.

  Personally, we use a build configuration that consists of Eclipse + bb-ant-tools and have found this to be a very productive Setup. In addition, Jonathan Fisher has put together a good guide on how you can get a setup of the environment productive build using NetBeans. If you use bb-ant-tools you can write then also some additional Ant targets that will copy a file pre-written .alx files on in the output when the build directory. If you want to get fancy, you can even enjoy filtering Ant to automatically fill in details such as the name of the app, version number etc. If you have a generic build script that can be moved quickly to a project without additional configuration.

  Or, perhaps, you can even try using the plugin 'Eclipse'. At this point, I personally recommend steering clear of it until some features more are put in, but it's worth a shot.

  See you soon,.
  Neil.

  BBSmart.

• Determine the version of the OS product key

  It is:

  Can the version [XP, Vista, WIN7, WIN8} of the OS, not the type (as in 32-bit or 64-bit), determined by the product key and if so, where to enter this product key?]

  I arbitrarily chose WIN7 version.

  No, you will need to have the specific edition and version installation files to install and activate using the product key.

  If Windows 7 is already installed and you are sure it's the right edition:

  Click Start, right click on computer

  Click on properties

  Scroll to the bottom of the window

  Click on change product key

  Enter the new product key.

  Click Start, right click on computer

  Click on properties

  

  Scroll down to Windows activation.

  You will notice it displays a time until Activation but completed. The product ID also indicates that he uses a default key, it is only for the 30-day grace period allowed until you have to activate Windows 7.

  Click the change product key link

  

  Enter the product key located on the COA sticker that is located downstairs or (sometimes in the battery of your laptop), you can also find it at the top or the side if it's a desktop computer.  It looks something like the following:

  

  Proceed to enter the product key and click Next

  

  Wait while Windows is trying to activate.

  

  If all goes well, less than a minute, you should see this screen.

• Determine the Version number

  Hello

  In the JDE, we can define the version number applications (by going into properties, then on Version :), I was wondering if there is a way to determine version number of the application that you programmatically entered here?)  There are classes that allow you to do this?

  Thank you

  Solved please use

  ApplicationDescriptor.currentApplicationDescriptor () .getVersion)

• Determine the version of Orchestrator from code?

  Thanks to some environments inherited, that we support, we have several versions of Orchestrator running in our environment. We run a common code base for all versions, so our workflows are the same on all instances of Orchestrator, but sometimes we need to run slightly different code on different versions of Orchestrator.

  The question is, is there a way I can tell from Orchestrator which version is running? Right now we run a local "hostname" command to get the name of the server Orchestrator and our decisions around that, but I wanted to know if there was a more graceful way / Dynamics to determine which versions. Is there something in the API or any object script that I can use for this information?

  Thank you!

  A GET request to the REST API:

  / VCO/API/about

  Sample of the output from my device:

  JSON:

  {
      "version": "6.0.2.2707387 (6.0.2.2700137)",
      "build-number": "2707387",
      "build-date": "20150428-1104",
      "api-version": "5.5.2"
  }
  

  XML:

  
  
      2707387
      20150428-1104
      6.0.2.2707387 (6.0.2.2700137)
      5.5.2
  
  

• Determine the Version of InDesign (for equivalent javascript applescript)

  I have next to no knowledge of javascript, or where to go for help? I have an Applescript easy I want to convert it to javascript.

  For starters, anyone knows the equivalent following javascript code for this line of code:

  the version of the application 'com.adobe.InDesign' myVersion id value as string

  The other part of the script, I might be able to understand mine. Unless at some point given I have to find a PC user to provide the path to the folder 'en_US' of the InDesign preferences folder.

  With the help of a File.openDialog (); would get around not knowing the path hard-coded, but defeats the purpose and effectiveness of the script. I want the end user to be able to assign a shortcut to this script, which would open so all their files in InDesign library with a simple keyboard command.

  -Determine what version of InDesign, running as a string

  Tell application id "com.adobe.InDesign".

  activate

  the version of the application 'com.adobe.InDesign' myVersion id value as string

  -Display dialog myVersion

  If myVersion begins with '6' then

  myVersion set to "version 6.0".

  Otherwise, if myVersion begins with "7.0" then

  myVersion set to "Version 7.0".

  Otherwise, if myVersion begins with "7.5" then

  myVersion set to "Version 7.5.

  Otherwise, if myVersion begins with '8.' then

  myVersion set to "Version 8.0".

  Otherwise, if myVersion begins with '9.' then

  myVersion set to "Version 9.0.

  Otherwise, if myVersion begins with "10.0" then

  myVersion set to "version 10.0.

  Otherwise, if myVersion begins with "11.0" then

  myVersion set to "version 11.0.

  end if

  tell the end

  Tell application "Finder".

  Try

  the ((chemin d'accès àle dossier de l'utilisateur actuel en tant que texte Unicode) folder this_folder value & "Library: Preferences: Adobe InDesign:" & myVersion & ": en_US:Valpak_Libraries:")

  in case of error

  Tell application "SystemUIServer".

  activate

  display dialog "cannot find the VPLibraries file. Or maybe it's in the wrong place? "& return & return &" make sure all your libraries {files} reside in: "& return & return &" Admin > library > Preferences > Adobe InDesign > "& myVersion &" > en_US > Valpak_Libraries "buttons {"Cancel"} default button"Cancel"with icon stop

  tell the end

  try to end

  tell the end

  Set question to {'different'}

  Tell application id "com.adobe.InDesign".

  activate

  Repeat with i in this_folder

  Try

  i name the value theName

  If theName contains question then

  I opened

  end if

  try to end

  end repeat

  tell the end

  Hi Jeff,

  for ExtendScript (JavaScript), you can search for properties, values and functions etc.pp. here:

  Excellent documentation of DOM of Jongware. Go for chm files, if you want to search in offline mode:

  InDesign JavaScript help

  And by Gregor Fellenz DOM documentation:

  InDesign ExtendScript API (8.0)

  InDesign ExtendScript API (10.0)

  InDesign ExtendScript API (11.0)

  If you search for 'application', you'll notice, this is a 'version' "app" object property

  var myVersion = "version"+" "+parseFloat(app.version);
  alert(myVersion);
  

  No ifs and ifs remains necessary.

  Uwe

• How to determine the version of HP CIM?

  I wonder if anyone knows the command to determine what version of HP CIM runs on our ESXi servers?

  I don't have access to a multitude of HP at the present time, but you should be able to determine if and what version of suppliers CIM HP is installed by running

  esxcli list of vib software | less

  instead of "|" less"you can also try"| grep-i HP'or'| grep-i Hewlett'to the output of the filter.

  André