Develop more sophisticated methods of control enum

Similar Questions

• Change the elements of control Enum or ring gives weird dialogue

  Whenever I did a right click on a control Enum or ring on my FP and choose Edit items... I see the following image. It's almost as if I'm missing a dll or something that shows the info to change the Page Properties dialog box elements. Any ideas?

  

  Hey Ben,

  I use 8.6.1.  I ended up uninstalling LV altogether and put it back.  The question went, and all is well now.  I hope he doesn't because it would be a pain to have to reinstall every time LV.

  The repair, which I mentioned earlier has not fixed the problem.

  Thank you

• I use display spectral pitch to analyze changes people´s speech (for research purposes). I need the visuals of interesting changes to the basic blue line to document my results in the articles. It is a more sophisticated way to th

  I use display spectral pitch to analyze changes people´s speech (for research purposes). I need the visuals of interesting changes to the basic blue line to document my results in the articles. It has more sophisticated way to do than to take a screenshot? It is very short sequences consisting of a few words I need to visualize somehow on a scale of hertz.

  Hearing is not really adapted to the analysis of speech on a very basic level, I fear. He does not have analysis by Wavelet, or something like that and certainly won't break down whatever it is complex in its components. What you really need is a software dedicated at the end of the analysis of speech, and some of it is free - try this: Praat: doing Phonetics by computer

• I'm doing a more sophisticated slideshow.

  I'm doing a more sophisticated slideshow.  I saw where there is a collage of images and each picture individually floats and zoom to better than the main image of the screen.  Would like to know what program to use and if there are lessons that I could follow

  I use Photodex - ProShow Producer. Did a very good job; not too expensive. See: ProShow - the ultimate HD slideshow tool

  I am an independent and the relationship of Photodex producer. I'm sure there are many other programs, but I found this as one of the best.

• ORA-00338: 3 log thread 1 is more recent than the control file

  Hello
  
  I met the error ORA-00338 while performing the recovery of incomplete data:
  
  ORA-00283: cool cancelled due to errors
  ORA-00338: 3 log thread 1 is more recent than the control file
  ORA-00312: wire 3 1 online journal: "+ DG_REDO/dbase/onlinelog/group_3.267.814820795".
  Complete recovery manager.
  
  I made this recovery on oracle 10g, database of ASM.
  
  1. What are the possible causes of this error ORA-00338?
  
  2. This error occurs at the beginning of the media recovery, RMAN is applying logs archived. If RMAN does newspapers "Online REDO" after applying "archived" logs required for recovery or in front of them?
  
  3 rman is how this journal in line 3 is more recent than the control file? How can I me SNA of the journal online & file control in my environment?
  
  Here are some details related to checkpoint scn / change # info. I found in my environment:
  Before recovery:
  view
  v$ datafile: 642935
  v$ datafile_header: 642935
  v database $: 642935
  Journal of v$: 640956
  
  After the recovery fails (ORA 338 :()
  v$ datafile: 640917
  v$ datafile_header: 640056
  v$ database: 640906
  Journal of v$: 640906

  You could try the incomplete recovery has to do only the RESTORE DATABASE with RMAN.
  Then, using the SQLPLUS command line, issue a RECOVER database with the HELP of BACKUP CONTROLFILE until CANCEL. See which he records guests for and monitor messages in the alert.log

  Hemant K Collette

• If I develop a web page using control +, how can I make sure that the next page, I'll on that site will be in the extended mode, and the 1st page will always be extended mode when I get back to him? This is automatic in the Chrome browser.

  Currently, the pages always return to the small size. It's a hassle having to develop every time to make them legible for my blind eyes.

  Try the NoSquint add-on, it gives more control over the zoom options.

• Use hp 7 android on ubuntu 14.04 development more

  Hello

  I want to use my hp 7 more development android on ubuntu 14.04.

  When I plug it via usb, adb does not recognize the device (it is not listed with others after "adb devices-l").

  I think I need to add the seller details to etc/udev/rules.d/51-android.rules.

  Is this correct?  If so, what are the details?

  If this is not the case, how can I do this?

  Thank you very much (and sorry if it has been answered before--did make a search, could not find).

  Update: the operating system recognizes the device (it mounts, I can browse the directories through files etc.) - this cable etc. are fine. But access the device via adb etc does not work.

  device appears on lsusb: Bus 003 device 023: ID 03f0:6b1d Hewlett-Packard

  Update: tried to add the following line to 51 - android.rules, no joy:

  SUBSYSTEM is "usb", ATTR {idVendor} is '03f0', ATTR {idProduct} is "6b1d", MODE = "0600", OWNER = "xxxx".

  Update: seems to work with the following:

  SUBSYSTEM is "usb", ATTR {idVendor} is '03f0', ATTR {idProduct} is "6c1d", MODE = "0600", OWNER = "xxxx".

  Thanks Provost,

  But it works fine now - so I don't need to root this device use it to Android Development (as most of these devices, it can be used for development without rooting).  Changes made to the file are made on the machine of Ubuntu, not the Tablet from HP.

  Essentially, my post asked for confirmation of the details re the seller / product id for this HP Tablet - very appropriate for this forum and not something I expect replied on a Ubuntu forum.

  I'll mark the following as the reference solution.

  Add the following (with details appropriate owner) at /etc/udev/rules.d/51-android.rules in the ubuntu machine:

  SUBSYSTEM is "usb", ATTR {idVendor} is '03f0', ATTR {idProduct} is "6c1d", MODE = "0600", OWNER = "xxxx".

  Kind regards.

• by filling program or show / hide control enum or ring options

  Hey guys,.

  So my problem is that I have a list of songs I want to something like an enum or control of the ring, the user will have to click an option, and something will happen to each selection. the program will be a lot of pages where the enum/ring will be present and on each page the options available will be a relatively unique group of known values.

  basically options 1 to 6 are already known to exist.

  on page 1 the drop-down list displays options 1, 2, 3

  page 2 the drop down menu displays the options 2, 4, 5, 6

  ....

  each page will have a combination of options.

  also, this isn't random, im pulling the page and the list of items in the list from a database.

  Im trying to think of a good way to do it, my guess is my options are rings or enums but if theres another thing that I could use to generate lists like that at the time of execution I have no problem to looking into it. I was looking for using the channels property node to take the strings of the options of the database and filling of the control of the ring, but how can I keep the ring always associated with the appropriate string value? I could use the property value and string and just pre associate database of the appropriate digital value chains.

  I wonder if there is a better way to go about it.

  Thanks for any help

  I would use a ring as you change the list dynamically.  Then, you can use the property of [StringsAndValues] for each of them to fill their individual list.

• String error 42 - VI method for controls server Unflatten

  Try to use the VI-server method to save and retrieve values from control. Get a generic error 42 when using the name "minimum value" but the Vi works fine if you use a name "minimum values" conrol Vi clos can pass (using S1) between two control names to show that the error is in the difference in name. Is there a way to solve the problem or if another method to save and retrieve orders be used.

  Attached VI is in LV2010 sp1.

  Thanks for your help.

  One thing you can try is to disable the option "Convert EOL" functions to write to a file text and reading of text file.  As you save binary data as a string, you want to ensure that binary data is stored.  It may be better to use the binaries, instead of text files, because you are trying to save and load binary data.

  Chris M

• Method for controlling battery Microsoft acpi disables my battery on update.

  Hello

  
  I work with a Lenovo Y530 computer laptop (ab00216104). After a few years, the battery ceased to maintain a charge so I ordered a new third party like Lenovo temporarily stopped selling them. The new battery worked fine at first but, after a few minutes I get the message "battery plugged in, does not support" of the battery lower-left icon. It just stops charging the battery, but it will take place off the coast of the battery until it is unloaded. At first, I thought it was a bad battery however by many trial and error, I discovered the battery works fine. Let me explain.

  If I uninstall "control method battery compatible acpi Microsoft" in the Device Manager and reboot my computer with my card wireless off then the battery will work perfectly. It is not up to what I connect to the internet that it suddenly stops to load again. It is in the case once my computer is able to access to the internet and update of "control method battery compatible acpi Microsoft" that the problem occurs.

  As much, as I know there is no way to prevent it from updating once he establishes a connection and no way for "rolling back drivers" as long as this option is grayed out. I would be very happy any advice on this situation, thank you.

   

  Hello

  I suggest you to perform the following methods.

  Method 1:

  To enable or disable Windows Update driver manually on a single computer to research

  1. Click Start, right-click computer, and then click Properties.
  2. In the tasks list, click Advanced system settings.
  3. On the System Properties dialog box, click the hardware tab, and then click Windows Update driver settings.
  4. Select never check for drivers when I connect a device.
  5. Click OK twice, and then close the System dialog box.

  Method 2: install the latest drivers for chipset for laptop and the Coachman.

  If the problem persists, contact Lenovo support for assistance.

  Hope this helps!

• SE 8004B0CE of error: failed to add more websites to parental controls

  I follow all accounts on our office, including the parent (Administrator) account in the case where my wife or I forget to lock and one of the teenage boys gets parental control.  However, it is causing a bit of a headache for us now, as my wife looked at quite a few clothes that Family Safety think should be blocked (some of the... uh... slinky unmentionable elements are blocked it is understandable), more some sites that Family Safety (read: Microsoft) interpreter evil to be 'dangerous' or something (the websites of archery?  hunting forums?  merchants of the arc/hunting archery who have pictures of hunting knives... seriously?).  Because of my wife and my navigation, my wife got an error message when you search for a new swimsuit for summer.  She tried to leave the images, but Family Safety still blocked them saying:

  "You have added the maximum number of Web sites to the list.  To add another Web site, first delete an existing one.   Error 8004B0CE ".

  However, by visiting the web site of family safety, I am unable to remove all websites either allowed or blocked list.  So... what the hell am I supposed to do?

  Hello

  Please answer a few questions to refine the question.

  1 are logged as an administrator to change the account of the safety of the family?
  2. what happens when you try to remove the elements allowed or blocked the site?
  3. do you receive any error messages?
  4. do you use Internet Explorer to access the Family Safety Web site?

  Make sure you sign in as an administrator when you go to the family safety account.

  We will update the family safety filter and check the results.

  Reference:

  How to update the family safety filter?
  http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-filter-FAQ?woldogcb=0

  Hope this information helps. Respond with more information so that we could help you more.

• What is better/more quick method to create a table (Oracle 11 g 2 dB)?

  Assuming that there are no statistics for the source tables - tables are deleted and recreated every day

  My paintings have a few million lines

  I'm trying to create a filled with data as quickly as possible via

  1 createtable_name as SELECT * from emp;

  2. create table_name

  Parallel degree 4

  in SELECT * from EMP ;

  
  

  I have 1 case I had some time 34 Sec

  In case 2, the table was created in 15 Sec

  
  

  In oracle other possibilities to create a much faster with this DEC?

  
  

  Or it will be faster when I create a table using create table_name

  (

  column1datatype [NULL |] NOT NULL],

  column2datatype [NULL |] NOT NULL],

  ...

  column_ndatatype [NULL |] NOT NULL]

  );

  or maybe I should use this method

  INSERT /*+ APPEND */ INTO empSELECT * FROM all_objects; 
  INSERT /*+ APPEND_VALUES */ INTO emp SELECT * FROM all_objects; 
  

  or it is better to simply creating a table

  and to use the FORALL in BULK IN THE COLLECTION instruction

  combination of Pentecost of the

  INSERT / * + APPEND * / INTO emp;

  
  

  I encourage you to test different options - as you did for the first two variants: personally, I think that it is much easier to remember these things if I did the tests myself - instead of trusting in the results of others. IE I don't think that there is something more fast parallelized ETG (perhaps with a clause (*)) additional nologging by using path direct inserts (although that INSERT APPEND select should do the same). I expect the operations in PL/SQL block to be slower.

  (*), but you should consider the consequences of NOLOGGING for your backup strategies + recovery

• Develop a Mode: why some controls do nothing

  I recently edited a 150 photos.  I noticed that some controls in develop mode when I do the settings have no effect. Sharpening is a good example. There is no change to the histogram (you can tell by the movement) or in the sample of the above image sharpening.  Changes to the chromatic aberration and noise reduction also no impact.  It depends on the camera, RAW files or what?  This isn't a complaint.  I'm just curious to know if my experience is universal (which I doubt because why would be Lightroom have orders) or the result of my camera, lens, the camera setting or choice of material.

  Thank you

  Jack Siegel

  You can view an image at 100% pixels display or higher to see the effects

  adjustments you listed. This is normal.

  Eric

  I recently edited a 150 photos.  I noticed that some controls in develop

  mode have no effect when I make adjustments. Sharpening is a good example.

  There is no change to the histogram (you can tell by the movement) or in the

  Swatch image above of sharpening.  Changes to the chromatic aberration and

  noise reduction no impact.  What is a function of the camera, RAW

  files, or what?  This isn't a complaint.  I'm just curious to know if my

  the experience is universal (which I doubt because why would be Lightroom have the)

  controls) or the result of my camera, lens, adjusting device or object

  choice.

• Autocommit DDL: difference between SQL and SQL Developer * more?

  I asked this in the SQL forum (commit auto DDL: difference between developer SQL and command-line client?), but it has suggested it might be a problem in SQL Developer, so I thought I would ask here.
  
  I'm trying to understand what exactly happens when an error occurs when a transaction is committed because of a DDL statement. I noticed that with SQL Developer, if the DDL statement CREATE TABLE, the statement is executed, even if the DML statements which I entered before CREATE TABLE violates a deferred constraint, so that the transaction fails. In SQL * Plus, it's not the case: the table is not created. I have no automatic validation. I'm using Oracle 10 g XE.
  
  That's what happens in SQL * more:

  SQL> create table table1(a number);
  
  Table created.
  
  SQL> alter table table1 add constraint table1_a_uq unique(a) deferrable initially deferred;
  
  Table altered.
  
  SQL> insert into table1 values(1);
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> insert into table1 values(1);
  
  1 row created.
  
  SQL> create table table2(b number);
  create table table2(b number)
  *
  ERROR at line 1:
  ORA-02091: transaction rolled back
  ORA-00001: unique constraint (BOEK.TABLE1_A_UQ) violated
  
  
  SQL> select * from table2;
  select * from table2
                *
  ERROR at line 1:
  ORA-00942: table or view does not exist

  If I put the same code in SQL Developer (versions 1.5.5 and 2.1.0.63), the table is created.
  This is my script:

  create table table1(a number);
  alter table table1 add constraint table1_a_uq unique(a) deferrable initially deferred;
  insert into table1 values(1);
  commit;
  insert into table1 values(1);
  create table table2(b number);
  select * from table2;

  And this is the output of SQL Developer:

  create table succeeded.
   alter table table1 succeeded.
  1 rows inserted
  commited
  1 rows inserted
  
  Error starting at line 9 in command:
  create table table2(b number)
  Error report:
  SQL Error: ORA-02091: transaction rolled back
  ORA-00001: unique constraint (BOEK.TABLE1_A_UQ) violated
  02091. 00000 -  "transaction rolled back"
  *Cause:    Also see error 2092. If the transaction is aborted at a remote
             site then you will only see 2091; if aborted at host then you will
             see 2092 and 2091.
  *Action:   Add rollback segment and retry the transaction.
  B                      
  ---------------------- 
  
  0 rows selected

  As you can see, the table is created in SQL Developer, but not in SQL * more.
  
  I wonder why it's different.

  Well Yes, it is a slightly different situation, because you issue 1 statement that executes internally 2 statements.
  But the problem is the same: the error handling. Where sqlplus rejects again (implicit) statements, sqldev goes ahead and runs them anyway. Personally, I'd say sqldev is more consistent and sqlplus is not, because run the following instructions (explicit).

  Kind regards
  K.

• Links methods and control action can be created dynamically?

  Hello
  
  I use JDeveloper 10.1.3.4 and have a .jspx like this page:
  

  200902 | 200906
  ----------------------------------------------------------------------
   
       Total Number of Students    12066  
     Students Already Validated    11482
               Validated Online      974
        Validated Traditionally    10508
     Students Not Yet Validated      584

  Statistics of five are five SELECT COUNT()... queries into five objects from view. These five different applications have one thing in common: a variable binding named SelectTerm. When you click on one of the links command on the menu bar, a method in the support bean is called to refresh the numbers on the page for the clicked half. In the bean to support code is like this:
  

  public void refreshSummaryStats(String term) {
      ...
  
      studentsTotal.setNamedWhereClauseParam("SelectedTerm", term);
      studentsTotal.executeQuery();
          
      allValidatedTotal.setNamedWhereClauseParam("SelectedTerm", term);
      allValidatedTotal.executeQuery();
  
      //three more VO queries to execute.
      ...
  }
  
  public String commandLink1_action() {
      refreshSummaryStats("200902");
      return null;
  }
  
  public String commandLink2_action() {
      refreshSummaryStats("200906");
      return null;
  }

  The problem I have is that the number of links on the menu bar of the order is not known. It may be from one to three based on the data from another table. This table (WORDS) and the query like this:
  

  TERM    AVAILABLE  SWITCHED
  ------  ---------  --------
  200809  N          OFF
  200902  Y          ON
  200906  Y          ON
  200909  Y          ON
  
  SELECT Terms.TERM
  FROM TERMS Terms
  WHERE AVAILABLE = 'Y' AND SWITCHED = 'ON'

  The data in the table CONDITIONS will change. SQL and the data above, three conditions will be selected, that's why dynamically three order links (200902 | 200906 | 200909) must be created on the menu bar, and action three methods should be created which will call refreshSummaryStats(), passage of different arguments. Is this possible? And how?
  
  If this isn't right, or not the best approach, are there other ways to meet the obligation?
  
  Thank you very much for help!
  
  
  Newman