Development of contactless cards - to start

Similar Questions

• How to start the development of java card?

  Good evening everyone,
  
  I am a novice for the development of java card, last few days I'm studying java card and terms related to it, now, I have some knowledge about applets and API. I read on the map of java 2 and 3, I think that I moved to map java 2 is why I download jcdk 2.1.
  
  Now, I want to do something in development rather than further the conceptual study. Frankly speaking I m confused where to go because different sites have a different point of view, if I want to run my knowledge I got last few days...
  So I want to ask
  1. what IDE would be preferable for the development of java card? {eclipse net or beans or whatever}
  2 that is what I would be required during the java card application? {version of the java sdk? jcdk version? ocf? or what}
  3 - at first, I want to use the simulation technique to test what I've done and how its work, then for what tool or IDE would best work for me.
  kindly ask you to guide me and show me the path where I can move and do what I want...
  ---------------------------------------------------------------------------------------------------Thank you in advance------------------------------------------
  
  Published by: 911936 on February 2, 2012 10:01

  Hello

  You must find it in previous discussions. There are a lot of discussions there in which similar questions answered.

  Concerning
  Umer

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• SQL Developer 4.1 freeze when start

  When I start my SQL Developer, it is the freezing of the situation of loading.

  • You use the SQL Developer version: 4.1
  • The version of the JDK you are using: 8u45
  • You use the operating system: Windows 7
  • The version of Oracle you are connected to: 11g 2

  I solved the problem AppData files ( \AppData\Roaming\SQL Developer and \AppData\Roaming\sqldeveloper ).

• Unable to see the role of "Developer of Applications Oracle Fusion" starting up

  Hi all
  
  Strange that I can't find the 'Developer of Applications Oracle Fusion' role in the list of roles that arise at the start of my jdev. Anything I missed?
  
  Thank you
  Srini

  "Oracle Fusion Applications Developer", developer Oracle Fusion Applications customization are internal to the development of the Oracle. They are not available as part of the downloaded site OTN Jdeveloper.

• Mini Mac; Windows can be installed on the SDXC card to start and run windows

  I was wondering if I could install Windows 10 to the SDXC card slot and run the card SDXC of Windows?   I rarely use Windows and I would ' t need you worry too much space Mac.  I thought I could unplug the unit out of the machine most of the time, leaving the slot for use with other storage devices so that I do not use Windows.     My HARD drive is full & I thought it would be nice to have a Windows machine that would not take more space on my HARD drive.

  Mac Mini (late 2012) 2.5 GHz Intel Core i5 with 4 GB of memory running with OX El Capitan 10.11.1

  No, but you can try cloning once installed on the internal drive.

• VGA graphics card cannot start (Code 10) on Alienware M14x

  Recently, I deleted from my hard drive and reinstalled Windows 7 and now all my games (COD Black Ops, FSX, etc.) and other programs such as Google Earth are Mid-use freezing and I have to force to leave them via the Task Manager. There is a sign of warning next to the VGA adapter in the currency manager and I can not find suitable driver to install it with. This driver to I use to install the VGA graphic card? I tried everything from my M14x Resource CD to Microsoft and Dell downloads.

  System Specs:
  Alienware M14x R1 64-bit
  Windows 7 Home Premium
  Intel Core i5 - 2.40 GHz
  Intel HD Graphics 3000
  8 GB RAM
  750 GB hard drive
  Any suggestions?

  You are probably running on the integrated graphics card Intel HD3000.

  Generally drivers for laptop are all downloaded from the web site of the mfg, but sometimes drivers for graphics dedicated on laptops are downloaded from the mfg cards.

  I see that the four existing variants of the M14X using Nvidia GT650m, so if DELL does not include drivers for this card then use the Nvidia download below-
  Note that your M14X may use a different graphics card, so check that you have.

  NVIDIA Driver Downloads - advanced search

  No matter what the pilots are on the CD, you should check for newer versions
  on the DELL site, as the drivers on the CD are almost always up-to-date.

  If you have not done yet also get updates of Windows, but don't forget to
  block the updates of Windows to download and install the drivers.

  Also update DirectX - Download Details: DirectX end-user performance

  .

• HP Pavilion HPE - 515sc: new graphics card does not start

  When I change my graphic card, it starts not my monitor has the blue hp startup screen for 5 minutes and the computer shuts down

  @Storuu

  Yes, it works with a motherboard that has UEFI.  However, HP has their motherboards made to their specifications and is not the same as the commercial versions.  It is difficult to find a motherboard that has holes to match the accessory in the case.  In addition, the connectors in the case aren't always the same thing as retail motheboards.

• Windows, 3 beeps and new graphics card will not start

  Hello

  has obtained a HP p6-2105eo, windows 7. At a radeon HD 5670 graphics card that works very well. Bought a Gigabyte GeForce GTX650 2 GB. Can see screen start and seems it does not respond by clicking the Esc key. I hear 3 beeps with a delay of 20 to 30 seconds after each beep. After several minutes (2-3 minutes), the screen goes black with a command prompt flashes at the top of the screen on the left and nothing more.

  Think it might be damaged the card, so went to the store and got me a Gigabyte GeForce GTX660 OC 2 GB instead. The same problem.

  Also updated to the latest version of the available for my motherboard BIOS to: 2012-08-14, Version7.16 Rev A, 2.87 M

  Also already replaced at a 700W PSU, so that it can handle the best graphics cards.

  So, what could the problem with the recent graphics cards in this office?

  After numerous tests, such as reset cmos, bios reset, outside and inside with battery and so on... Nothing solved.

  Re-tested with the old graphics card and started immediately.

  After intensive research on Google, the BIOS is probably still too old to the new graphics card.

  Yesterday, I replaced the motherboard and the problem disappeared. Works fine now with the new card.

  Will use the older motherboard in an old computer instead, it isn't a total waste to replace.

• Start developing BlackBerry applications

  Hello friends,

  I know J2ME development.

  I'll start development in BB, so I am a beginner in BB

  I want to do great financial app in Sib. but I am a beginner,

  So, I just want to know where I get a basic idea & study of source code for BB.

  then I can move quickly in the development of BB

  Please suggest me a website or forum.

  Thank you

  Neel

  You can use as many instances screen you want, it's ok

• Help blackBerry Smartphones! Bold 9700 is frozen on start up with the new sim card

  I tried looking for similar topics but could not find more relevant. everyone seems to have no problem with swapping of cards sim on their fat. If there is a thread already open, I'm sorry. I am really frustrated and really need my blackberry to be operational.

  I have a Bold 9700, updated to the latest OS, everything works fine. I recently had some problems with my old sim card so I went to my service provider to change to another (same number, same line, same contract, just a new sim card).

  As it is expected that I was told that when my old sim is disabled, simply insert my new and I use my phone as normal.

  However, when I did this, the phone was stuck at the loading screen (the bar is all white) for eternity (maybe 5 minutes or more) before moving on to the home screen. There is no charge "security check" bar, the phone is completely frozen, no buttons work, the touch pad does not work, it shows 3G top right without the sign of blackberry, there is no service provider name and from time to time the little loading logo clock is displayed.

  I pulled the battery a couple of times and the problem persists. I called the service provider to reactivate the new sim card, they did 3 times, same problem. I inserted the SIM in other non-blackberry phones that I have and it works on all phones. When I put my old sim card in the 9700 disabled, the phone start end in 2-3 minutes, 'check' safety bar according to normal, everything moves, just no connection to the service. When I turn on the phone without sim card it starts fine with a message to say out loud the card sim.

  I even went down to the assistance service technique blackberry from my service provider and they were no help. all they could say was 'we must wipe your phone and reload the software' that I'm trying to avoid, and I can do it myself anyway.

  My phone is unlocked, comes unlocked here in Singapore, I even checked using the method 'MEPD', all disabled.

  This was very frustrating, especially when I need my blackberry for work. What is the problem with my phone? How can the simple replacement of a sim card if difficult on a blackberry when there is problem free for ANY other phone I've ever used? I am now fear when I travel abroad for business and requires a foreign sim card.

  had the same problem and eventually happeing is that I had to reload my os permeable, and then insert the sim card and upgrade again.

  consusming time, but worth it

• Develop/card model disabled when the update of Lightroom to disk

  Hello

  I had a disc for Lightroom 5.2 and entered the product key after instillation.  However, when updating to 5.7 models of development and the card becomes disabled and it says that I need to renew my membership.  I have regestered my product key to Adobe.com and re-installed, but the error persists.  I am not able to upgrade my Lightroom, even though I own a disk with the program?

  Has anyone working on this issue before or familiar with what's going on?

  Thank you

  Michael

  Uninstall your lr.

  Use the link for dl lr 5.7.1 and install it using your password below.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• BB maps is paralyzed by ATT, all other cards that I can call him by program on "BOLD"?

  I inserted a MenuItem "display the location of the sender" display Email menu. I hope that when a user opens an e-mail and selects the location of the sender 'show' in the menu, it will bring BB maps and show the current location of the sender.

  However, BB maps did not appear and then I've debugged it on the "BOLD" device. (Define criteria and get an instance of LocationProvider) went well until it reached LocationProvider.getLocation(-1).

  Here is the code segment:

  System.out.println ("view our locations');

  try {

  location = provider.getLocation(-1);

  System.out.println ("get location");

  ..........

  } catch

  (LocationException e) {

  System.out.println ("could not get (LocationException) location:"+ try () ") ;}

  catch (InterruptedException e) {

  System.out.println ("could not get the (InterruptedException) location:"+ try () ");

  }

  Only 'show the locations' has been printed, but 'get location' has never printed. Feels like the thread stopped at the place = provider.getLocation(-1) and never returned.

  I've read a lot of online messages and seems ATT disabled and hidden BB cards to promote the browser. The trick of using non Att theme not working anymore. Several people have complained that their BB icon cards disappeared at the end of March 2009.

  That's why cards BB no-show in my application? Is there a way to fix this?

  Thank you

  Hua

  LWG is OK - BB Maps has nothing to do with LocationProvider.

  However, you can start programmtically than Google maps if installed, using the ApplicationManager interface. O check for both and prefer BB Maps, but allow the customer to select Google given that some people prefer.

  See this thread on the BB Forum a tip on this:

  http://www.BlackBerryForums.com/developer-forum/143263-heres-how-start-Google-maps-landmark.html

• Problem starting with HP Pavilion a6500f

  Hello

  I have a problem with my computer since the beginning. When I start the computer freezes and beep long time (a long and three short films I think)... I have to stop and restart the computer... will launch after five or six restart...

  I would like to know if there is an update to the bios or something... my bios version is the 5.17

  The motherboard is this: Foxconn MCP73M01H1

  Thank you

  Try reinstalling the memory and remove the video card. Start the computer by using the quantity of memory on-board and see what happens.

• Pavilion p7 - 1207c: upgrade video card on Pavilion p7 - 1207c

  Hello

  I am wanting to upgrade the integrated graphics card that came with my computer to a GeForce GT 730.

  I already have the card and was plugged into my PCIe x 16 slot and see the fan turns, but neither my BIOS or Windows sees a card plugged into this niche.

  I go into the BIOS to see if I had to activate the crack, but the only option I see is to disable or enable security on the slot. It has already been set to disabled.

  I am at a loss to know recognized, and if more info is needed I am happy to provide.

  Your desktop computer motherboard is pre-UEFI. This means that a video card with a vBIOS EFI will not work.

  Return the video card and find one that allows switching between legacy vBIOS and EFI BIOS. A video card with a legacy vBIOS will also work.

  Check out Sapphire Technology graphics cards. They made a number of card games that have a dual video BIOS that allows switching between UEFI or legacy vBIOS.

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  You can check that by the removal of the video card and starting the Windows machine.  In the search box type in MSINFO. Who calls on system information. Take a look down the list to find the subject that says BIOS mode. to the right you will see what type of BIOS of your motherboard has.

  The following image of sysinfo is desktop DIY that I'm typing this.