Microsoft ISATAP adapter #28 (device driver software installation problems)

Similar Questions

• Error during device driver software installation blue screen

  Original title: 'Install the driver software for device' => BSOD

  'Install the driver software for device' => BSOD (WD My Book World Edition II network storage)

  Hello

  I have WD My Book World edition II network storage and it worked fine with my Vista Home Premium (64 bit) beyond six months, I got it.

  Months ago I have access from explorers file search 'network '.  During this point Vista asked me something like "want to install you the drivers for this device? I pressed No. because previously there has been no need to install anything. After that Vista has asked same question whenever I start my computer. Annoyed by the same query I finally pressed Yes. Then it started to install drivers and I had blue screen.

  Now whenever I start my computer (if my storage network is turned on) vista begins to install the drivers and accidents. End result is that I can't use my network storage.

  No idea how to solve this problem (without formatting and reinstalling vista)?

  Hello

  the cause of the accident is the driver:

  Image path: \SystemRoot\system32\DRIVERS\mrdd.sys
  Image name: mrdd.sys
  Timestamp: Wed Nov 12 07:44:48 2008

  From what I see the pilot belongs to your driver SATA of Marvel . As you can see that the driver is a bit too old. Update the driver, please.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Hundreds of "Microsoft ISATAP Adapter" s in interfaces, slow down some networking applications

  Hello

  Recently, I noticed that some Java applications on my computer take a long time to start: at startup, the grip of the application within about 20 seconds, while the Task Manager indicates that the "javaw.exe" process takes 25% CPU usage (I'm on a quad-core processor, then that would mean that the process of one of them is fully) at the end of the duration of block applications finally starts and then normally works (and the CPU usage decreases). However, this long startup time is annoying when development/debugging Java applications.

  Make debugging, I could see that what was slowing down applications is a method of the Java API called 'getNetworkInterfaces' that retrieves the list of available network interfaces. Running a test program showed me that this method has found more than 1,000 network interfaces (!) on my system, which most is labeled "Microsoft ISATAP Adapter". Apparently, this method is called at the beginning of these Java applications, for reasons that I have not always figured out.

  Did some other research, I found that this method calls a Windows API 'GetIfTable"( MSDN documentation ) function: runs the C++ test program still shows the same number of interfaces (~ 1 000), with all the"Microsoft ISATAP adapter' s. as a result, the problem is probably not due to lack of Java; It's just more noticeable on Java applications, because Java must create a NetworkInterface object for each of these interfaces.

  Still more research to show that it is a known problem in Windows 7 and Windows Server 2008. The question now is: how to remove these "Microsoft ISATAP cards?" They do not appear in the devices, or using DevCon Manager as suggested on other forums. So far, I have not found a satisfactory answer.

  Here are a few links relating to the issue, this could enlighten us:

  This seems to be the issue as described in the base, Microsoft technical support, but he mentions "6to4 adapter" not "maps ISATAP.

  This user in the forums TechNet has the same problem (multiple interfaces, network do not appear in Device Manager, can't get them off with DevCon) but the wire provided no real answers. It would also be interesting to know where getIfTable retrieves network information: apparently is not in the registry.

  Finally, the most interesting link is one that also describes the issue (if it is on Windows Server) and mentions the effect on Java programs. He described a solution mentioning a tool "NDISCLEANUP" but I can't find it anywhere. Where can I get this tool?

  Hello

  Thanks for the reply.

  According to the description I would recommend that you post the question on the Windows 7 IT Pro forums for assistance.

  Windows 7 IT Pro Forums

• Microsoft isatap adapter, get the message "this device cannot start code 10".

  have you tried the driver from the web and update manually update but it States driver is up to date?

  Hi"

  "Description of errors related to the 10 Code that generates the Device Manager in Windows on computers"

  http://support.Microsoft.com/kb/943104

  But it's the information from Microsoft Isatap adapter:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• We get an error "Device driver software has not been installed successfully" when installing Microsoft LifeCam HD-3000

  * Original title: does not always

  There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?

  Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.

  Hi Rachel,

  Thank you for your response.

  I suggest you to contact the Microsoft Hardware support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  It will be useful.

• HP DV6936us triangle slow playback of videos, Microsoft ISATAP Adapter #8 shows yellow in Vista

  Videos r play slowly, cannot play music and I can't not all sounds

  After noticing my hp DV6936us running slow when I play any video from Youtube, new videos or just WMP. I found something wrong in the "Device Driver"; "Microsoft ISATAP Adapter #8"which is listed under "Network adapters" has a yellow triangle to her attache. ". I do allow me to back rool the pilot, "update of Microsoft Research" tells me the driver software is up to date and "Scan for hardware changes" does not answer at all. Also my songs on WMP will not play either and here, the message is: "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web. "When I click I get:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  What should I do to recover my videos play and sound in my pc? In addition, anyonelse met simular problems? I wonder if it has to do with one of the last update of Windows. Thank you. Note: You answer directly to my Email address is removed from the privacy of e-mail * *.

  Hi volmar001,

  Please see the post below with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/350807c7-90ea-4556-859b-0d69d58303af

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows #2 ISATAP adapter cannot load driver (code 31)

  Using Vista Home Premium, I get the following error message:

  "microsoft isatap adapter network adapt #2 windows cannot load driver (code 31).

  Because I can not connect to the internet, where can I get the correct driver.

  Hello

  Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

  Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

  My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

  I think that it is also affecting my internet connection and disrupt its speed.

  Can you please help with this question?

  Thank you very much
  Tony

  Hi Tony,.

  You can try reinstalling the device driver and check if it works.
  Uninstall and reinstall the device in Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. Locate the Microsoft ISATAP Adapter device
  c. right-click on the device and select uninstall
  d. restart the computer and check.

  You can also consult the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx/KB/932520

  Hope this information is useful.

• MS-DOS 16-bit subsystem. A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.

  (1) running the command

  16-bit MS-DOS subsystem
  ---------------------------
  C:\WINDOWS\system32\command.com
  A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.
  ---------------------------
  Ignore relatives
  (2) control ML
  When am usin masm611
  'ml' is not recognized as an internal or external, operable order
  program or a batch file.
  What am supposed to to make clear this error?

  Hi Pushku,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue while using masm611, here is a link that gives you steps to change the registry settings to resolve the issue:

  "16-bit MS-DOS subsystem" error message when you install a program

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  If you need further assistance, please answer and we will be happy to help you.

• Microsoft ISATAP # 15 has a driver problem

  Please I think you are laughing at me, I encountered a problem Microsoft Fix it: Microsoft ISATAP # 15 has a driver problem
  So I'll try to get and proposed type of meeting: access and pay solve you your problem. Today, I was put through the online system and gently after a certain time the consultant Jan I guided me to access a premium of gentlemen, but you had to pay and he then after paying I would have my my pc with the problem solved.
  I just think it's a shame that Microsoft company ffazer with their customers who bought a pc with your system and you have no guarantee or maintenance. My Windows Vista system was paid for with a lot of sacrifice and money as a result of my work. Now with 63 years I have to live with these Microsoft games.
  Thank you and good afternoon

  Original title: Microsoft are you kidding me?

  Hello j. a. Lopes,.

  Since your original post, you say that you have problems with a Microsoft ISATAP # 15 pilot.

  Take a look at this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/microsoft-isatap-adapter/a0c8e409-0016-4a81-bab5-20b639893930

  In particular the answer by Diana D. see if she thinks help with the problem.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• My windows 7 hangs at startup and does not update microsoft isatap adapt #5.

  I use lenovo v570. Windows 7 just hangs up on start. IM using safe mode now. but when I check the drivers, the microsoft isatap #5 adapter has a yellow exclamation point and does not update. What should do? Help, please.

  Hello

  It's the Microsof Pnrtie on "Microsoft ISATAP adapter"

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• n ° 2 of Microsoft ISATAP adapter of attachment

  In the monthly Norton Anti Virus report it is said that it is a device that is not working and I suggest authourise Norton to 'repair' should I go forward?  the said device is a Microsoft ISATAP Adapter #2

  Hello

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore errors
  If you wish and on some computers, it will always be there but no problem to be expected.

  On a Windows Vista-based computer or on a Windows Server 2008 computer.
  the Microsoft ISATAP map appears with a yellow exclamation mark next to it in
  Device Manager and you also receive an error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MDR-ZX750BN - device driver software was not successfully installed

  Here my problem, I go to my bluetooth to add a device I turn my headset on "MDR-ZX750BN" it detects and so I add it starts to install the device drivers but then and I encounter the message "device driver software was installed correctly. Now, I tried to man to try and fix this problem, so I hope someone here can help know me fix the. I think it has something to do with the drivers not being do not or are not planned to install the good. I just need to know how to fix it. I'll be very grateful to anyone who can help me with this problem. Thank you.

  Hello Eric,

  Thanks for posting your query on Microsoft Community forum.

  When you connect a new device to your computer, Windows tries to install it for you automatically, and will notify you if a driver for the device is not found. There are several things you can try if this happens:

  I suggest you try the steps in the following article.

  What to do when a device is not installed correctly

  Get back to us with the result of the steps so that we can help you further.

  Kind regards.

• Equium A200 - windows requires a driver for Microsoft ISATAP Adapter

  Hello

  I am a complete newbie at this forum and came looking for help. I recently bought an Equium A200 laptop computer with Vista preinstalled.

  Lately when I start the computer and log in to Windows, I get a message that windows requires a driver for an unknown device and ask for permission to connect to the internet to find the driver concerned. When I click on this option, I get a message saying that the computer has found the driver but has encountered an error trying to install "Microsoft ISA TAP adapter".

  What is it and why should we need for installation? I thought it was quite strange. Any ideas people?

  Any help will be much appreciated.
  J.Sutton

  Hello

  I searched a bit in the Microsoft Knowledge base and discovered that this symptom appears on computers running Windows Vista.

  http://support.Microsoft.com/kb/932520

  Microsoft recommends that ignore this error message. This error message does not indicate a problem with the adapter, computer or any other device. The adapter will continue to function correctly.

  Here are more details;
  + Microsoft ISATAP what inter Site Automatic Tunneling Address Protocol device is used to help the transition to an IPv6 infrastructure companies. Map ISATAP encapsulates IPv6 packets with an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure. +

  Concerning