Device to reboot after the installation of the application

Similar Questions

• HP MS235 pavilion in a single reboot after the start screen guard

  Hi all.

  can anyone help wih this problem I have with my computer hp pavilion MS235 that keeps just reboot after the splash screen.

  What happens is that the system began to hang at start up. It would take about an hour to get to the Welcome screen. could not do anything even not to make a recovery, so I put the drive in another machine and he made a new installation. but since then it just keeps restarting to the start screen. I ran all kinds chech af, but nothing works.  I'm on win 7 x 64.

  Please can someone help! Thank you.

  Concerning

  Dave.

  Start at this page: http://support.hp.com/us-en/document/bph07143

  Or here: http://www.computersurgeons.com/SearchProducts.aspx?sbt=pavilion%20MS235&bkm=Results#Results

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• TouchSmart 610 1150y: No Audio output device is installed after the system recovery

  I recently experienced an issue that forced me to do a system recovery. I upgraded Windows 10 months passed without problem from 7. After saving, I did the recovery. The Beats Audio System will not work now and the system indicates device output Installed in no..

  I tried to download drivers without impact. I also uninstalled the audio controller (IDT High Definition Audio CODEC) via Device Manager and rebooted him the system. Doing so resulted in a warning on the unit triangle. When I try to download software updates for it, it starts to download the driver, and then sends an idicating error message that a driver has been found but the device does not work. The audio worked perfectly until I ran the recovery, so it seems not to be a hardware failure.

  

  Can you suggest a way to solve this problem or to diagnose the problem?  Thanks for any help you can provide!

  Mark

  Finally! I found a solution! A Google search for a Codec IDT pilot lost in Windows 10 randomly suggested another thread here on the HP Forum. After several suggestions, is affected:

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me collect a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Displays warning message, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.

  Perfect! Worked like a champ!  Problem solved... just took me two weeks to find.

• Error, call after the application of the phone through my application device

  Hi all

  1. work on the version of BB storm (9500/9530 Simulator) is v4.7.0.75

  2 opportunity BB JDE 4.7

  3 problems is the following:

  I am trying to invoke application of the phone device/Simulator for my application. I am able to launch and to appeal, but once I have cut off communication, the Dialer screen is coming, how can I avoid this Popup Dialer?

  My requirement is - I need to run the app phone, press the button and when we hang up the application phone

  should approach and return to my application where I put out the call.

  Here's the code I used:

  PhoneArguments phoneArguments = new PhoneArguments)
  PhoneArguments.ARG_CALL, strPhoneNumber);
  Invoke.invokeApplication (Invoke.APP_TYPE_PHONE, phoneArguments);

  Thanks in advance

  Ratna

  Hi all

  Above code snippets works very well. in my camera.

• Transition from tables to call a library function does not work after the application builder

  Call a DLL with function of library to call that requires a data table to work properly in Labview, but after building an exe with the application generator, the call no longer works.  Dereferecing the pointer in the DLL returns all values 0 and not the real.

  So finally figured it out.  It seems that you cannot use the utilities of pointer in an exe built such asGetValueByPointer.xnode.  Once I replaced the calls with calls to DSNewPtr and MoveBlock library, everything works as expected.

• 3 seconds delay after the application icon was clicked...

  I can't understand the following situation:

  When I I click on my blackberry application icon (in the Simulator), the application is fast, no problem. However, when I take that same code and place it on my blackberry, there are a few seconds of waiting time after that the icon has been clicked.

  can someone tell me how to reduce the delay? the first screen is nothing else than an image within an image field. I wanted to create a "splash" screen and I just show you a simple picture.

  After I click on the icon of the application (on my phone), I notice that there is activity because you see the arrows at the top right moving. but the user regular to non-techie, they do not know that the application has been started and they will just keep clicking on the icon over and over again.

  again, I click on the application icon and there are about 3 seconds just to show the image contained in the file of the project. If we're not going get the image from a remote site.

  the Simulator shows the quick image, but the phone creates a delay. any ideas how to minimize the delay on the application icon, click on?

  Thank you.

  CA

  I thought about it. I just moved the instantiation and several objects of a different class loading and later called these lines of code with an invokeLater method. My first screen contains only the image itself and the other class the rest of the code.

• In Windows 7, after the application of SP1, I can no longer access my phone book from the start menu or use the search function.

  I just applied SP1.  Until I applied this update that everything worked as I expected.

  Since then, whenever I type anything in the search on the start menu, there is no result.  The only exception to this is that if I type in a full path, for example "C:\Program Files\", how I get a list of files in that directory.  If I type in everything that is not a path, as for example the letter p or the word 'paint', told me that "no element not corresponding to your research."

  If I click 'more results', I get an error with a big red x box.  The legend is "search query: = paint", for example if I searched for painting.  The text is "Windows cannot find ': search query = painting '.»  Make sure you typed the name correctly and then try again. "I wasn't expecting this error box, but rather a window with a list of search results.

  I have downloaded and run the troubleshooter of research - Mats_Run.search.exe.  It tells me that no errors have been detected and gave me the option to reset the search.  I did this, then waited a whole day to search for re - index, but the results are the same.
  In addition, after reading a few other questions on the microsoft Web site, I've done different things which seem to as they should not work - I have turned me folder, active random registry settings options, etc..  Indeed, none of these things had an impact or shows something unusual.
  Also, I can access is no longer my home directory from the start menu.  If I click on my user name that appears in the upper right corner of the menu start, the start menu closes and nothing happens.
  There are a few other circumstances where I can't reach my directory.  For example, if I have an Explorer pointed toward a library, say "Downloads", if I click on my user name in the breadcrumb path, he will remain in the directory downloads instead of going to my home folder, as I expect.  Also, if I click on my user name in the Favorites list in the left pane of the Explorer, I would expect the Explorer window to access my home folder.  Instead, he remains in the folder where he currently resides.
  As I said earlier, before applying the update it worked as expected.
  Thanks a lot for your time!

  Hello

  Turn off or uncheck search in Windows Control Panel and restart the computer.
  After the computer restarts, place a check for Windows Search and restart the computer. Then find the issue.
  Reference: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

  Also please take a look at the article that could help you.
  The box "search programs and files" does not correctly display the search results in Windows 7 and Windows 2008 R2
  http://support.Microsoft.com/kb/977380

• Smartphones to blackBerry after the Application update the only language chosen is English

  Hello

  I just bought a Bold 9700 today.

  After installing the Desktop Manager (Mac) and hang the Blackberry to my Mac, I went to the Applications tab and installed a few additional applications. After the restarted blackberry the menu language is set to English (instead of German, like it was before), so I went into options to return to the German, but the only option is English.

  Did someone knows how can I get German as a language?

  Matt

  The problem ist that I don't have a PC, one a Mac, so updating the firmware etc does not work for me.

  I actually had a Trial Version of Parallels + Windows lying around, installed that, installed Windows Desktop Manager and then just reinstall Applications, now I can use the German language again. I still have no idea why, if I use the Mac Desktop Manager, it removes the German language files and even though I have check boxes to install them, it is not actually install them. I guess I'll just try not to use the Application Setup and everything will be fine... It all sounds pretty weird, but I can't find another solution.

  Thanks for your help guys if!

• To maintain the ability to highlight in an interactive report even after the application is closed

  I have an interactive report where in I have an expression that highlights the lines based on a condition.

  Now once I close the application and re open it after awhile. This configuration or the nail button setting is not available or is not there,

  How can I do this all the time.

  I do it this way...

  Action-> highlight-> specs-> expression-> apply

  take action and click Save report entry and if you want to save as principal then select primary or save it as a named report.

  Leave.

• NO ARROW BROWSER BACK TO BACK TO LEAVE AFTER THE APPLICATION OF DISCONNECTION

  Good afternoon
  
  I developed a small application and the need to know how to avoid or define who does not go to the previous page or go back into the browser (* <-*), after leaving the application by disconnecting?
  
  
  I appreciate your attention and collaboration in
  Good afternoon...
  
  REYNEL Salazar Martinez
  Colombia.

  Hello Rey - Sal,

  This forum is dedicated for the beta of Oracle Database 11 g XE. Although the APEX is included in this version of the database and people here might be interested in helping you, I guess you will get the best help in the forum dedicated to APEX and suggest you post your question once again it: {forum: id = 137}

  -Udo

  Published by: Udo on 27.04.2011 00:57

  PS: I assume that this question has been answered here before. You can also try to search the APEX forum before posting it.

• Is it possible to add a 'before' year after the application is deployed?

  Hi expert,
  
  We created and deployed a HP (EPMA, version 11.1.2.1) application, but knowledge to add another year before the first year, we have at the moment, for example currently we put the 'home' as FY10 and that we must add FY09 to the application. Is it possible to do? Please kindly help!
  
  Thank you!

  Without the piracy, which is not supported and not desirable then the answer, if not, the cleaner is to export the all out with LCM, recreate the planning application, import.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Computer goes down to start-ups, blank screens, random reboots after the installation of Service Pack 3.

  Original title: problems since "Upgrade" from XP SP2 to SP3.

  I missed experience boot-ups, blank screens, random reboots and having to reboot several times to get my home page & then Office to appear since I updated to XP SP2 to SP3 - a Microsoft again found a solution to this bug or should I use the system restore and go back to SP2?

  Hi Gary,.

  You receive an error message or code when the computer does not start?

  It would be possible that Service Pack 3 is not installed correctly.

  (a) I suggest to uninstall Service Pack 3 from your computer.

  How to remove Windows XP Service Pack 3 from your computer

  (b) you can manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  
  Note: system requirements to install Windows XP SP3

  
  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.

• you have to reboot after the installation of the new Flash Player 10 version 10.0.32.18?

  Or it will install without reboot?

  No reboot needed.

  If you need additional information, specify

  • your operating system
  • your browser
  • your current version of the public Service

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.