Device fingerprinting and the question of the double-homing

Similar Questions

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0

• Phone lost my fingerprints and the password after taking battery

  Hello

  I have the 4.1.83 of charge, has been empty since it was released. I just signed up for this forum and turnned off my phone to get the serial number behind the battery. Once I new turnned on I found that my fingerprints and password locking were gone and I need to reset. This seems to be a bug. I just wanted to inform the moderator.

  Thank you

  Dave

  Just found out that the fingerprint was not lost. It seems that the screen did not close when I pressed the power button until I have reset the digital PIN.

• Reader of fingerprints and the mouse touch pad drivers

  I have a Dell Vestro 3750. When I've been updated to Windows 8 I asked me to uninstall to move forward. Now, I want to install their return. Do know how to do it.

  Hi Mary,

  Thank you for choosing to ask your question in the Microsoft forums.

  You want to install the fingerprint reader and mouse drivers touchpad on the computer of Windows 8.

  If you use 64-bit of Windows 8, then check out the link, choose Windows 8 64-bit in the drop-down menu and download the drivers and install them.

  http://www.Dell.com/support/drivers/us/en/04/product/Vostro-3750

  If Windows 8 on your computer is not 64-bit then download drivers Windows 7 32 bit. You can install the 32-bit drivers on Windows 8 by using compatibility mode. Follow the steps.

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for Troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click run programs made for previous versions of Windows

  (e) click on Next, select not listed. Click Next

  (f) click Browse and select the installation program that you downloaded via the link above.

  (g) click on Next, click program troubleshooting

  (h) check the program worked in earlier versions of Windows but won't install or run now

  (i) click next , select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next

  To resolve the problem with the fingerprint reader, I suggest that you contact Dell support. Check out the link.

  http://support.Dell.com/support/index.aspx?~CK_=_pn

  If you need more help, then we let know.

• Qosmio X 500-12 q - reader of fingerprints and the Webcam disconnects

  Hello

  I have a Toshiba Qosmio X 500-12 q since its release and I have a problem: the webcam and fingerprint reader disconnects all the time, I'm always having to reboot to reconnect. It is particularly troubling for the webcam. I hope to find a solution to this problem...

  Thank you

  Hey Buddy,

  When this happens exactly? Have you started several applications they need for example like Skype webcam?

  Did you installed an additional firewall that blocks something on your computer?

  Don t know why it happens, but you can also try an update of the driver for the Toshiba page:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

• Break into pieces and the doubling of files

  The songs on my ablums are spread out and taken into double. How to make back in the sink?

  Hello

  ·        What application are you using to play the song?

  ·        You did changes to the computer before the show?

  ·        Are you referring to the applications or any specific windows library library?

  If you use Windows Media Player, and then follow the steps in the link and check if this may help:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/en-us?EntryPoint=lightbox

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• API Key, device id and the token of the device

  Where can I find this information?

  Hello

  Here is the article that we will answer all your questions on how to request and use the DPS2015 API to content producer: integration with Adobe Digital Publishing Solution

• dv2762tx-> problems with fingerprints and the mouse wheel.

  Hello

  use a computer hp pavilion dv2762tx laptop and my fingerprint sensor digital and my mouse used work.pls help me with this wheel.

  [Topic has been edited to clear]

  It seems that you have not installed drivers for touchpad too. Download and install:

  ALPS TouchPad driver here

  All Vista driver s for your model, you can find here.

• Satellite A200 - 19K: double keyboard lights up and the mouse no longer works

  Hello

  I just brought a notebook a200 19 k and the double keyboard lights up and the mouse no longer works.
  I can't find why it does this in the manual and what is the purpose of light with symbols on it.

  The symbols have a purpose. Thank you very much

  Hello

  As far as I know that not all mobile A200 were shipped with this function called TouchPad/Dual Mode Pad touchpad

  The dual-mode tablet buttons provide many different functions such as:

  1.) button to -> it toggle cursor mode and the mode button.
  When you switch the button mode button flashes blue and the mouse does not work

  (2.)-> volume button increases or decreases the volume of the speakers and headphones

  (3.)-> e-mail button starts you mailbox to receive and send emails

  4.) button ConfigFree -> starts the ConfigFree tool

  5.)-> Windows Vista Photo Gallery button starts the Windows Vista Photo Gallery

  The other three buttons to the bottom of the trim can be configured with different functions.

  Please refer to the properties for pad synaptic dual for more details!

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get the name of the bluetooth device and the name of the bluetooth device address device class?

  Hi all

  Can I know how to get the bluetooth device name and the name of the bluetooth device address device class?

  Example:-if my bluetooth device address is :-98:EB:CD:01:1F::90 then how do I get my bluetooth device name?

  I hope you understand my problem. Let me know as soon as possible.

  :

  Thanks for the reply.

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• Sync problems Xbox 360 wireless receiver for Windows and the controller (Windows XP, SP3)

  I'm having trouble connecting my controller to the wireless receiver. I use XP, Service Pack 3, 32-bit. I read dozens of help sites for help, but none has my same circumstances. The most common suggestion was to look at the driver for the receiver appears as a device not recognized. I checked the Device Manager and the receiver is recognized and does not appear as device not recognized. My controller does not appear in Device Manager as a new group named Microsoft Common Controller for Windows class, on Xbox 360 Controller for Windows. My controller syncs perfectly with my console, and functions very well also. I also downloaded the file Microsoft Xbox 360 accessories of the Microsoft hardware Web site, such as recommended by many establishments but do not know how file functions. A last help, my receiver is genuine and not fake with the XBCD holographic logo.

  Hello

  See the link to the Xbox support forums:

  http://www.Xbox.com/en-us/forums

• Why a cartridge is empty and the other is full

  I bought a new HP 2050 3 in 1 printer, scanner and copier just 20 days back

  Uptill now I took print out of trouble 10 pages and that, for text of the black text pages and a few lines of color

  But today I let myself be LED flashes and when I saw the ink level. one of the cartridges were almost empty

  

  kindly can u tell me at what is the empty.is that it color or black

  How can I manage both are also used

  Thank you (photo attached)

  moonnightingale wrote:

  Thanks for your response

  Is it possible that when I print with HP2050

  I tell the printer to only use the black cartridge

  and whenever I need to use color, I said to use both

  If I don't use color to let suppose that 10 to 15 days, will be the cartridge are blocked

  After how many days should I take at least an impression using both cartridges so that they are not blocked (someone has told me that if you use a printer for time longet, the cartisges will hang or something like that... is true tht)

  Thank you very much

  Select the printer and the double click on cick above and then select Customize your printer. See the following image. I pointed out where to select color or grayscale (black & white).  I suggest to use the tricolo and black cartridges.

  Until someone told you about how long before the problems? All I can tell you is that you better keep them fresh cartridges in your printer to avoid problems that happens. Use your best judgment.

  Best regards

  ERICO