Windows Vista will not install device driver for Palm Centro

My PC Windows Vista can't find info from device driver to install my new Palm Centro.  I downloaded the latest version of the Palm software.  Any ideas?  Thank you!

What version of Vista you have?  32-bit or 64-bit?

64-bit cannot sync via a cable - only via a wireless (BlueTooth or IR) method.

Wyrenut


Message relates to: Centro (AT & T)

Tags: HP Tablets

Similar Questions

  • Windows 7 will not install the driver for hp deskjet 6540

    I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

    There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

    If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • Windows Vista will not install the usb driver for kobo reader

    I am trying to configure my reader Kobo following the indications, the PC does not allow me to install a USB driver for download, I tried many times

    but it keeps blocking.

    When you connect the device Kobo try to choose 'Manage the library', so the camera gets identified:

    http://kobo.intelliresponse.com/index.jsp?requestType=NormalRequest&id=1438&source=5&question=Do%20I%20Keep%20Reading%20or%20Manage%20Library?

  • Another problem of Installation of Service Pack 1 of Windows Vista - will not install

    Hey guys, a greeting from Belgium in my first post.

    I recently reinstalled my Windows; This is a Home XP and a Vista Edition Home Premium (updated, so I need to install XP first).
    When I got it setup XP, which goes perfectly to SP3, I switched to Vista. All the small updates installed outside for a few "failures" caused by Vista stop updates itself, because they were not absolutely necessary.

    When SP1 popped up, I decided to download both and see other things, but when you try to install through Windows Update I get the error message "this update cannot continue while some services are still in use" or so, I don't remember the exact message or code.

    When I downloaded the SP1 on the Microsoft site, it worked better and smoother then Windows Update but also to is crushed when the progress bar has been a little more than half. Yet once again, I don't know the exact code but I do not know the message: "update cannot continue because of an internal problem.

    That's what I tried:

    -Retry it 40 times
    -Try in safe mode
    -Turn off all the other third part of the programs, including Win Defender
    -Tried the system update tool
    -Keep hope

    That's what I did afterwards:

    -Save all my settings
    -Rebooted and selected the dualboot XP
    -Formatted the separate partition holding the part of the dualboot Vista
    -Reinstalled on the same partition with the recommended settings, no change

    I would like to have an answer soon, people. I would be incredibly grateful if this could be resolved. Future changes may include error codes given.

    Hello Fallycrom,

    Thank you for using the Microsoft Answers forums.  We have the exact error message and the error code to help you. I suggest you check that you don't have any unknown hardware.  Click Start (Orb), then right-click on computer and choose Properties.  Select Device Manager and see if you have devices mark or explanation.  If you do, you will need to install the drivers for this device.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista will not install updates.

    I came across Best Buy, bought the first thing I have seen & to the left. It's just the small things. My main PC is myPC music recording studio (never online) so for my this, that I bought... I don't care.

    a m9402f 7.00 GB 64-bit system quad-core 2.30 Ghz procesor.  On the 626 GB on the 'C' drive, I only used GB 129.  I don't know why I've bothered w/a Seagate external extreem HD 1000GO?  Works great, I've never used one before Vista but works very well.

    Thus, recent updates do not keep install .  What's up with the updates? What is happening with this? Should I just go buy Windows 7?  I spend hours looking for solutions and never ask for help, but this time I am so tired so I'm going to ask.  Below are updates that keep a failure... Notice they're on SP2 * and IE8. My PC alread had installed SP2.  I tried an update for this.  I have switch from IE 7 to 8. I don't see any other reasons.

    Maybe I'm missing something?

    Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB982381)

    Cumulative update for Media Center for Windows Vista for x 64-based systems (KB982480)

    Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 Security Update for x 64-based Systems (KB979910)

    Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 update for x 64 systems (KB982525)

    Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 update for x 64 systems (KB982536)

    Microsoft .NET Framework 4 Client Profile for Windows Vista x 64-based Systems (KB982670)

    Update security for Windows Vista for x 64-based systems (KB978542)

    Update security for Windows Vista for x 64-based systems (KB979482)

    Update security for Windows Vista for x 64-based systems (KB979559)

    Update security for Windows Vista for x 64-based systems (KB980218)

    Update to the list of compatibility view Internet Explorer 8 for Windows Vista for x 64-based systems (KB982632)

    Update for Windows Mail Junk e-mail filter for x 64 systems [July 2010] (KB905866)

    Update for Windows Vista for x 64-based systems (KB981793)

    Update for Windows Vista for x 64-based systems (KB982519)

    A LOT of these updats were on UPDATE SP2 which was on my computer when I bought it, but they do not work...

    Others have to do with the "compatibility issues" for 32-bit web sites.

    .. and yes my stuff Adobe, Flash and Java are all kept up-to-date too.  Please keep in mind, I know how to get to these files support and update history and try to update manually and with each of them, the research questions and check forums, so I spend a lot of time doing this.  A lot of information is not new.

    Speaking of a new VISTA user...  My C drive has a file that says "Program Files (x 86) and this is where I go for all.»  What is it? It was my first VISTA computer. So forgive me... I'll tell you something about the music industry, but forgive me this ignorance.   Other folders have programs in the files of "program" and identical named files... What is so special about this (X 86)... I'm in 64-bit and sometimes still in 32 bit? capacity?

    My computer is compatible for Windows 7... should I go and buy and put an end to this? I could put it apart for just photo software stuff... Let me see it done 7 computers in the House.  sheeesh! Thank you... it's me now to lock up.

    "Talk of a new VISTA user...".  My C drive has a file that says "Program Files (x 86) and this is where I go for all.»  What is it? It was my first VISTA computer. So forgive me... I'll tell you something about the music industry, but forgive me this ignorance.   Other folders have programs in the files of "program" and identical named files... What is so special about this (X 86)... I'm in 64-bit and sometimes still in 32 bit? capacity? »

    Hello, I run the servers at my work, and systems are 64-bit.  It would be just that sometimes your system needs to do things differently running 32-bit.  Not sure why they choose to divide them, but that's how it is on my servers.

  • Windows Vista will not install Service Pack 1

    Hello, I have an Acer laptop that has Windows Vista 32-bit Basic on it.  I did a factory reset on it and started to update Windows.  It says it installs successfully in 30 seconds about, but when you do another search that Service Pack 1 is found as a update and Service pack 1.  How can I fix it?  I tried the fix it tool and still no luck.

    Hello

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

  • Windows Vista will not read external drives

    I had an external hard drive connected to my computer earlier today. All of a sudden, my computer froze and started to make noises beeps, then I stopped and released my external drive.  Now, whenever I plug a drive it tells me that I have to reformat. However when I try to reformat the drive, he told me that the format could not be completed. It allows me to format NTFS, but that does nothing for me. I need to format in FAT or FAT32, but it won't let me. I even reformatted my drive to FAT32 from another computer, but when I plug in Vista it still says it needs to be formatted.  I got lost. How can I get Vista to re-read my external drives?

    Hello

    Run the diagnostic tool for Microsoft Fixit.

    Hardware devices not detected or does not:
    http://support.Microsoft.com/GP/hardware_device_problems

    See also: http://windows.microsoft.com/en-US/windows-vista/Formatting-disks-and-drives

  • Windows Update will not install the 2587968 for Outlook junk e-mail filter. I get an error 57 a code.

    Because I do not use Outlook, can I just hide this update. If so, how? My computer has Windows Vista and Office 2003. Thank you

    Because I do not use Outlook, can I just hide this update. If so, how? My computer has Windows Vista and Office 2003. Thank you

    In the update of Vista, to hide an update...

    1. click on view available updates
    2. right click on the update you want to hide
    3. click on hide the update
    4. confirm the UAC if necessary

    If you want to try to install the KB2587968 update, try leaving the office 2003 CD in the installation drive or do a repair installation of Office 2003.

  • Windows Vista will not install a program without wanting a disc.

    I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.

    For the iPod, you must download and install the iTunes software.  For other devices, you will need to find and download the drivers from the manufacturer - if the keyboard and mouse came from Logitech for example, download the drivers from Logitech.

    writing in the new message: * e-mail address is removed from the privacy... *

    I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.

  • Windows Vista will not install new updates after installing SP2

    Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

    I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

    I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

    Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

    Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

    You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

    Let me know if you still need help, and I will respond with what I've done.

  • Windows Vista will not see Seagate 320 internal drive to format

    I bought a 320GB Seagate (7200 RPM) opportunity and I'm trying to install Vista on it. The computer BIOS sees the drive, but loading Vista it does not show the HD as an external drive and ask drivers for it. The disk has been previously formatted for Mac.

    Try to use SeaTools for Windows.  See also: Seagate Installation Assistance

    Please note that the hard drive needs to be internally mounted inside the computer because Windows Vista will not install on an external hard drive.

  • Win XP will not find the driver for my Canon Sx10 camera.

    Windows XP will not load the driver for my Canon SX10 camera. I had the camera for 3 years and have never had a problem with this load. I reinstalled XP and the same problem. Windows recognizes the camera but will not load the driver for it.

    I'll in Device Manager through the update hardware wizard I have try to install the driver manually, but I don't get the option of all available drivers.

    There is no drivers for this camera online, because I thought that Windows has the driver for this device.

    Thanks for the help,
    Ian

    Thanks for the reply. I reinstalled windows and it works fine now. I didn't want to go through the hassle of reinstalling everything.

    Ian

  • External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

    External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

    Hello Sharan,

    These links may help:

    http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

    http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

  • Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Hey Brian39

    If you change the motherboard that you normally have to reinstall vista

    your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.

    and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer

    If a retail license, you can change the motherboard

    but you will normally always reinstall vista for reasons

    Walter, the time zone traveller

Maybe you are looking for

  • App Store works sometimes not not on El Capitan

    Ive noticed that the Mac App Store sometimes does not work on El Capitan in recent weeks. When I try to install an update for an application, it could give a "service unavailable" error or just hang out and not really do anything. If I keep trying, i

  • Satellite Pro L500 - 1 6: Win 64 bit clean install - no. WLan is

    I searched the forum but no solution so far revealed itself. I did a clean install of Win7 ultimate 64 on my Toshiba Satellite L500 - 1 6 and the wireless card is recognized in Device Manager, but I can't find wifi networks or start an ad-hoc. Its sa

  • M277dw MFP: How to enable double-sided painting

    Hello I allowed in checked "duplex" via the utility application of HP, but still can not in double side printed output. I use MS Word 2016, strangely enough, the printer prints two sides perfectly program Apple Pages? Help, please Thanks in advance

  • What is ivs.exe because it is considered an exception in my Windows Firewall

    I found a program listed as an exception in my Windows Firewall. Its properties indicate E:\ivs.exe. Anyone know what it is? Running Windows Vista Home Premium SP2 - 32 bit, IE 9.

  • Dell UP2414Q (bought used, scratches on the screen. (Help!)

    Hi all I just got a Dell UP2414Q monitor 4K from a seller on eBay who claimed the device was in excellent condition.  I know, I know... buyer beware you.  Anyway, there are scratches on the screen that I find unacceptable.  The seller does not accept