device ATAPI dvd w dh16w1p ata

Similar Questions

• Drive CD-ROM/DVD-ROM of ATAPI DVD W DH16W1P ATA will not register in Vista

  I use Windows Vista.  I had a problem with the CD-ROM/DVD-ROM drive.  It will not save and it will give me information "invalid MS-DOS...". "in a dialog box.

  The drive is an ATAPI DVD W DH16W1P ATA Device.

  Y at - it a virus?  I installed Norton 360 2010.  Cleaning the registry would have something to do with this problem?

  * original title - my CD-ROM/DVD-ROM drives will not save the files *.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Registry damaged during the removal of Nero 7. Lost ATAPI DVD w DH16W1P ATA

  I upgraded from Vista to Windows 7 Home Premium and started having error which notify msg InCD did not start.
  I removed Nero 7 and the changed error advising that there was a corrupt DLL from the Nero 7, also access to my DVD
  go the... I system restored to the date of the upgrade and the DVD returned with the original error.
  I reinstalled Nero to see if a new facility would fix the fault and once again the DVD dissappeared. This time I was unable to restore. Reinstall the driver of DVD successfully, but now I get a msg saying fpackage of installation failed due to a corrupted registry. Please can someone advise how can I do to regain the use of my DVD player.
  Unfortunately, I couldn't find a way to work around the error so I had to wipe the drive completely and install Windows 7 from scratch, completely.
  I resisted the reinstallation of Nero 7.
  No more problems but a great lesson for me... Thanks for the reply.

  Nero 7 is compatible with windows 7?
  Look in the Nero 7 Compatibility Center?
  You can also uninstall nero 7 completely from the computer and check if that helps
  You can also run the nero clean tool and check: http://www.nero.com/enu/tools-utilities.html#tab4

  It could be that useful ;)

• I can't burn DVDs on my ATAPI DVD A DH20A4P ATA device.

  Hello
  I have ATAPI DVD A DH20A4P ATA Device
  Try to burn files to DVD but does not work.
  The DVD device works properly with disks already complete, but it can not simply burn on a blank also tried and with different burning software.
  Is pop - ing that the disk in my DVD drive is not registrable or that the disk is not found - depend on the program, I used.
  Used Nero InfoTool and it found my driver as recordable
  Tried with all the common ways of fixing as uninstalling the driver and let Windows to find it.
  Then I finally found the Microsoft article that has been the solution for many people with the same problem,
  so I was going to give it a try too, but it turns out does not work for me, the article is this one:
   http://support.Microsoft.com/kb/31652
  But is does not help me in step 2:
  "In the right-hand side of the Registry Editor window, double-click Drive Type. .
  In the value data box, type 1, if the drive is a CD - R drive or 2 if it is a CD - RW drive.

  Click OK and then close the registry editor"
  In my registry is like this:
  (Default)                                          REG_SZ (value not set)

  0x000053f7 REG_DWORD Type player (21459)

  (Database 53f7 - hexadecimal value)

  IsImapiDataBurnSupported REG_DWORD 0x00000001 (1)

  (Database 1 - hexadecimal value)

  Is there a way to solve this problem with burn ?

  Title of the Moose: cannot burn to DVD

  Thank you for your help, I found that the problem came from the Windows Vista itself, it was on windows which caused the drivers to do not read blank DVDs.

• Code 19 cd dvd not working not not with Windows Vista Business-failure to load the software driver for ATAPI DVD A DH16A6S ATA Device...

  Barely noticed as useless before using the dvd on this machine cd - error code indicates... .Configuration (in the registry) is incomplete or damaged. (Code 19)

  Having read the other answers and the last similar validation seems to be dated to April 2010 of anything else because it please?

  I tried Driver Update and reinstall... .rebooting and then on the line ' difficulty his "all so far nothing works.  What is the latest information about this problem - can any that provide extra help or guide me for more relevant prior display and the best way to proceed. Failed to load software driver for ATAPI DVD A DH16A6S ATA Device...

  Mr. Fix it's obviously gone vacationing insofar as this problem is concerned... Cheers for any help.

  Hello

  Norton is known to cause slow downs and other issues. Uninstall and then running
  the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
  Use the recommendations below when testing, even better would be permanently.

  Norton Removal Tool
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  =================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• MEDIA IN CD/DVD DRIVE IS NOT READABLE (ATAPI DVD A DH16AYH ATA DEVICE) IS IN THE DRIVE OR THE MEDIA FORMAT IS NOT SUPPORTED

  I recently had to change the map media on my pc and now I can't get the cd player to read any CD or DVD, now I get this message when I run the troubleshooter of hardware and devices "MEDIA IN the READER of CD/DVD IS NOT PLAYS (ATAPI DVD A DH16AYH ATA DEVICE) THE DISC IS EMPTY OR THE MEDIA FORMAT IS NOT SUPPORTED" I have windows vista.
  Thank you

  Hi Euro Italia stone,

  Thank you for your message.

  What is the make and model of the press you card changed?

  You can try the DVD drive in another computer to see if it's a failure?

  What is your computer make and model?

  I suggest you check the cables connected to the training to see if they are loose.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to recharge a device ATAPI DVD driver?

  Original title: HOW can I RELOAD an ATAPI DVD a DH16A3S DRIVER of DEVICE?

  Somehow my device driver disappeared in my system.  Where can I find ATAPI DVD A DH16A3S ATA DEVICE DRIVER?

  Hi SandraAnderson,

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  I hope this helps.

• ATAPI DVD A DH16AYH ATA Device read DVD but not CD

  Engraver of CD/DVD in Compaq Presario 5010NX w / VistaBasic read any DVD but has problems with CD if I insert a music CD, sometimes it will open right and I can play music. Most of the time he just tells me to "insert a disc", usually open the status bar, but not always. If I close the drawer [or eject and close the tray] from 3 to 15 times, he finally opens the CD. Generally. Sometimes I drop and open it on my old computer Millennium, [which never fails to open the CD].  I bought a cleaning disc, but it still happens. Also, it stopped opening the tray with the manual key (1,200 works tent) and will always open with 'Eject' of the computer, but only with DVD and sometimes will open with the "eject" computer with the CD never if it is empty, so I always keep a known disc "opener" in the status bar. (if I forgot, I use a paper clip)

  I did an online search of the Device Manager for a driver update and he told me that the best software is already installed. I just need a new burner? Why is - that it will work with DVD CD not? driving me crazy. Thank you ps can not find a burner mfgr. says simply "drive SuperMulti DVD with Lightscribe" - pps I tried uninstalling the Device Manager, and then restart the computer - no change.  Haven't tried the support.microsoft.com/gp/cd_dvd_drive_problems diagnostic program no solution I came across a post from someone else who had the same problem [former position & 'uninstall & reboot' was the only suggestion on this one.]   I can't believe that it could be physical burner... why he wouldn't hesitate to read the DVD if it was a physical problem?  Help?

  Hello

  Check with Compaq Support, their drivers and documentation online and apply to the
  HP forums for known issues. Compaq can give you more information on the disk.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  ==================================================================

  Readers to use and this intermittent problem can be caused by wear.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Filter of device drivers are corrupt (ATAPI DVD A DH16A6S ATA Device)

  How can not solve this problem

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• ATAPI DVD A DH16A1L ATA

  HOLA,

  IN EL TITULO PONGO EL DRIVER NUMBER DON'T CON EL QUE TENGO PROBLEMAS Y NO COMO SE RESOLVERLOS. DECIR, MID DEVICE O NO LEE DVD CD ESPERO KNEW AMABLE AYUDA PARA RESOLVER EL PROBLEMA.

  SALUDOS

  PEPE

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page for answers click v (English) in the United States and set on your tongue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Carpet * a DVD 850 s ATA Device (CD player) - Code 19 error in Device Manager

  I have a problem in my DVD player, I have * mast * a DVD 850 s ATA Device *, there driver not working anymore. Now Iam not able to run my CD/DVD. Every time I have insert any disc, nothing happens even the DVD drive icon is not there in * computer file. I opened the * Device Manager * and I got this message when I click on properties
  * "" Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. " (Code 19) » » *

  I tried updating the driver but it says "" your driver is up to date "" I don't know what to do...

  Please help me! I will be very thankful to you

  Thank you

  Concerning
  Faisal

  What model laptop do you have?

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Satellite A300 - search driver for Pioneer DVD - RW DVRKD08A ATA Device

  Hello

  I have a Satellite A300.
  My problem is that the driver for the Pioneer DVD - RW DVRKD08A ATA Device does not work. I have research the Toshiba site for a new driver, but I can't find.

  Can someone help me?

  I put t understand why you need this driver?
  What do you mean by player don t work?

  The Windows operating system contains such driver! It s an own drivers from Microsoft and the ODD should be recognized automatically.
  In your case, you should first check if the CD/DVD drive is recognized in the BIOS.
  If it s not the case then your new ODD is not compatible or there is a hardware failure.

  If the BIOS recognizes the drive CD/DVD correctly, but if the ODD is not correctly in the Windows Device Manager (yellow exclamation point) then this could be the problem of registry.
  In this case, you should remove the reader of CD/DVD from the list of devices and must restart the new laptop

• Average cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

  My medium in cd - / dvd-station is niet leesbaar (MATSHITA DVD-RAM UJ870BJ ATA Device)

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to remove safely remove the icon of the DVD RW AD ATA device optiarc 7561 taskbar for windows vista

  How to remove safely remove the icon of the DVD RW AD ATA device optiarc 7561 taskbar for windows vista

  Hello Mark G,.

  I think that Christopher was referring to right click on the remove safely icon on the taskbar and choosing then to remove it safely.

  Otherwise, this may be a feature of the device driver and the device manufacturer may be able to tell how.

  Best regards

  Matthew_Ha

• Philips dvd +-rw dvd8631 ata device

  I added a Philips DVD +-RW DVD8631 ata device in my system, ultimate vistas has downloaded the driver but still not play or burn or even work. Well it opens but that's all. any suggestions?

  Your CD or DVD drive cannot read or write media:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060