Device Manager no id'ing not one of my drives

Similar Questions

• Device Manager says mmc cound not create a snap and some of my programs say the version of this file is not compatible with the version im using... This includes guest

  I recently bought an accelerator of ssd for my computer, and it bugs a few times so I have to remove and then some of my files have been corrupted, so I uninstalled a few programs, when I reinstalled them this error, im using 64 - bit, and I used to play this game in w / the ssd accelerator.now I can not, I tried to check my device manager and it does not load tried to use cmd and same error message appears, "the version of the file...". "Please help me. How can I solve this problem? I tried dxdiag too, back then when I use 64-bit it works normally, now it doesn't.

  I tried to do it in safe mode so I can use sfc/scannow, but safe mode is stuck at loading.

  Hello

  1. What is the exact error message you get?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to run the checker system files scan as an administrator and a Coachman.

  (a) click on Start

  (b) type CMD on the Start Search bar

  (c) in the list, right-click on CMD , and then click run as administrator.

  (d) a new DOS window opens.

  e) Type sfc / scannow

  http://support.Microsoft.com/kb/929833

  Method 2:

  If the problem persists, you can start the computer in a clean boot state. Clean boot helps eliminate software conflicts.

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and let us know if you need more assistance.

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Blue indicator of Win 7 circle network ALSO hang Device Manager and MSE does not

  I have a strange problem since the recent windows updates.

  Indicator of network in the bar tasks displays a blue circle for about 20 minutes after I start the computer. During this time I can't run regedit, I can't open the Device Manager, and I can't seem to activate the protection in real time to Microsoft Security databases. However all the time I have internet and network access.
  After about 20 minutes the light will come back normal (sometimes it goes through a Red Cross first), date at which the computer then runs everything normally, if I have my phone on, I get the auto run screen, Device Manager works and I can also start MSE.
  It's as if the computer is waiting for something to happen. Device problem? However, all devices appear to work normally.
  The latest updates, I made were optional for monitor HP and Microsoft mouse and a keyboard, both of which work well in the era of 'blue circle '.
  I also tried updating the adapter software.
  It is not important, but it's annoying!

  Hi Carmen,.

  The blue circle on the network icon indicates that the system is looking for a network connection.

  If it appears at the start, then start the modem and the router before you start the computer.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Step 1:

  Check if the problem persists in safe mode with network.

  Check out the link:

  Startup options (including safe mode)

  http://Windows.Microsoft.com/is-is/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

  Also check the link for more information:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=_dBb8lcqecd

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• After the upgrade to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit), I can see my second hard drive in the Device Manager, but I am not able to access it in the Explorer... How can I fix it?

  How can I access my hardrive second in windows Explorer after I have updated to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit)?

  Go to disk management and assign a drive letter to the drive.

• Inspiron 3847 downloads something not one operating system driver

  Under drivers & downloads, OS has link to download a Windows Recovery Image downloading files for Windows 10 for my mentioned computer.

  Having an ISO is a good thing.  It must be stored on an external hard drive so that you can recover years from now when the original drive dies.

  This is not a case if they die is just a matter of time.

• MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only

  Hello

  I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MAX tells me that it is one of the instruments GPIB installed on the computer which GPIB0 - USB-GPIB-HS. Do you know what is the reason to do this, because I want to use a multimeter in LabVIEW via GPIB, but I can't access it, I don't even see that there is a GPIB connection in the computer (in LabVIEW).

  Kind regards

  Alejandro Rodriguez

  It's the kind of old. Have you tried the last?

• Pavilion dv6-6c53cl: dvd player not working not not after restoring - all missing drivers, does not appear in Device Manager

  Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box.  The dvd drive no longer works.  When you put a CD, you can hear him swirling but the screen does not open.  In addition, in the Device Manager section, dvd is not listed.  I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).

  I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it.  Clearly, I don't know enough about computers.

  In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that.  Obviously not used often.

  You can provide any help would be greatly appreciated.  The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little.  The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist).  Thank you!

  You may consider replacing the internal DVD player or using an external DVD burner.

• HP Photosmart C4580 all-in-One: the hp Device Manager

  I recently moved and wireless printing is no longer available, because I have a new router, etc. I'm trying to go through the steps to get my printer to print wireless again. I started with the (difficult to understand) online books and forums, but I encountered a problem.

  A step now asks me to open on my Mac HP Device Manager, but I do not have this program. I guess that it has deleted along the way. Where can I download to continue to implement the capabilities of my wifi printer?

  Thank you!

  Hello @joyandlady,

  Welcome to the Forums of HP Support!

  I would like to help you today with the configuration of your HP Photosmart C4580 all-in-One printer to print wirelessly with your computer Mac OS X 10.7. The Device Manager is a feature of the Windows operating system. I don't know why you got a quick for you going into the Device Manager, but it is not possible for your Mac operating system. Now, because of the age of your unit HP Photosmart there is no downloadable HP full feature software or driver for your printer in Mac OS X 10.7. Therefore, you rely on an update from Apple to install printing and scanning of the capabilities of your printer on your Mac. For this reason, you are not able to perform normal wireless setup wireless for your printer configuration is done via the installation package. For this reason, we have two options.

  Option 1: Install the printer on a supported operating system and run the wireless installation. Once the wireless feature is successfully configured you simply (+) add your printer to your Mac OS X 10.7 for printing and scanning.

  Your printer has a pilot full of features in favor:

  • Mac OS X 10.4
  • Mac OS X 10.5
  • Mac OS X 10.6
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8
  • Windows 8.1

  These operating systems listed will allow you to easily configure the feature wireless on your printer.

  Option 2: Run an Ad Hoc of the wireless installation. This can be a bit difficult. To set up your printer through the Ad-Hoc connection, please follow the steps below.

  1. Let's start by you information computers Mac network gathering because we will need shortly. Go to the Apple and select System Preferences

  2. Select the network

  3. when the network window opens, choose Airport (or Wifi) on the left side:

  

  4. click on the button "Advanced" at the bottom on the left.

  5. Select the TCP/IP tab at the top

  6. take note of the IP address of your computer that we need to reference later

  7 enter your subnet mask and the numbers of your router (default gateway) , because we have also to those too:

  

  8. close the network window.

  9. click on the icon Wireless at the top of your Mac on the right side:

  

  10. connect to the network that appears with your HP C4580 inside.

  11. on your printer wireless light should go solid after a few minutes. At this point, you want to print a Network Configuration report.
  

  Print a Network Configuration report using the button Wireless on the product, press the grey button until print a Network Configuration Page is highlighted, and then press the Green button. A Configuration page prints, including the IP address you need to the next step.

  12. the Network Configuration report new take the new IP address 169.254.xxx.xxx and open your Internet browser.

  13. your Internet browser will not load a real Web site, because you are not on the Internet right now:

  

  14 take your new 169.254.xxx.xxx IP address and enter it in the address bar of web page anyway and go to this site. Do not include the www.

  15. click on the Networking at the top tab:

  

  16. Select connection on the left hand side

  17 select Wireless at the top and then Advanced:

  

  18 type your SSID (your home or business Internet network name)

  19 select Infrastructure

  20 choose your encryption. He will already be WEP or WPA (you may need to ask your internet provider if you don't know what yours is)

  21 type your network (password/password) in the field below WPA or WEP key, one that corresponds to your type of encryption that is given to you by your internet provider.

  22. click on apply bottom-right:

  

  23. on your Mac , click the Wireless at the top:

  

  24. reconnect to your normal Internet

  25. go to Apple - System Preferences - select print and scan

  26. click on the Plus (+) button to add your printer Hello

  Now that your wireless printer is added, please test printing.

  Please reply to this message with the result of your troubleshooting. If you prefer to run the installation Wireless under an operating system that is supported, please let me know which operating system you use, and I can guide you through these steps. Good luck!

• Satellite L350 - not visible in the sound card device manager

  Satellite L350 model: PSLD8E
  OS: Vista 32 bit SP2

  Hello

  Cannot install the drivers for sound card and audio device is no longer visible or detected in the vista Device Manager. Tried Realtek drivers toshiba download and disk but still no sound or device after reboot.

  its my dads specifications and he says its just stopped working. When I checked initially, the audio device was reported as driver problem in Device Manager. Remove and try to update the driver, no audio device is no longer only show.

  is it possible that the audio device of the motherboard is loose or defective? Toshiba provides software diagnostic tools to check equipment?

  UPDATE:

  I looked through the windows event logs and discovered several error messages indicating that the PNP device to realtek sound was unexpectedly disconnected.
  don't know if this is due to problem hardware or driver updates.

  Thanks for any help,

  Hello

  Have you tried to update the audio driver of Toshiba page? If she's not always you help, backup all files needed and do a clean install of Windows. Otherwise, it takes more enough time to understand and resolve what the simple installation of Windows and users of the Toshiba forum for the right answer pending. Reinstall it and see if the problem still occurs. The dysfunction of the material is also possible.

  Welcome them

• Satellite Pro 6050: WLan controller does not seem to be in Device Manager

  I'm a novice guy with computers.

  Well, I re-formated my laptop and re-installed all the drivers, but my wirless lan controller does not seem to be in my device manager.
  I was just wondering, if the driver needed to be installed in a certain order. I also had my add on the Vodaphone mobile card plugged into slot on the side that would make a difference?

  in any well any help would be great
  Dane :-)

  Hello

  As far as I know that the WLan card was optional on this unit. In this case, if you bought the device with wireless network card that WLAN should appears in Device Manager. But if you bought the laptop without the WLan card you won't find it in Device Manager.

  PS: The recovery CD already includes the WLan driver and you don't need to t in addition no driver to install.

• Satellite A500-17 x - wifi does not work - not found in Device Manager

  Hi people,

  I need help please.

  My wireless adapter does not work.
  It worked perfectly until I connected to a wired connection in a hotel I was staying in and since then I can not connect to my wireless router.

  I tried restoring the tosystem several times to old dates, but it has not solved the problem. When I restart the computer laptop and go into devices and printers, I thought that the computer needs to be troubleshooted.

  The program runs and try to install the driver for the Wlan but returns with errors. Namely, windows could not load the driver or can verify the digital signature.

  There is also no icon in the network for lan wlan connections only. When I use the radar in connectivity doctor tells me that the WiFi network is disabled but I can't understand how to activate it.

  When I start in safe mode and go to Device Manager I see the wireless network adapter, but when I try to install the driver I leave safe mode and restart. I did and then the WiFi network is displayed in the Device Manager but when I try to load the driver, I thought that the driver is updated and then the adapter disappears from the Device Manager.

  I'm so frustrated at this point and I'm very close to a full erase and start over.

  I also tried to reload and load the default configuration settings in the installation program, but didn't make any difference.

  My laptop is a Satellite A500-17 x with windows 7 64 bit.
  The WiFi network is Realtek RTL8192E Wireless Lan 802.11 PCI - ENIC

  Hello

  Go to BIOS (press F2) and set it to default settings.
  Save the changes and restart the device.
  Then try to reinstall the WLan driver again.

  If that does not help, download the most recent and updated BIOS to BIOS first day.
  Then, restart the device and try reinstalling the Wlan driver.

  Last but not least you could test the WLan feature on laptop running with factory settings current (after using the Toshiba Recovery)

  PS: in order to use the WiFi network you must use the FN + F8 key combination and must turn on the WLan (in front of the laptop) switch to position.

• IHAVE XPPRO my Device Manager indicates that I can not use my Logitec wireless mouse quote 10 what is the code that.

  My Device Manager will also accept not my wireless keyboard I have logitec

  Hello

  You can check this link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Vista Home Premiun Device Manager does not display my CD-ROM/DVD-ROM drive

  I recently tried to use my CD-ROM/DVD-ROM drive and it did not work. It was working fine a few days previously but now... Nothing.

  My first reaction was to open Windows Explorer, expand and look at computer. There was my C drive and the recovery Partition but no Opitical drive more.
  Then I opened the Device Manager and saw that the CD was registered it is more as well?

  My question is

  Vista automatically removes the CD-ROM drive in the list of Device Manager if there is a problem with the drive itself?

  Or is there something that happened this suppression the CD-ROM in Device Manager list and it is not a problem with the drive itself?

  I had a disc go bad before on a PC running Windows 98 and 2000, but the disc stayed in the Manager list but I'm pretty new to Vista and know things are very different. So before we get in panic Mode, I thought that it would be a good idea to ask where someone will know probably for sure.

  Thanks in advance for clues

  Len

  Hello

  1st try a restore of the system if you have a point of return before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------

  If no joy:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• my sex cam dell vostro 1500 is not working or projection in Device Manager

  my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

  I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

  I am using windows 7 ultimate.

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">