Portege A600 - Windows 7 installation CD/DVD device driver

Similar Questions

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Impossible to re - install Windows Vista. "A required CD/DVD device driver is missing." appears

  I have the same problem as a previous applicant.  My hard drive went down and I had to replace it with a new one.  Windows Vista is the operating system installed on my HP Pavilion and I try to use reinstall drive.

  The message says "A required CD/DVD device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  I don't have a floppy drive on this machine, so I'll have to do the installation from a USB key.

  I tried so that it points to the Installation DVD, but it was still impossible to find the required driver.

  Thank you

  Sean

  Hey Thornwill

  HP machines have some problems with the replacement of their equipment with new hard disks not hp etc. and reinstall vista

  My advice to you would be that you contact hp

  Walter, the time zone traveller

• HP Zbook Studio G3: error cd/dvd device driver missing

  Hello guys,.

  When I try to install windows 7 Enterprise 64-bit on Zbook Studio G3, I get the lack cd/dvd device driver. I tried all the possible drivers, but no luck

  Any help would be appreciated

  Thank you

  concerning

  Generally, it is an indication that the you use the Windows 7 installation media that is inserted in a USB3.0 port. Windows 7 is not supported with native support for USB3.0 and requires the installed USB 2.0 port or a USB3.0 port emulation USB 2.0. In addition, there may be issues when you try to install Windows 7 on an Intel SkyLake chipset.

  The first step would be to go through the BIOS and see if there is an option for the compatible mode or emulation for USB ports.

  Alternatively, you can contact HP to see if they have material recovery/restore for Windows 7 to your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

  OriginalTitle:lack drivers

  I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

  Hello

  Are you able to boot to the Windows Vista operating system?

  Read the following article and see if that helps:

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

  http://support.Microsoft.com/kb/952951

• dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

  Hard to install Windows 7 32 bit on my desktop DC7800 SFF pc

  white screen - fixed (updated bios using back win98 & USB flash drive prep utility)

  installation white screen set (stopped using the dvd usb player & utilisΘ local DVD drive)

  Image DVD transferred to USB flash drive (always get this request)

  Downloaded and tried many drivers of different sites...

  Drivers, Software & Firmware for HP Compaq dc7800 Small Form Factor PC

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Intel ICH9 Chipset Driver for Microsoft Windows 7 - sp46869.exe

  It seems that nothing I try does not work.

  (always get this request for drivers)

  It has been a very long and tedious struggle day. I'm very tired and don't know where to look next to find answers...

  Any help this dispute would be really appreciated thanks.

  Well everything is solved and works well.

  Typing this from the newly built Office.

  Any Solution used (thanks to Paul Tikkanen to put me on the right track)

  (01)

  Update BIOS to fix a blank (black) screen during windows 7 Pro (32 bit) install on a hard drive (new & empty).

  Dc7800 SFF - Windows 7 drivers

  Update of firmware for HP 786F BIOS of computers with Intel processors families
  sp51245.exe

  I couldn't get this utility bootable CD version to work so had to turn to a USB bootable flash instead.

  Prepared the botable USB using - key USB W98 back Starter Kit

  (02)

  Downloaded the ISO from Microsoft file

  Windows 7 Professional with SP1 (32-bit)

  SW_DVD5_Win_Pro_7w_SP1_32BIT_English_-2_MLF_X17-59276. ISO
  Real Corsair Flash drive size - 2 377 506 KB - in windows Explorer
  Size: 2.26 GB - 2,434,566,144 bytes
  Size on disk: 2.26 GB - 2,434,596,864 bytes

  The file ISO of Windows 7 original instalation was certainly smaller that it should have been!

  (03)

  Burn the ISO on a 4.0 GB Corsair Flash drive using USB W7 Starter Kit

  New image details - Corsair 4 GB Flash Drive
  Size: 2.28 GB - 2,452,486,680 bytes
  Size on disk: 2.28 GB - 2,454,302,720 bytes
  873 files
  200 files

  (04)

  The installation went very well with only 2 issues of device driver initially...

  PCI Simple Communication controller
  Driver - Chipset
         Customer Manager Active Intel HECI Device Driver
  sp46137.exe
  PCI serial port
  Software - system management
          Intel AMT AMT 3.0 LMS_SOL
  sp46134.exe

  (05)

  I run one - SAPPHIRE HD 5450 1 GB DDR3 PCIE HDMI - Twin (DVI & VGA) graphics card

  First configuration - downloaded the drivers from the manufacturers Web site.

  On the installation of what I thought was the at and the latest driver, 2 problems...

  1 - the installation says that I needed .net Dot 4

  Downloaded and installed - Microsoft .NET Framework 4 (stand-alone Setup program)

  2 - the second test video driver installation is finished - but - screens flickered and flashed like crazy.

  I did correct anything that.

  Wiped the hard drive and run through the steps above.

  This time, making sure to use the original cd that came with the card of 2011. Result!

  PS - In the first leg through after installing windows successfully, I did all the updates of Windows 7.

  It took hours to download and install.

  Second time, I did not bother with the Windows updates immediately.

  Next step-

  3 future issues to be covered in the following threads

  (a) preparation of the utility of the technology Intel Management Acive - entirely private or disabled.

  (Do not need or want but hate having outstanding pilot flags in Device Manager).

  (b) the image of the hard drive and train you to restore boot partitions for multiboot Windows 7 installation.

  (c) work on a quick way to landslide-live stream the latest windows updates in the installation.

  Thanks for the help and I hope that some info above is useful.

  Advice on the high road (preferably free) partition SW of imagery to manage encrypted data of the partitions would be a good thing.

  Next thread?

• Windows 7 cannot install from the cd/dvd-rw LG GH22NS90 player. "the CD/DVD device driver is missing" message is presented. How can I recognize the device?

  Separated from this thread.

  I have the same problem, my Windows email me the error code (19) of register incomplete or...
  I have download the drivers from the web LG.com and he send me, devide cant find.

  I try, I try and without operation = s help to respect? THX

  Hello Hendry,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions using the CD/DVD drive in Windows 7 computer. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  1. Are you able to access the other CD/DVD drive in Windows?
  2. You try to install the drivers for any device?
  3. When say "Windows send me error code (19)", you get this error message in Device Manager?

  In the meantime, please follow the below suggestion to solve the problem.

  The error code 19 occurs when data in the registry for the device and its driver were damaged.

  For more information on this error, follow the link below:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  () Also applies to Windows 7 as well ()

  http://TechNet.Microsoft.com/en-us/library/cc772156 (v = WS.10) .aspx

  Additional information:

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward and restore the registriesry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• DVD device driver is missing

  When installing Windows 7 from a DVD, after loading files, it asks a missing device driver. How can I live without these hassles?

  Ways in your installation media are damaged or corrupted. Try to download a new copy.

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• I have a Vista system and my cd/dvd device driver is corrupted or missing (Code 39).

  How can I recharge the device driver? Whenever I have to uninstall the driver and the system tries to install the driver, I get the message that is damaged or missing.  How to solve this?

  I tried deleting the cdrom.sys file in windows, but it won't let me even if I'm on the administrator account.

  I also tried driver uninstall with the installed drive and rebooting, but the corrupted message driver happens every time that I reboot.

  Is it possible that the drive itself is the problem?

  I'm ready to get an external cd/dvd drive.

  Try running the Fixit from here:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  "Or you can try the procedure in.
  Fix it myself

• Windows Vista will not install device driver for Palm Centro

  My PC Windows Vista can't find info from device driver to install my new Palm Centro.  I downloaded the latest version of the Palm software.  Any ideas?  Thank you!

  What version of Vista you have?  32-bit or 64-bit?

  64-bit cannot sync via a cable - only via a wireless (BlueTooth or IR) method.

  Wyrenut

  
  

  Message relates to: Centro (AT & T)

• Windows 8.1 - T530 - Base device driver missing!

  Hi guys,.

  Worked to solve this missing in my T530 image for a few hours now base device driver. I searched a lot and saw the many threads about this problem. I tried all the solutions, I came across but nothing has worked so far.

  PCI VEN_1180 & DEV_E822

  Form what I know, this must be a Ricoh card reader driver. I think I tried like 10 driver Windows 7, Windows 8, 8.1, 32-bit and 64-bit Windows and nothing has worked so far. Also tried driver card reader chip.

  All Windows Update are installed at the moment.

  Any idea to help me?

  Best regards

  Finally, found a solution!

  Been to the Microsoft Update Catalog and sought VEN_1180 & DEV_E822. Found something, did not work. E823 have searched and found a driver finally works!

• CD/DVD device driver not loading / use / recognition discs when inserted (Code 19)

  Here is an explanatory text, but the question is how is it resolved?

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Windows 7: A cd to dvd device driver I'm missing?

  Excuse me..

  I have problem with win7, the problem is that after the victory to Flash successfully make my bootable flashdisk, then I plug the flashdisk on my 110-3500 HpMini, but after starting Setup win7, a box pops - up and theres something written there that "a required cd/dvd drive device is missing... blah blah..." Is there something wrong with my HpMini? I tried to cancel the program installation and then re insert it to another usb port, but it did not work... Please help me sir... Sorry for my bad English...

  The wireless switch is on the front on the right side in the opposite of the power switch position.

  Windows Dvd installers are much more likely to become corrupt than ISO files or installers of USB. They are not indestructible and are best kept in a DVD box for safekeping.  All it takes is a simple scratch on the label of the DVD side and toast.

  Disc info you provided are identified as a Western Digital Scorpio Black SATA2 320 GB hard drive. What is the product number and the name of the product of your mini?

  Best regards
  ERICO

• HP ay503tx: problem of charges windows installation error - no device, driver cannot see HARD drive

  I bought the HP ay503tx model that came with the BACK. I downloaded windows 7 x 64 ISO and I got the license with me original. But when I try to install windows 7 via USB it won't let me.

  After the boot from USB, it get up to page that says that windows install. and when I press install, it throws an error 'no driver device found ". I can't see any HARD disk where to install fresh windows.

  I saw a lot of solutions such as if we were trying on USB 3.0 etc, but nothing helped. Please help me.

  Hello:

  On the PC with the Intel Skylake chipset like yours, there is no support USB2 and the W7 installation media has no the USB3 support, so you are between a rock and a hard place.

  The solution that works for most is to use the tool below to integrate the drivers USB 3 of your installation drive of W7 USB flash media.

  There are instructions in the readme on the link below to learn how to use the tool.  It should be run on a PC with W8.1 or W10.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

• Lenovo y530 Windows 7 installation cd/dvd driver problem

  Hello everyone!

  I'm a happy user of Lenovo y530 bought with MS Windows Vista Home Premium. I have easy access to your MSDN AA software. It allows me to download and install Windows 7 Professional for example. I downloaded the image, tested on virtual machine and it works fine. So I decided to install it directly on my hard drive for portable computers. I burned a dvd with a possible minimum speed and here I had a problem. It starts very well, I choose the language and locale, but after she, I have information that there is a missing cd/dvd driver. Installer wants to give me a file location.

  I don't know what driver is needed. I downloaded files related to my Optirac drive but they are all exe and it does not accept the installation program. Could someone help me?

  I searched many forums, but there is no ansfer of satisfaing I can't use USB key to install it.

  I also tried another DVD to burn, another Windows build - and the result was the same.

  Edit: have you tried with another order of start (CD 1) - with the same results

  The response was quite strange for me. I tried a DVD + R instead of DVD - R disc and it works