Device Manager remotely using Compmgmt.msc Cannot Connect to Vista Edition family of XP

Similar Questions

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I don't see any devices listed on my device manager, its empty, I am running windows xp home edition

  I tried to install Desktop PCI adapt (D-Link), but it could not install. just my PC could not see. I went to the Device Manager to see what the problem is, but I couldn't see any device in the Device Manager tab. It was empty. I don't know what went wrong or what I need to do.

  Thanks in advance

  Hi Mohammed,.

  I have encountered this problem before. Visit this page and it will explain how to fix it.
  See you soon ~!

• What is the best way to disable Device Manager to correct the State of sleep in Vista

  I understand that the box peripheral to allow my PC Manager stay in State standby, as suggested in the help of the VICTORY of compensation

  could fix my PC, but there are 16 listed different USB files and I don't know if I should delete all.

  I erased the CB modem but the PC wakes up from his sleep in a min. after clicking on sleep. Any help? Thank you

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658
  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• Request remote assistance issues. Cannot connect, check network or group may have cancelled etc.

  I have XP, Vista and 7, customers have.  Remote Assistance allows to work with both.  Now, it will work with either, but it does not work with one of the users with 7.  Help, I tried everything.  A few months ago I could access it, now I can't

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the accurate and complete error that you receive when trying to use remote assistance?

  In response to the questions above could help us help you better. However, you can have a look at the following article which deals with a similar question.
  Remote assistance may not work if Internet Connection Firewall is enabled
  http://support.Microsoft.com/kb/310608

• HP Pavilion Notebook 2247 g7: using Windows 8 - cannot connect wireless rt3290

  According to the Windows Compatibility Center RALINK rt3290 wireless driver is not compatible with Windows 8, I guess that this computer has been upgraded to Windows 7 to 8.  The computer belongs to a member of the family and seems to last 6-8 weeks is therefore more able to turn on the WIFI.  After several hours to review all the options available, I went to the Windows Compatibility Center to find that the rt3290 is not compatible with the Windows 8 operating system now on this laptop.  Y at - it a bet on day of the rt3290 to make it compatible driver or another wireless driver that can be installed to allow internet access via a pilot wireless that can be downloaded or is it necessary to connect to an external wireless router to get connectivity?  I have the opportunity to use my computer to download a compatible driver to a flash drive and then upgrade or install on HP laptop.  Someone else has solved this problem with their computer compatibility to the rt3290?

  Thank you in advance.

  Hello:

  G7-2247us came standard with the W8.

  There are W8/W8.1 drivers for this card is compatible with the W8 and W8.1.

  Try this driver... it is the most recent to W8 from HP.  It is much more recent than the one on the support page of the g7-2247.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

• Cannot connect Windows Vista

  I tried to change my password, my Acer Aspire 5100 laptop, did not recognize the password. I just connected, so I restarted my computer. It does not recognize the password, I know my password. I didn't save my files. PLEASE HELP ME

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner

• BlackBerry Smartphones cannot connect with Vista

  BB Storm 9530 - Version v4.7.0 wireless

  Windows Vista Ultimate x 64 SP1

  I can connect is more to my Storm via USB. I tried to reinstall the Software Desktop Manager (4.7.0.32) several times without success. This is the message I get:

  

  I have had no problem connection previously. Since the update of Windows and Office two days ago, I was not able to connect. Any help would be appreciated.

  Thank you.

  I don't know what the problem was but the removal of battery will do. Thanks a lot for the tip...

• With the help of Windows Vista Edition family and unable to connect to the Netgear router.

  No matter what patches I try, I still, I get a message error "settings saved on this computer for the network do not match the requirements of the network. Two other latops under Xp and Windows 7 connect perfectly.  The user called Geeksquad who told him it was the router. Replaced the router and the same issue. This default laptopp local only access point. Fix regedit for broadcast and Fixit file downloaded here have not solved the problem. Have you tried to push the direct connection button on the router, change the network connections settings... everything. Nothing works. Help, please! The user of this laptop is uber frustrated. I don't know what else to do.

  Geek Squad - use if you do not want necessarily fixed it - but you like overspending for no reason.

  Sounds like a bad driver/software.

  What is the wireless network device in the system in question (I hope that something like Intel...?)

  Is the latest software and drivers from the manufacturer of the device (don't not relying on Microsoft)?

  May need to remove all network components, reset it and install the latest drivers - and if you think Geek Squad would do that...  They could - if you get a child who loves really networking of their own things at home - but the odds are against it.

• How to Access Manager for devices in the Windows 7 Ultimate Computer of the Microsoft Management Console (mmc) or Windows XP Professional computer using the computer (compmgmt.msc) management?

  I want to access Device Manager on a Windows 7 Ultimate remote computer from a computer running Windows XP Professional.  Whenever I have use (compmgmt.msc) computer management and access the remote computer, I connect successfully to it.  But when I select the Device Manager it says: 'access denied '.  I checked the security policy (secpol.msc) and I chose the deny access to this computer from the network and there no users and groups listed but it says that its default value is invited.  Can you tell me the step by step procedure?

  Thank you.

  In addition to changes to the GP, you must also do the following.

  Open services.msc, locate the "Remote registry" service, start the service and set to start automatically.

• Cannot connect my BlackBerry 9700 with Windows.

  Original title: Divece driver does not

  Hi, I have a Blackberry 9700. I tried to connect it to my PC, which runs on windows Vista (also another one that turns under W7) and know it has no driver. and can not find a. Also tried several times to download as remove that to redownload the file of the driver from the website RIM still cannot find a driver, even thought that he integrates the latest version, and still claims the CD which is not included in any pack 9700.

  Please send me some answear because I'm going nuts.

  Hello
   
  
  1. How do you try to connect your BlackBerry to your computer? You use a USB cable or via Bluetooth?
  2. could you give us the exact error that you are experiencing?
  3. What is the status of this device in the Device Manager?
   
  See the links below for help on Device Manager.
  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  
  Method 1.
  Check if there is no driver available for BlackBerry 9700, through Windows update. You can also try to update this device in the Device Manager.
  You can also check the items below that explain to update hardware drivers.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  
  Method 2.
  First of all, you need to install the BlackBerry Desktop Software from the link below and then try borrowed the BlackBerry with your Windows computer using the USB cable. Navigate on the following link and in the dropdown choose the first option:
  BlackBerry Desktop Software version 5.0 Service Pack 1 and then press next and download it. Install this software and check if it works.
  https://www.BlackBerry.com/downloads/browseSoftware.do
  Here is the alternative link to download the software above.
  http://NA.BlackBerry.com/eng/services/desktop/
   
  Here is the support page for desktop software:
  http://NA.BlackBerry.com/eng/support/software/desktop.jsp
   
  You can also download the e-guides for your BlackBerry for more information.
  http://docs.BlackBerry.com/en/smartphone_users/subcategories/?usertype=1&category=BlackBerry+smartphones&subcategory=BlackBerry+bold+9700+series
   
  This is the homepage of support BlackBerry:
  http://NA.BlackBerry.com/eng/support/
  
  Important note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BT stack install fails - RFBus error-10 in x 32 Vista Device Manager

  Hello

  the Toshiba Bluetooth Stack 5.10.1 Installation fails with my laptop another installed Blutooth 350 Module manufacturing.

  The Bluetooth RFBus driver is marked as error 10 in Device Manager.
  Is that what all I could test/edit to make it work?

  Concerning

  Robert

  Hello RobertHerter,

  i 'don't know what is your model of laptop, but try this:

  -First remove the old version of the battery installed bluetooth - with wireless on

  [Remove battery Bluetooth]

  - Command line:

  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / SB

  - Manually:

  Start the Setup Bluetooth Bluetooth-stack or
  Use "Start-> Control Panel-> Add / Remove programs->.
  Bluetooth Stack for Windows by Toshiba ".

  -Reboot your laptop

  -Make sure that your wireless network is enabled

  -Install the the right version for your notebook - vista 32bits (Bluetooth Stack 5.10.01 Windows 2000 / Windows XP / Windows VISTA)

  -If you have not yet any reboot error.

• Just bought a Macbook Pro of 2012-era and cannot connect with my Apple ID. Thoughts?

  I recently bought a Macbook 2012 used Pro and cannot connect to iCloud, App Store, iTunes with my Apple ID on the computer. I can not connect with my ID on my iPad and iPhone and Apple's site, however. I am running the latest version of El Capitan.

  What gives?

  Is this computer associated with your Apple ID?

• No output device and no sound card in Device Manager

  Hello I installed today on my Acer 7520 G laptop Windows7, I was pretty happy with it much but I have 1 problem.

  The arrival of the installation I had sound, but after windows updated itself the next time I got this done installed peripheral No. output message, I tried to reinstall the realtek drivers but no use, things to make it even worse, I can't find my sound card device in DEVICE MANAGER, it is as the sound card missing I had this problem on my Vista as well, but it worked after doing the system restore. Now even System Restore does not work, and I doubt that it is a hardware failure.

  I tried refreshing and looking for changes on the hardware in the Device Manager, no use. S

  Kind regards.

  Hello Fafarona,

  Can you tell what update may have caused the problem with your sound?
  Did you try and update your sound card drivers again after updates?

  You can try the following link: http://support.microsoft.com/gp/no_sound/

  It has an automatic FIXIT who could help restore your sound. It does help more sound issues.

  Answer please come back and let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think