Develop options for change with different presets

Similar Questions

• Why the server in the configuration of the e-mail option is disabled for change with El Capitan?

  When I start to use the mail, suddenly the server is changed and I can not change because that it is disabled (in gray).  What happens after instal El Capitan, when my Exchange account.  Is an Enterprise Server (mail.megasuper.com)

  I need to change, but is not able to change.

  What can I do?

  Thank you

  Omar Villamil

  In Mail preferences, accounts, go to the advanced for the account tab and uncheck automatically detect and manage account settings.

  You cannot deselect this option for Gmail accounts.

• script to save .pdf with different presets generates the file size low resolution wildly different interactive operation

  The script below is adapted in part from that has been with Illustrator and other pieces and the pieces that I picked up the Forum.  When I run it on a 15.3 Mg .ai file it produces

  . The same PFS size that would be the case if I manually created at Headquarters printing and by default; but the low-resolution sort option to 9 Mg as opposed to the 439 K he "should" be.

  Please someone be kind advise me how can I change the script to work as I want that: I had counted on my custom screening done the work for me.  Thank you in advance.

     var jiName=app.activeDocument.name
  
     var pos = jiName.indexOf(".ai"); 
        if (pos > 0){
            jiName=jiName.substr(0,(pos))  
        }
      var pos = jiName.indexOf(".pdf"); 
        if (pos > 0){
           jiName=jiName.substr(0,(pos)) 
        }
      
      var saveProof = new Window ("dialog", "Save Proof");
          saveProof.orientation="column"
          saveProof.alignChildren = "center";
          
    var sPGroup1 = saveProof.add ("group");
          sPGroup1.orientation="column"
          sPGroup1.add ("statictext", undefined, "File Name");
              
    var save_pdf = sPGroup1.add ('edittext {text:"", characters: 30, justify: "center", active: true}');
          save_pdf.text=jiName+".pdf"
          
    var sPdQButtonGroup = saveProof.add ("group");
          sPdQButtonGroup.alignment = "center"; 
          sPdQButtonGroup.alignChildren="row"
          sPdQButtonGroup.add ("statictext", undefined,"File Quality");
    var HQ=sPdQButtonGroup.add ("radiobutton", undefined, "  HI-RES  ");
    var IDefault=sPdQButtonGroup.add ("radiobutton", undefined, "  Standard  ");
    var lowres=sPdQButtonGroup.add ("radiobutton", undefined, "  low-res  ");
          sPdQButtonGroup.children[1].value = false;
          sPdQButtonGroup.children[3].value = false;
          sPdQButtonGroup.children[2].value = true;
          sPdQButtonGroup.active=true;
          sPdQButtonGroup.visible=true;
          
    var sPButtonGroup = saveProof.add ("group");
          sPButtonGroup.alignment = "center"; 
          sPButtonGroup.alignChildren="row"      
              
    var sPok=sPButtonGroup.add ("button", undefined, "Save Proof");
    var sPcancel=sPButtonGroup.add ("button", undefined, "Exit");
          sPButtonGroup.active = true;
             
          sPcancel.onClick = function() {
             //sP_ok=false;
             saveProof.close();
                         }
          sPok.onClick = function() {
              
                app.executeMenuCommand('save'); // save existing Illustrator file
                
                var my_pdf= new File("users/Les/Desktop/PROOFS/"+save_pdf.text); //Full File Path 
                
                saveFileToPDF(my_pdf);
                            
                function saveFileToPDF(myFile){  
                //Setup Save Options for PDF  
                var saveOpts = new PDFSaveOptions();  
                saveOpts.compatibility = PDFCompatibility.ACROBAT6;
                saveOpts.generateThumbnails = true;  
                saveOpts.preserveEditability = true;
                saveOpts.requirePermissionPassword = true;  
                saveOpts.permissionPassword = "*-*-*-*-*-*";
                saveOpts.compressArt = true; //default
               saveOpts.embedICCProfile = true;
               saveOpts.enablePlainText = true;
               saveOpts.generateThumbnails = true; // default
               saveOpts.optimization = true;
               saveOpts.pageInformation = true;
                
                if (HQ.value==true){
                  saveOpts.pDFPreset = '[High Quality Print]';
                }
            
                if (IDefault.value==true){
                  saveOpts.pDFPreset = '[Illustrator Default]';
                }
            
                if (lowres.value==true){
                  saveOpts.compatibility = PDFCompatibility.ACROBAT4;
                  saveOpts.pDFPreset = 'Smallest File Size v4';
                }
            
                //  
                var originalInteractionLevel = userInteractionLevel;        //save the current user interaction level  
                app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;      //Set user interaction level to suppress alerts  
                app.activeDocument.saveAs(myFile,saveOpts);        //Save File  
                userInteractionLevel = originalInteractionLevel;        //Set user interaction level back to original settings 
                              }
                          
                saveProof.close();
                
          }
              
    saveProof.active=true
    saveProof.show()
  
    
  
  

  Oh, please check that: ' "saveOpts.preserveEditability = true;".

  Maybe try to disable this option.

• XControls: Options for change "Unique identifier" and the "localized name Long' properties has disappeared

  Is it only me or is a new bug in LabView? Miss me the options to change the "Unique identifier" and the "Long name" real estate XControl. In the past they where in the red zone, now they're gone!

  I use LV2009SP1.

  Any ideas?

  Ingo Bartsch

  

  Thanks for your efforts, Duffy2007!

  Problem was a corrupted in some sort of XControl or project file. After re - import the XControl in a new project, all was well again.

  Kind regards

  Ingo

• No option for 'Sync with Lightroom on mobile '.

  I'm setting up a Collection that syncs with LR on Mobile. When I "Create a Collection", I don't have an option to "sync with Lightroom on mobile." What setting I'm missing to make this option appear?

  You have Lightroom CC or Lightroom 6? CC is required to use Lightroom for Mobile.

  Then, if you have CC in Lightroom, you must first click the identity plate (upper left) and chose to start where it says Sync with mobile Lightroom.

• BBM BBM has changed with different phones

  If I log in with the same ID of BBM BBM in another phone, the BBM PIN code will be changed by itself,

  As I connect to bbm in the pad, there is a new PIN on the keypad,

  But the contact person are still there,

  How to solve this problem?

  As I said before, this is normal.

  If you connect to BBM on a new device, the device will be assigned a different axis, then the last device had.

  What you describe is normal behavior for BBID.

• How to add the mask into effect reference is Options for Composition with after effects CC 2014?

  The main reason why I'm updating my After Effects with cc 2014 is "composition for each effect options, including the ability to limit the area affected by each of the effects with masks". This useful feature really simplify my work. But now I realize that I want to use the script function.

  I get Composition Options the effect name and matchName.It looks like this:

  Name	Name	Name	Name	propertyValueType	Remove
  Composition options				undefined	ADBE effect built in Params
  	Masks			undefined	Effect ADBE Mask Parade
  		Reference mask 1		undefined	ADBE effect mask
  			Reference mask 1	MASK_INDEX	Flow path ADBE effect Ref
  	Opacity of the effect			OneD	ADBE mask opacity

  I try to use .canAddProperty ("ADBE effect mask") and .canAddProperty ("ADBE Path flow Ref effect"). However, it returns false.

  I found that add or delete this property in the user interface are the buttons '+' and '-', so maybe I can use app.executeCommand (app.findMenuCommandId (theCommand)); However, I can't find that button name because it does not have a helpTips to remind me of the name.

  So how do you add the mask with script reference? Or ESTK has no permissions to access this useful property so far? I have not found anything on the Internet.

  Moreover, I have an another two quick questions:

  1. If there is more than two masks in a layer, remove for each mask is the same ("ADBE Mask Parade") ("ADBE Mask Atom"). How can I use the Remove to get the second mask such as the name property? First I treat like a table, but ("ADBE Mask Parade") ("ADBE Mask Atom') [index] actually did not work, so that ("ADBE Mask Parade") (" ADBE Mask Atom'") (index) is referring to the child property altogether in the first mask. I have no idea about it.

  2. when I use the method property() with script, property ('effect'), and property("effect") are all the two ok. The only difference in the method is the single quotes ' and the Quotation brands "." I just want to know if the "and" have any difference in the method property (), except that "this color is blue" and "this color is purple" in ESTK.

  The advice and the answer would be appreciated.

  Yes you can add masks to the effects by script.

  If "fx" is a fx on a layer:

  var fx.compositingOption = co;                                  or fx.property ("ADBE effect Built In Params')

  var fxMasks = co.mask;                                            or co.property ("ADBE mask Parade"): INDEXED_GROUP j

  fxMasks.canAddproperty ("ADBE effect mask");    true

  var fxMask = fxMasks.addproperty ("" ADBE effect mask");

  fxMask.maskReference.setValue (1);                        or fxMask.property ("ADBE effect way Brook Ref") .setValue (1);

  If you can do short

  fx.compositingOption.mask.addProperty("ADBE Effect Mask").maskReference.setValue(1);
  

  Xavier.

• Adapter for laptop with different rated voltage

  Dear community,

  I had been using an old laptop Compaq Presario V3000. Now the laptop adapter went wrong past and need to replace the same.

  So I went to a store near HP who sold me an adapter, but after his return and comparing with the original adapter, I found had a different voltage than the original rating. I confronted the HP Store with the facts, I was told that the adapter with the old notation are not more available and new adapter will be perfectly well that both cards have the same nominal power.

  The side of the cards original and news are as follows:

  Adapter supplied originally with laptop: 18.5V - 3. 5A / 65W

  Sides of new card is now provided by HP Store: 19.5V - 3.33 A / 65W

  Please suggest if I can use the new adapter or not and if not, then what should I do?

  Thanks and greetings

  Nitin

  Hello

  The gap is 5%, should be allowed to use.

  Kind regards.

• What are the official Adobe Creative cloud support Options for customers with problems?

  I expect to be able to use the new applications Adobe CC 2014 after seeing the ad, but I don't know that my CC to CC 2014 synchronization problems can be solved through a community forum.

  What are the other options? Is there a Support Adobe phone number should I call? Or should I create a ticket by submitting a form to a support plan?

  I understand, there is currently an overload of support since the recent release issues, but what is the way to get a quick response from Adobe?

  http://helpx.Adobe.com/Adobe-Connect/Adobe-Connect-phone-numbers.html

  or

  Coordinates of Adobe - http://helpx.adobe.com/contact.html can help

• Wireless Internet for PC with HDR-AS15

  Hello

  Just unpacked my new Action Cam. I can connect using my wireless PC card, but I don't seem to be able to access the memory card. Is there some guidance on how to do it.

  Are there plans to develop software for PC with the same feature Wifi like a smartphone? REC remote, streaming, etc...

  Concerning

  Arne

  If you want to view the files in your memory card, you must use the USB cable supplied in the connection of the cam of action directly on your computer. We cannot view the contents of the memory card on your computer via Wi-Fi.

  You can use the features WiFi cam action to transfer images on your smartphone and to control the cam of action via your smartphone. At the time of writing, there is no software available but that will allow us to perform similar functionality on a computer. We do not have information on whether there will be a software that is developed for this purpose.

  If this post answered your question, please mark "accept as a Solution.

• When I change the Option for the Applications of Document Adobe, Firefox always manages documents in a different way.

  I changed my Options ask me each time I want to do with a pdf document. It does not work. What happens each time I click on a PDF as an attachment in e-mail or on a Web site, is that a Windows Explorer window asks me where I want to save the file. I don't want to save it, just open. I had always presented a selection of Firefox in the past, but the box Firefox offering options for me is no longer appears. I tried to change my Options/Applications in different ways, but the practice seems so have no effect at all. I'm using Firefox 27.0.1 on a Windows 7 operating system.

  Hello, to change the options for a PDF file, go to firefox > options > applications and scroll down and set the default action for the portable document (pdf) format.

  How to disable the built-in PDF Viewer and use another Viewer

• Is it possible to create a subscription with different options for blog, newsletter, product announcements, training, etc.?

  I would like to create a registration page for my Muse site with different subscription choices, but I don't know if it's possible or, if this is how I build. Any ideas?

  Hello

  This is possible since the end of the hosting platform. If you are using Business Catalyst to host your website, you can use events, campaign of subscriptions module, attach the subscriptions etc. of the area.

  You can create events/announcements on end of BC and then add the module in the Muse page which on post will show the modules on the page.

  Thank you

  Sanjit

• Lighroom 6.1 develop vs vs library export colors change with the GPU acceleration

  Having managed to obtain the execution of acceleration GPU (with AMD Radeon 6800 on Windows 7) subsequently, I make a radical change in color between the library and develop modules.  The develop module shows a really cool picture.  This can be 'activated' on and outside by disabling GPU acceleration.  The library files and anyexported show a warmer image in comparison.

  How can I fix it?  Anyone has any ideas - I had to disable the GPU at the moment... again...

  Library and develop are color management and use the profile.  But they use it in different ways with different code (for example develop uses the GPU is not the case of library), so incompatibilities in the risk profile of stumbling one but not the other.

• Watch is now no paired phone. The watch displays now wrong password, which must be changed on the phone.  However, given that the watch is more matched with the phone, I can't the available option to change the password.  Help please!

  I have a watch that has become not matched with the iPhone with it's Setup.  It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again.  However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked.  This is my boss's phone... Help, please!

  If you have forgotten the password for your Apple Watch - Apple...

  < edited by hosts >

• How to structure the DMA buffer for SMU 6341 DAQ card for analog output with different frequencies on each channel

  I use the outgoing/incoming analog DDK with the DAQ 6341 SMU map.

  The examples, for example aoex5, show a single timer (method outTimerHelper::loadUI), but the example shows the DMA loaded with same size of vector data.

  There is a comment in the outTimerHelper:call rogramUpdateCount, which implies that memory sizes different pad per channel can be used.

  (the comment is: switching between the sizes of the various buffers is not used)

  Nobody knows what should be the format the DMA buffer for data from multiple channels with different frequencies?

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  Hello Kenstern,

  Data are always intertwined since each card has only a single timing for each subsystem engine.

  To AO, you must specify the number of samples that will be released to the AO. You also specify the number of channels. Because he didn't is that a single engine timing for AO, each AO will be channel will be updated at the same time to update clock tick. Data will be interlaced exactly as shown in the example because each channel AO needs output at each tick of the clock to update. The data itself can change depending on the frequency you want to copy.

  kenstern wrote:

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  In your example, you must come with an update rate that works for the two waveforms (sine waves of 1 and 1.5 KHz). To get a good representation of a sine wave, you need to update more than 10 x faster than your fastest frequency... I would recommend x 100 if possible.

  Update frequency: 150 KHz

  Channels: 2

  Then create you stamps that include complete cycles of each wave you want to produce based on the frequency of update. These buffers must also be of the same size.

  Buffer 1: Contains data for the sine wave of 1 KHz, 300 points 2 cycles of sine wave

  Buffer 2: Contains data for the sine wave of 1.5 KHz, 300 points, 3 cycles of sine wave

  You can Interleave them as before. When the data are performed through the ADC, they are out different sine waves, even if the AO channels are updated at the same speed.