Device driver for hl-dt-st-dvd + rw ghbon cd rom device disabled

Similar Questions

• I NEED A DRIVER for MY OLD BENQ DVD DD DW 1650 HELP if you please.

  I NEED A DRIVER for MY OLD BENQ DVD DD DW 1650 HELP if you please. I would like to burn DVD & CD

  I would go as far as to say that you you need a third-party software to burn the DVD. XP should be able to burn CDs, but I recommend the use of third party for both DVD and CDsoftware. I hope that this will have been provided with your PC and/or an optical drive.

  Keep away from products of packet writing if you can (for example, Nero InCD), I found that it is a very reliable way of writing optical media.

  Tricky

• Driver for tsst ts-l632p DVD player has stopped working

  Yesterday I tried to install office 2007, but after inserting the dvd into noticed that it lacked the d:\ icon. I went into Device Manager and I just found out that the "tsstcorp cddvdw ts-l632p ata device' is yellow, with this error:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  The BIOS is recognizing the material, and if I delete the entry in the Device Manager it reinstalls itself, so if I'm lucky is not a hardware failure, but a driver problem.

  I have not tried to start the laptop with the included dvd disc, I'll try that to confirm whether this is a hardware or software problem. In the meantime, what can I do to fix this?
  It's windows Vista edition premium, on the toshiba satellite L305-s5885. I don't want to reinstall vista just for that. Is there a way I can download a new driver and try again?

  Hello

  Try this http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Satellite M40-136 PSM40E: faulty driver for Multi-lecteur of DVD

  Hello
  I got my dvd rw Multi-lecteur drivers faulty in that it burns no more files. How can I have access to the driver/firmware for matsu * a uj - 831 s? the bios intel available again "failed to loadbiosimage".

  Thank you very much
  George

  Hello

  I think that you need to download the latest driver of DVD for your M40 from the Toshiba download page and reinstall.

  Good bye

• Where can I find driver for HL-DT-ST DVD + RW GSA_H37N ATA?

  I removed the old driver that I received a message that says Windows cannot start this hardware device because its configuration register is incomplete or damaged (code19) any help much appreciated.

  Hello

  All optical drives that I've seen work with native support built into the operating system. Make/model specific drivers are not necessary (otherwise how would Windows settle optical media?).

  When optical readers to driver problems, the solution is normally that the registry must be modified, as defined in this atricle...

  http://support.Microsoft.com/kb/314060

  However, as you say "removed" the former pilot, I can't say with certainty that the steps described in the article above will work for you. If they aren't, maybe if you we say exactly how you deleted this driver, we might be able to offer other solutions.

  Tricky

• Win 8.1 driver for "HL-DT-ST DVD +-RW GU60N.

  Hi guys, I installed Win 8.1 on my laptop of PRECISION M6600 but my DVD-ROM is not working, can someone help me find the drivers?

   

  Thanks in advance for your help.

  There is no driver CD or DVD. You have not installed the chipset and INTEL RST aka mass storage drivers.  You may also launch a patch until you can replace operation ATA AHCI sata.  Optical drives of new machines don't work at all in ATA mode.

  http://support.Microsoft.com/kb/922976

  http://support.Microsoft.com/kb/314060

• Portege A600 - need driver for MAST * A DVD-RAM UJ 862AS

  Please, where can I find the driver for:

  CARPET * A DVD-RAM UJ 862AS

  Thank you in advance.

  Sabre - Italy

  Hello

  Why do you ask for it? The drive is not visible?

  I mean that the driver is not required for ODD (optical disc).
  Windows uses the Microsoft own driver who is still part of the Windows System.

  You see a yellow exclamation point in Device Manager?
  I recommend the removal of the STRANGE in Device Manager. Then, you will have access to the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, you have to restart the device.

  Check and I think that the STRANGE should reappear.

• How can I get a disk drive missing for burning cd or dvd in windows vista photo gallery. I use to have one, but it has now disappeared...

  I've always had a disk drive for burning cd or DVD in my vista / windows photo gallery, but a week ago, I tried to put some more pictures on a CD and received a message saying: there is no disk drive for burning cd or dvd, and I do not know where he was going. How can I pick up my hard drive?

  I've always had a disk drive for burning cd or DVD in my vista / windows photo gallery, but a week ago, I tried to put some more pictures on a CD and received a message saying: there is no disk drive for burning cd or dvd, and I do not know where he was going. How can I pick up my hard drive?

  ==================================
  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• Satellite A300 - search driver for Pioneer DVD - RW DVRKD08A ATA Device

  Hello

  I have a Satellite A300.
  My problem is that the driver for the Pioneer DVD - RW DVRKD08A ATA Device does not work. I have research the Toshiba site for a new driver, but I can't find.

  Can someone help me?

  I put t understand why you need this driver?
  What do you mean by player don t work?

  The Windows operating system contains such driver! It s an own drivers from Microsoft and the ODD should be recognized automatically.
  In your case, you should first check if the CD/DVD drive is recognized in the BIOS.
  If it s not the case then your new ODD is not compatible or there is a hardware failure.

  If the BIOS recognizes the drive CD/DVD correctly, but if the ODD is not correctly in the Windows Device Manager (yellow exclamation point) then this could be the problem of registry.
  In this case, you should remove the reader of CD/DVD from the list of devices and must restart the new laptop

• where can I find a driver for the jlms dvd rom? 166 the code 41 when I ran device mngr

  where can I find a driver for the jlms dvd rom? 166 the code 41 when I ran device mngr

  http://www.Dell.com/support/drivers/us/en/19/driverdetails?DriverID=RM3KY

  do you have a dell?

  You can go to dell drivers and downloads page, enter your express service code and all the relevant drivers to your system will be displayed.

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Code 19 cd dvd not working not not with Windows Vista Business-failure to load the software driver for ATAPI DVD A DH16A6S ATA Device...

  Barely noticed as useless before using the dvd on this machine cd - error code indicates... .Configuration (in the registry) is incomplete or damaged. (Code 19)

  Having read the other answers and the last similar validation seems to be dated to April 2010 of anything else because it please?

  I tried Driver Update and reinstall... .rebooting and then on the line ' difficulty his "all so far nothing works.  What is the latest information about this problem - can any that provide extra help or guide me for more relevant prior display and the best way to proceed. Failed to load software driver for ATAPI DVD A DH16A6S ATA Device...

  Mr. Fix it's obviously gone vacationing insofar as this problem is concerned... Cheers for any help.

  Hello

  Norton is known to cause slow downs and other issues. Uninstall and then running
  the Norton Removal Tool to stop the remains (even those will interrupt the strange) to load.
  Use the recommendations below when testing, even better would be permanently.

  Norton Removal Tool
  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  =================================

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.