Device driver Upgrde-NOR-488. 2

Similar Questions

• Connection problem-NOR-488 GPIB: connection to the driver or device error

  Hello

  I am trying to connect with my tunable laser "Santec" by GPIB-USB-HS. I received the file VI Labview (instrument driver) for my model of tunable laser STL-210 http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=2791 . When I run any VI, for example the "laser_on_off.vi" file I received the error message "NOR-488: connection to the driver or a device error. I checked the 'measurement and automation explorer' and Communicator of NOR-488. 2 gives me the following message appears when I send "interrogate" send string * IDN?

  ----------------

  It is meaningless.

  You have to step way back. The Setup instructions for the GPIB-USB-HS shows you first run diagnostics. Finally, you have done this and got a failure. That's why you get "NOR-488: connection to the driver or a device error. Until the diagnostics pass, you lose everything just your time with anything else. Please provide details on the failure when you run the diagnostic tests.

• IdeaCentre B310 WIN 10 missing device driver

  I tried to move a B310 ideacentre to 10 Windows Home for a friend. Everything seems okay except that I have 3 entries of a device driver missing listed under other devices in Device Manager.

  Could someone help identify what it is please and where I could get a compatible driver?

  This is an entry called "Base system device" which appears 3 times under 'other devices '.

  Details of the material under properties for each of the 3 are:

  PCI\VEN_197B & DEV_2384 & SUBSYS_360F17AA & REV_30
  PCI\VEN_197B & DEV_2384 & SUBSYS_360F17AA
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  PCI\VEN_197B & DEV_2382 & SUBSYS_360F17AA & REV_30
  PCI\VEN_197B & DEV_2382 & SUBSYS_360F17AA
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  PCI\VEN_197B & DEV_2383 & SUBSYS_360F17AA & REV_30
  PCI\VEN_197B & DEV_2383 & SUBSYS_360F17AA
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  Nice day.

  This should be the card reader.

  Looking at your pages of pilot: support.lenovo.com/us/en/products/Desktops-and-all-in-ones/IdeaCentre-B-Series-all-in-ones/IdeaCentre-B310

  I see no Win10 at all driver, nor same Win8/8.1 drivers. There are only Win7 drivers for the card reader, but I don't know if they will install in some form of compatibility mode.

  Kind regards.

• Installation of NI-VISA and NOR-488. 2 on Mac

  I have a new Mac on which I am trying to install instrumentation OR (VISA and GPIB) pilots, and things don't work any tips would be appreciated. I downloaded the most recent version of these two (14.0 visa) and 3.0.1 for the GPIB, ran the installers (restart the computer between the two installed) and then tried to run the VISA configuration utility and the GPIB configuration utility to verify that the drivers were ok (at this point, no measuring equipment is attached to the machine (ultimately, the material will be a USB-> RS232 adapter and a USB-> adapter GPIB).

  The two configuration utilities crashed running. Config GPIB obtained in what concerns to the top of its window and then crashed a few seconds later; NI-VISA never even managed to finish to display the home screen.

  In reviewing reports of incidents, accidents seem to be in the OR-PAL driver at low altitude. The report indicates that

  / Library/Frameworks/nipalu. Framework/versions/1/nipalu

  Abort() called

  Poking around the list of files mentioned in the uninstall NOR-PAL guide, it seems that the kernel extension nipalk.kekt was not actually installed correctly (it is absent of/Library/Extensions and/System/Library/Extensions, and according to the uninstall folder, it should be present in both. I tried to copy the kext above a machine that does not have a functioning VISA/GPIB install, but OSX refused to load because it has not actually been installed.

  My plan right now is follow the uninstaller for VISA, GPIB and NOR-PAL and then try to run the installers, but I fear that I will end up in the same place. Y at - it something special or something needed to get these drivers to install correctly (i.e. should things be installed in a specific order, should I try to install VISA 5.4 and then do an upgrade installation 14, try to sacrifice a goat, stuff like that)?

  The material is a Mini Mac OSX 10.9.5 running.

  Thanks for any help.

  And just to follow up with a few additional details, I went through the same procedure on a second Mac that was fresh out of the box. When running Setup for NOR-488, one of the things that we tried to install was an "Update" the subsystem NI Core Services of pilots. This was despite the fact that the VISA facility has implemented a much newer version of the kernel drivers.

  Thus, it seems that the problem is that NEITHER-488 Setup does not correct version control before overwriting the subsystem of pilots. He obviously checked that the driver has been installed, since the action has been listed as "update" instead of "install".  At least in principle, running the installer of NOR-488 first, then the VISA installer should work, but for some reason some the only time where I tried in my tests, it did not work. Maybe, I haven't had a full work of sanitation among other failed attempts. Just for the record, is the sequence that seems to work

  (0) remove all traces of any agreement, failed to install. Follow the steps described in the files uninstall.txt for NOR-488. 2, NI-VISA and NOR-PAL. The uninstall for this latter guide is located in/Library/Application Support / National Instruments/NOR-PAL

  (1) perform a standard installation of NI-VISA 14.0. Restart the computer. Check VISA works (just run the config utility)

  (2) perform a standard installation of NOR-488. 2 3.0.1. Restart the computer. The VISA and GPIB crash when access

  (Optional) curse (2A) to the length

  (3) perform a standard installation of NI-VISA 14.0. Restart the computer. The VISA and GPIB should now be functional.

  Tested on a pair of 'Late 2012' Mac mini OSX 10.9.4 running. One machine was Labview 2014 before you install the drivers for the instrumentation, the other had not installed LabVIEW.

• NOR-488. 2 missing

  Hello

  I made a kit of distribution for one of my programs, but then decided to add on the program. When I went to build another distribution kit, Labwindows stops halfway through and said that NEITHER-488. 2 could not be found in the directory and insert the Labwindows DVD driver. After that I inserted the disc, it still can't find the NOR-488. 2. This has happened on two separate computers with installed Labwindows. What can I do to get this driver?

  
  

• Problem Win7: Device driver (* .inf) within the distribution is not installed in setup.exe. Why?

  Hi people,

  We have a device driver (* .inf) to our application that is added to our distribution , we create in CVI. In the past we did copy the *.inf in the /dossier inf directly (using the distribution Installer "files"-Tab "").

  Recently, we have followed the guidelines described in "Using LabWindows/CVI to install your device .inf files.

  So we have now chosen a significant subdirectory of our application as the destination folder for the file *.inf instead of directly copy in the system directory.

  Everything works well (besides the fact that our driver has no signature and needs user interaction), while using Windows XP.

  DIFxApp (run MsiProcessDrivers) recognizes the *.inf file and installs the device driver.

  After completing successfully the setup.exe, the specified *.inf has been duplicated as oem*.inf/pnf under /INF.

  But under Windows 7 the *.inf is not installed. I ran "setup.exe/l * v" for the information of the installation log file.

  And I found this article:

  MSI (s) (8:9 C) [13:56:41:043]: jumping action: MsiProcessDrivers (the condition is false)
  Of course the step of installing the drivers is ignored.

  Choose the /INF in the folder target to the *.inf (which does not work on Windows XP) everything works fine.

  Does anyone know why MsiProcessDrives is ignored in Windows 7? It is always ignored or I do something wrong?

  Help is appreciated!

  Thank you!

  Philipp

  PS. : The device driver *.inf was written for several OS (XP, Vista, Win7) target according to Microsoft guidelines for this. So it of a universal *.inf file and can be used in each operating system from XP to Win7.

  Good,

  I solved the problem myself.

  The problem is related to the DIFxApp.dll , which is available as 32-bit and 64-bit version.

  In my case, I created the distribution as the 32-bit version. That's why 32-Bit DIFxApp.dll is merged into the MSI file that is not compatible with Windows 7 (64-bit).

  This is why NOR added to this CustomAction Condition (NOT VersionNT64) for MsiProcessDrivers, which is perfectly adapted to the species but of by not having is not the *.inf file

  installed in Win7. I guess the distribution building like Release64 it will use the 64-bit Version of DIFxApp.dll. I'm not able to verify that (still works on XP).

  But then it will probably crash on XP.

  But anyway. We have a distribution for the two BONES.

  Quick & dirty solution I figured out:

  -Edit-> files distribution: Add the *.inf file to C:\window\inf

  -Manually add VersionNt64 condition in the resulting MSI file under component -> (you can use the ORCA editor for this)

  So now, in the case of XP, the *.inf file gets installed by DIFxApp.dll.

  Windows 7 using the *.inf is copied directly in the windows/inf folder and installs automatically the first time that the device is connected.

  I guess you can merge DIFxApp.dll (32 bit) and DIFxApp.dll (64-bit) to the MSI and manage things together, create conditions. But it is not quickly implemented. At least for me is not...

  Regards Philipp

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith

• Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

  There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

  Original title: coordinator.exe no disc

  I got this message after installing BitDefender antivirus.
  It turned out to be partly because of WinPatrol - who had not been uninstalled.
  And the program uninstal delete his entry autostart nor its program file.
  Which has supported, manually, the end of the message...
  But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

• USB device driver

  I deleted Apple Mobile Device USB driver on my Windows 10 machine with the intention to reinstall. How can I find the installation package for the Apple Mobile device driver?

  Thank you

  Dave in STL

  Apple Mobile Device USB Driver missing

  and maybe:

  http://www.technipages.com/iTunes-fix-iPhone-or-iPod-not-detected-in-Windows

• Windows Vista will not install device driver for Palm Centro

  My PC Windows Vista can't find info from device driver to install my new Palm Centro.  I downloaded the latest version of the Palm software.  Any ideas?  Thank you!

  What version of Vista you have?  32-bit or 64-bit?

  64-bit cannot sync via a cable - only via a wireless (BlueTooth or IR) method.

  Wyrenut

  
  

  Message relates to: Centro (AT & T)

• Missing Base system device driver

  I bought my Elitebook 8560p a few weeks back off a friend. Wiped the whole laptop and installed a new operating system (Windows 7 Ultimate 32 bit). I thought I installed all the drivers but im told Device Manager still lack a "Base system device" driver Help please?

  Hello

  It is very good

  The driver you need is for the Card Reader JMicron Media which can be downloaded and installed from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5056949 & prodNameId = 5056950 & swEnvOID = 4055 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-93389-1

  Kind regards

  DP - K

• Satellite NB10-A-103 - necessary wireless device driver

  Hello

  Recently I have formatted my HARD drive and reinstalled Win8. In the process it seems I lost my wireless device driver and cannot find the reference of it to download the appropriate driver. Could you please tell me what device by which the manufacturer is installed on my laptop?

  Part no is PU141E-00K01FFR.

  Thank you.

  If you used the original image of recovery for Win8 installed all drivers must properly installed e. You can check in the Device Manager. Adapter wireless network installed and registered correctly?

  In any case, all the drivers, that you can download at Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp
  

• Portege A600 - Windows 7 installation CD/DVD device driver

  Hello.

  I am trying to install Windows 7 Professional 64 bit on my Portege A600.

  I tried to boot from the DVD, flash. I changed all of the possible settings in the BIOS, I have updated the BIOS to version 3.0, but I still have this bloody error "a required CD/DVD drive device driver is missing". Is there a place where I can download this driver to show the installer without having to download a 100 TB of pron?

  Or is there a way to fix my problem?

  Hello

  First of all there is no special driver CD/DVD. It of a part of Windows 7 and so there are no drivers available.

  It would be interesting to know when you get this error exactly.

  Maybe your defective CD/DVD drive. You can test another?

• HP ENVY m6-1254eo Notebook PC: unable to connect to the Synaptics Pointing Device Driver

  Dear community of Hp,

  I had a problem with my hp envy, which occurs a few weeks previously and now has decided to post here in the forum hp laptop because

  no solution can be found on the internet. Ive done a lot of research and try but nothing happens.

  I knew that the Synaptics Touchpad no longer works. I tried to uninstall and reinstall the driver, but I do help. I still see the touchpad in the listof material and devices.  And every time that select the properties of the mouse it still appears the message like this unable to connect to the Synaptics Pointing Device Driver, if you have installed a different ps 2 device driver scoring please uninstall the synaptics using the Yes button.  You must then reinstall your device external device driverfor score again. 

  In the control panel > Device Manager > display hidden devices under the mouse and other pointing device, there is a yellow triangle on the HP TOUCHPAD SMBUS.

  I really need your hp experts helps solve my laptop problem.

  Thank you in advance.

  Hi @topzias,

  Thank you for the update.

  Would you be so kind as to post what worked for you in the public forum, where others can see it and maybe help?

  Cheers to you and thanks in advance

• Bluetooth device driver

  Hello.

  Where go I find Bluetooth device driver

  kamran132 wrote:
  

  I already install but when I connect with xperia sola PC some drivers were installed, but one was not installed.

  Go to Device Manager' from 'Control Panel' - or - comes with the right button on the icon my computer and choose 'Properties' and then click on 'Device Manager'.
  
  -You will see the "unknown device" named "Bluetooth Peripheral Device"
  
  -Right click and click on "Update driver software" - or - anyway find you easy bring up the update of the driver window.

  &

  TRY THE SONY UPDATE SERVICE UPDATE:

  http://www.sonymobile.com/GB/tools/update-service/

  http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

  PC Companion: http://www.sonymobile.com/gb/tools/pc-companion/

  Hope it resolves,

  Thank you