T110 II - Windows 2012R2 Storage Pool corrupts every reboot

Similar Questions

• Windows 10 resets associations PDF every reboot

  I have several PC that will reset PDF associations on BOARD whenever they have restarted. I reinstalled Adobe Acrobat several times without success. I had to manually re-associate the files every time that happens. It is at the origin of the major problems with the company's software as it exports PDF Forms data. Whenever this reset happens that these associations no longer work.

  Before ask you, yes I used the built in windows via the settings menu file association to solve this problem, but it keeps happening again.

  Any help would be great.

  Hi ihnaer,

  Open Acrobat, navigate to the Edit-> Preferences-> General-> click "set as my default PDF Manager."

  Click OK to confirm the changes.

  Now, try to reproduce the problem.

  Kind regards
  Nicos

• try to install the storage pool. Windows 8 does not recognize disks external wd 2

  I go to the storage space and try to create the pool.  Windows 8 does not recognize my 2 external drives of 2 TB wd.   I can load files and cannot get the readers in the Explorer of files, but could not create the storage pool.

  The following site can help you create a storage pool:

  http://www.bleepingcomputer.com/tutorials/how-to-configure-storage-spaces-Windows-8/

• How to create the new storage pool?

  Hello.
  I am running windows 8 and I wanted to create a new storage pool for my personal files. but how?

  I have only 500 GB of storage.

  current storage pools:

  OS (C :) - 460 + GB)

  Lenovo (d) - 20 + GB

  Thank you!

  Hi Jerome,

  Yes, the statement means that you can use an external drive such as a hard drive or a USB drive as a storage drive. What you need to do is plug in the hard drive, go to start screen, type storage, click on manage storage. Click on create a new pool and storage space , and then follow the instructions on the screen (as shown on the link provided on the previous answer).

  Alternatively, you can also create a new partition of the hard disk volume. You mentioned that the operating system drive is 460 GB and drive "D" takes 20 GB (or more). What we can do is to create a new simple volume on the unallocated disk. If there is a disk unallocated space, we will create a new disk by taking the amount of disk space required on the unallocated disk space, and then use the new disk in what concerns your personal files.

  First of all, check if there is a disk not allocated/available in disk management. Follow these steps:

  • Press Windows + X , and then select Disk Management.
  • Check if there is a disk unallocated with readers. If you do not have a disk unallocated, then right-click on the drive (the operating system or drive "D") and select Volume Shrink.
  • Now, you'll find a disk unallocated in the lists. Click on a region unallocated hard disk, and then click New Simple Volume.

  • In the New Simple Volume Wizard, click Next.

  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum default size, and then click Next.

  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click on Next.

  • In the dialog box Formater Partition to format the volume with the default settings, click Next.

  • Review your choices and then click Finish.

  • Now a new drive will be created and it will be displayed in the file Explorer.

  Check if it solves the problem.

  For reference:

  http://Windows.Microsoft.com/en-CA/Windows/REPARTITION-hard-disk#1TC=Windows-7

  http://Windows.Microsoft.com/en-CA/Windows/create-format-hard-disk-partition#create-format-hard-disk-partition=Windows-7

  Please keep us informed on the issue.

• My Windows Media Player is corrupted. How can I solve this problem?

  Original title: H E L P

  my windows media player is corrupted, how to fix?

  You can download the latest version of windows media from microsoft.com player and then reinstall it should solve your problem.

• Windows 2008 storage server shows 0 KB file size

  We use Windows 2008 storage server standard with Service Pack 2. Now we are facing the issue is Some of PDF, EXCEL, DOC files show in size 0 KB file, we are unable to open this type of file, if anyone knows pl give me the solution

  Hello

  I suggest you to ask your question on the link mentioned below that this forum is best suited for your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I hope this helps!

• Windows KB2572067 for Windows XP security update shows every day. I'm updating, appearantly successfully and 15-20 min. trying to update again. How to solve this?

  Windows KB2572067 for Windows XP security update shows every day.  I'm updating, appearantly successfully and 15-20 min. trying to update again.  How to solve this?

  Hello

  Thanks for posting the request in the Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. the problem occurs for a particular update?

  Method 1:

  See the article and try to run Microsoft Fix it:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/en-us

  Method 2:

  I suggest you to see link and check if it helps:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Let us know if it helps.

• Windows media player is corrupted. I want to uninstall and reinstall but can't.

  Windows media player is corrupted. I want to uninstall and reinstall but can't.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  =================================

  Update your Codec - get these

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/
  http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ---------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows resource protection found corrupt files but was unable to solve some of them.

  I have several problems with my computer; I used to have Skype and I bought a new logitech camera, but since I installed it I can't update of java, adobe, yahoo, etc. so I uninstall my camera to see if it was the problem, but since I did that Skype has not worked agaain, an apears to error saying that there is a problem with the package windows install , I have read in this forum and find I had need windows install clean up utility so I downloaded, but did not work, when I used comand promp and scan my computer this apears

  Windows resource protection found corrupt files but was unable to solve some of them. Details can be found in CBS. Journal windir\logs\CBS\CBS.log. for example, C:\windows\Logs\CBS\CBS. Journal

  C:\windows\sistem 32 >

  can someone help me please! Thank you.

  HI Margaret,

  Thank you for your message.

  Looks like you have a virus or malware causing corruption.

  I suggest to update your Kaspersky Anti-virus definitions and run a full scan of the system.

  Also, make sure here's you have the Vista disc in the drive when you run SFC, where it gets the correct file information.

  Alternatively, you can try to perform a clean boot before you attempt to run SFC, to see if a startup program may conflict with it:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  Hello

  This should help you.

  You need to run as admin.

  "How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"

  http://support.Microsoft.com/kb/928228

  And if the problems cannot be fixed, you may need to do a repair upgrade installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

  I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

  I did several tests, including
  ping google.com
  to test if it is online and this proves that when its premises in sound mode now online
  I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
  my antivirus is AVG
  AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
  can anyone help
  ?
  original title: network adapter shows onffline but it is online

  Hello

  You can try to uninstall and reinstall the network adapter.

  To do this follow these steps:

  1. click on Start, in the Start Search bar type device manager and press enter.

  2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

  3 restart the computer once the uninstall is complete.

  4. after the computer restarts, it will automatically detect and install the drivers.

  5. check if the problem is resolved.

• sfc scannow windows resource protection found corrupt files but was not able to repair

  Original title: sfc/scannow

  Hello.

  I tried to repair internet explore in windows vista with the command prompt

  I've done sfc /scannnow and it gave me

  Windows resource protection found corrupt files, but could not too distressed some of them

  details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper

  for example c:\windows\logs\cbs\cbs.log

  I found them the corrupted files, but I have no idea on how to fix or remove.

  UH how to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  don't tell me no how to fix or remove.

  I have windows vista edition Home premium 64-bit service pack 2.

  Hey Crystal

  If they are difficult to pierce the CD to Windows Media Player 11 try these links below it should help them or at least show them in the right direction on how to burn a CD. Hope that helps some.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• The CD-ROM/DVD-ROM driver cannot be loaded by Windows and can be corrupted (Code 39).

  My DVD/CD driver drive HL-DT-ST DVDRAM GSA-T20N ATA Device cannot be loaded by Windows and can be corrupted (Code 39). How can I get the original device installed new driver if the CD/DVD drive does not work? It is available for download? Should it be first uninstalled and re - installed? A relative novice can handle?

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Update the driver for the CD/DVD drive and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Run the fixit for the following Microsoft Fixit and if it helps.

  Your CD or DVD drive cannot read or write media:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 3:

  Uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  Hope the information is useful.

• Windows file extension keeps opening every 2 minutes?

  Windows leader continues expansion opening every 2 minutes, I have like 8 windows open automatically, how do I stop?

  Hi JoeyMashike,

  (1) what is you receive the exact error message?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  
   

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Error 2738 - Windows Resource Protection found corrupt files

  original title: error 2738

  Windows resource protection found corrupt files but was unable to solve some of them.  Details are provided in convertible bonds. Logs\CBS\CBS.log.  For example C:\Windows\Logs\CBS\CBS.log

  Hello

  see if that helps

  Here's how to use the SFC command

  the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  How to analyze the log file, SFC.exe program generates the log file display

  The program SFC.exe writes the details of each operation audit and each repair operation in the CBS.log file. Each SFC.exe program entry in this file has a [SR] tag. The CBS.log file is located in % windir%\Logs\CBS.

  Note The Windows Modules Installer service written also in this log file. (The Windows Modules Installer service installs optional features, service packs and updates).

  You can search for tags [SR] help locate SFC.exe program entries. For this type of research and to redirect the results to a text file, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     type cmd in the Search box, right-click cmd in the programs list, and then click run as administrator.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Type the following command and press ENTER:
     findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  If SFC detect major problems, you may need to do a repair installation

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html