NO ARROW BROWSER BACK TO BACK TO LEAVE AFTER THE APPLICATION OF DISCONNECTION

Similar Questions

• How can I add Internet browser back/forward buttons in the main toolbar?

  The developer of the software that I have tested is able to open web pages in a window within our software. We find this a great feature, even if it has a drawback: no previous/next buttons, have the habit of users through standard Internet browsers.
  
  Is it possible to add these classic WebHelp output main Internet navigation buttons to the toolbar? I noticed a few other outputs (HTML-help if I'm not mistaken).
  
  I noticed some similar topics in this forum, but the seem to discuss the navigation buttons sequence, we find less useful.
  
  Thanks for looking into this!
  
  Greetings,
  
  Olivier

  Thanks Rick!

  Found in your lean to the Skins folder - topic ' change of the function of the buttons go to function as browser buttons previous & next. "

  Olivier

• my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

  I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
  But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
  So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
  and then restart automatically.

  Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
  What should I do? I can still start windows safe mode. (the same message...)
  I have lots of important files it contains so really want to reinstall Vista.
  Please help me...

  Hi arkitekromero,

  Given that repair options did not work for you.  I suggest you try the method below.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method. Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows. Use this method only after trying other methods. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue. Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available. After using this method, the following conditions may exist until reinstalling Windows: An update is being installed may not be installed correctly. Windows Update may not work correctly. If an update is installed, you may be unable to stop the installation process. You may be unable to enable and disable certain Windows functions in option. Certain optional Windows features may not work correctly. The computer may be in an unprotected state. To rename the Pending.xml file, and edit the registry, follow these steps. Start Windows Vista and go to system recovery options: Insert the Windows Vista installation disc in the disc drive, and then restart the computer. When you are prompted to restart from the disc, press any key. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next. On the Install Windows page, click repair your computer. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next. Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Insert my backed up data after the system has been restored.

  I have a four-year-old desktop HP Pavilion p6226f and am on Windows 7. A few days ago I had to restore my PC to factory conditions. I backed up my data files through the process in the Recovery Manager, on 3 DVDs.

  Is there a utility on my computer that manages the process of insertion of my files on my computer?

  Thank you in advance for your help!

  Update, December 30, 2013:

  Although Jaco has been more than helpful with this issue (read the thread for lots of great ideas and he provided information), I marked by error this issue having been resolved while he was not. I don't know how United Nations brand it, if I add this note.

  I thought, when I got the link to get instructions from HP, I got everything that I had to this summary. That was not the case. So, my apologies. I shouldn't be marked as resolved until what I had followed the process to the end. I'm still stuck in the same exact spot.

  Hello

  Sorry for the inconvenience, but please, use this link. The previous link was for Windows Vista. This link is for Win 7.

  You are the very welcome.

  Happy computing!

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD processor / chipset.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. Win Pro 8.0

• After the application is deployed, how the user can take data back up.

  Hello
  I created an application. Who is running in Mode offline in a machine. User enters data available through this application form. Data enter if the form in our application database table.
  User you want to take data upward in the evening which is in here by user per day.
  
  How can take it Full day data Back to the top. Arrive are enter by the user.
  How can I do that.
  
  I have installation XE in my machine. When I click on start-> all programs-> Oracle database 10 g Express Edition-> Backup Database
  
  What is the use of the backup database.
  
  
  
  
  Thanks and greetings
  Ed
  
  Published by: Ed on March 17, 2010 22:40

  Hello

  I'm sure you can find the answer here
  http://download.Oracle.com/docs/CD/B25329_01/doc/admin.102/b25107/TOC.htm

  BR, Jari

• How can I turn it back on XP after the physical conversion to hyper-v

  I've used disk2vhd utility to convert an XP machine a .vhd.  I rode to a new virtual machine.  It starts fine, but when I did, he invites me to activate the copy of Windows.

  Two problems.  First, the device drivers have apparently not been installed, as well as the network does not work yet.  Activation over the internet is not possible.

  If I choose telephone activation, the automated system tells me that the code is not a valid MS product.  Yet, there is a sticker of genuine produuct on the side of the box from Dell.

  My only option is to stop right there.  Any suggestions?

  Have you actually tried Telephpone activation? -l'option is buit in XP

  However, as I said, it is useless if you do not have a valid license in the first place.

  If you * do * have a license valid, then try this...

  You might be able to solve your immediate problem of the 30-day activation grace period has expired by resetting it. Follow these steps:

  1. If the computer can be started in a safe mode command prompt, do.

  2. at the command prompt, type this command exactly (space, caps and comma are required):

  Rundll32.exe syssetup, SetupOobeBnk

  3. restart.

  If you did it, your activation grace period will have been reset, giving you more time to work on the problem.

• LaserJet mfp 6040: noted 6040 laserjet back to zero after the NVRAM reset counters?

  Hello

  We had to do a reset of the NVRAM and then put the latest firmware to correct a problem

  the usuage meter reading resumed at zero

  It would be very useful if anyone knows if I can enter the readings that we have on?

  As long as you have the information, you can enter using the service menu. A diagram of the menu is attached. Here is link to find the PIN code that you will need to access the menu.

  http://www.printertechs.com/printer-troubleshooting/service-menu-PIN-codes

• Previously used as IP WildBlue. Cancelled and deleted links WildBlue and FireFox. Want FireFox as the browser; using IE7 on desktop. After the download of FireFox and go to "Run", FireFox blocks to try to go to the WildBlue/Google Start Page.

  I'm not that computer. Your site, while trying to be helpful, is very confusing. Anyone can answer my question?

  Okay, lets go through this step by step, and I hope that we can get you operational return here:

  1 double-click on the Orange Fox on your desktop to open Firefox.

  2. in this window (I know he will try to open the page Wildblue, but go ahead and ignore this). I want you are looking for in the upper left corner of the window. She should have "file edit view history bookmarks Tools Help" all listed there (maybe more, maybe less).

  OR you will have a single button that says Firefox. If this is the case, click on the Firefox button, and then click Options. Go to step 4.

  3. click Tools, and then, at the bottom, click on Options.

  4. in the window that opens, you should see the word "General", click it. Then, a little down inside the window, you should see a box that has the homepage next to him. Click on the button "Restore Default".

  5. now, click OK. Then close Firefox. Open again. Let me know if you still go WildBlue or not.

  Read How to set the home page for more information and a video of the above steps.

• No browser back to back arrow to exit after the disconnecting application

  Good afternoon
  
  I developed a small application and the need to know how to avoid or define who does not go to the previous page or go back into the browser (* <-*), after leaving the application by disconnecting?
  
  
  I appreciate your attention and collaboration in
  Good afternoon...
  
  REYNEL Salazar Martinez
  Colombia.

  You can make this page allowed? Without the autehorization, the user can not access, can be redirected to a login page.

• The back button / arrow goes back only 1 page.

  Updated at 31.0 and now when visiting a web page and clicking on links to other pages on this page, the button/left arrow goes back only 1 page. If I right click on the arrow to see all the links I clicked, it shows only one in the list.
  Any ideas why would be appreciated.
  Thank you.

  Stuart

  Start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

  Have you changed all the prefs that show in the details of the system, the list yourself or did you have an extension in the dough that changed those?

  This pref still has the default value (50) the topic: config page?

  • Browser.sessionHistory.max_entries

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Satellite Pro R50-B-V12 - mousepad sends browser back

  I have a Satellite Pro R50-B-V12. I found that if I accidentally drag the top edge of the mouse pad, it is my browser back to a page, boring, especially if I'm filled out a form or making a purchase.
  I'm not using two fingers sliding - he does it with one finger.
  I tried the control panel > devices > mouse properties > advanced > Action dashboard and disabled the Action from the top edge, yet it still happens.
  Someone has other suggestions please? Thank you very much!

  He thinks perhaps you use two fingers, try turning off the two fingers setting.

• IE cache on the browser back side

  Hi all

  I have a form page, a page of action and a confirmation page.

  I send the form page... takes me to the action page where I validate the fields... fields are NOT valid... I place the data and the error message in the session and redirect (cflocation) to the form page. In the page of form I to store session variables (err message and incorrect data) into local variables, destroy the session variables and use local variables afterwards.

  Now I have the correct values and submit the form again... going... valid action page and then redirect to the confirmation page.

  Now if I use my browser back from the confirmation page, it takes me to the page of form with the validation error message and incorrect data... I understand that the IE 7 browser uses the cache to get the data... but I tried to use cfheader and META tags to avoid pulling... always pulls of browser cache cache... This does not happen in Firefox. I use the following code.

  < name cfheader = 'cache-control' value = "no-store, no-cache, must-revalidate" >
  < name cfheader = "pragma" value = "no-cache" >
  < name cfheader = "expires" value = "#getHttpTimeString (now ()) #" >

  < META HTTP-EQUIV = "expires" CONTENT = "-1" >
  < META HTTP-EQUIV = "pragma" CONTENT = "no-cache" >
  < META HTTP-EQUIV = "cache-control" CONTENT = "no-store, no-cache, must-revalidate" >

  Any thoughts on how this can be resolved?

  Hi Madhu,

  I am back. I revisited the thread and my test code. The first code that worked for me is, in fact, not very different from the one I gave above. Only the headers, no tag meta. And my headers are more or less the same as those of the original of your post, too!  So why it works for me and not for you?

  The crucial point to be noted is that if IE buttons next and previous shows pages cached, then it may be that these pages were already stored as history. This means that, in your case, IE must have disobeyed the directive no.-cache. How?

  My first guess is: the web server. If you're using ColdFusion's built-in JRun Web Server, for example, then who might be the index. This web server uses the HTTP/1.0 protocol to answer. Current browsers expect the HTTP/1.1 version. For example, the Cache-Control header was introduced in HTTP/1.1. It could be that HTTP/1.0 is too old for IE and, possibly, that IE is not backward compatible as the HTTP protocol is concerned. Test for to do us next is to compare the behavior of the headers for HTTP/1.0 and HTTP/1.1 web servers.

• How to avoid the focus problem when browsing via browser back button

  Hello
  
  I am facing a problem in setting focus on the buttons.
  Please see application: http://apex.oracle.com/pls/otn/f?p=47869:2
  
  login details:
  Workspace: vsanthanam
  user: vijay
  PSWD: apex_demo
  
  In this application, I have 2 pages.
  #2 has the "submit" button
  Page no. 3 contains the Cancel button
  
  The two buttons are basic HTML and can be accessed using access key ALT + s and ALT + c.
  
  The problem is:
  When I go back to the previous page (pgid #2) of the application using back button of the browser pgid IE #3.
  due to the onFocus event located in the button "submit", control returns to pgid #3.
  
  Is there a possible way to set the focus to other elements. so that whenever IE brower back button, application would stay in
  page #2.
  
  
  I took approaches:
  -------------------------
  If we use onclick, onfocus instead and then the problem remains because we have onfocus = "this.click (); in equipping the Accesskey.
  Another way is onKeyup event. If we use onKeyup, we can avoid this browser back problem, but disappears from the access keys functions.
  
  Pointers on this would be a great help.
  
  Thank you very much
  -Vijay
  
  PLEASE NOTE: I have created intentionally two buttons on each page. It is necessary to have HTML buttons with the key features of access,
  otherwise application gives a few flaws in HTML accesskey.

  Hi Vijay,

  Crikey, aren't annoying browsers! It took a while to get out, but I've updated your SUBMIT1 button attributes:

  class="t20Button" AccessKey="s" tabindex="-1" onclick="javascript:this.blur();doSubmit('SUBMIT1');" onfocus="javascript:this.blur();doSubmit('SUBMIT1');"
  

  Note that I removed the spare semicolons you after each attribute - these are only required in javascript code.

  The important point to note are the statements of "this.blur" () - this tells the browser to move away from the current item to the next. On your page, only for this purpose, I have added a text element of Temp - I am assuming that your actual page will have at least one other element on the page that will accept the focus? Everything gets focus of the call "this.blur ()", should be the element with focus when the Back button is used.

  Andy

• Back to my Mac works for you after the update to 10.11.4?

  After the update to 10.11.4 on my Mac Book Air I can't see my other computers at the office. I turned it works on desktop computers (yesterday that he would not allow it to work, but today it is) and the computers can't see each other in the Finder, even with restart Finder. Did someone else with problems of connection/browser with Back to My Mac?

  Hey brycesteiner,

  I understand that you have a problem with Back to My Mac. Let's see if we can get this sorted out.

  I would first start by taking a look at the article below to address the problem with the configuration of the router and the parameters of sharing on the Mac that you connect to.

  Get help using Back to My Mac
  https://support.Apple.com/en-us/HT203907

  Take it easy

• Back button focus with the 6 d

  I can't get the focus of the "back" of my 6 d (AF-ON) button to work.  After you follow the instructions on the Canon Website on how to implement, the right button does nothing.  Auto focus works only with the shutter button.  I have the function set to "P" which I understood to be okay.  Reset the camera to factory would help?  I'd rather not have to send the camera to Canon for repair of a single button.  Case of the unit was bought new and is still under warranty.

  Thank you

  Glad to hear you got BBF put in place. It takes a bit of practice, but soon becomes second nature for emphasis in this way.

  I don't know what you mean by "choice of the AI Servo.

  Are you new on Canon cameras and systems development? Just in case you are...

  Like most Canon cameras, the 6 d has three modes of automatic update: One Shot, AI Focus and AI Servo.

  One Shot is intended for stationary subjects. The update is performed, then stops and locks, and Confirmation of development is given (the Green LED in the viewfinder, red flash of the AF point in the viewfinder, and if it is enabled, the "beep"). If it moves, you or the subject, or if you change the focal length of the zoom, to refocus you must lift the pressure completely on the button update (whether of BBF or a half press of the shutter button), then reapply.

  It is very important to remember is when you use a zoom, since most modern are "varifocale" designs that does not maintain focus when the focal length is changed by zooming. If you use only one zoom, you need either: set the focal length first, before focusing. Alternatively, do not forget to refocus after zooming. Or, use instead the AI Servo.

  Because development stops and locks after that he is suffering from a sudden, it's a good way if you use a technique of "focus and recompose.

  AI Servo is designed for use with moving subjects. In fact, this is the mode to use each time the distance of the photographer and the subject changes for any reason, or if using a zoom and by changing the focal length. HAVE Servo will never block. Constantly, it measures the distance and updates the development, as long as keep you the pressure on the back button or hold down the shutter button depressed half, depending on how you have the camera set up.  HAVE Servo crashes ever, so there is no Confirmation of focus given. You must learn to trust the camera and yourself. It's working properly.

  HAVE unusable Servo with the technique of "focus and recompose", except BBF is used. If the shutter button is always activated AF, it will cause the camera to focus elsewhere, when you try to take the picture after the restructuring. However if using BBF, all you have to do is raise the pressure of your thumb on the button to stop the development, allowing the use of AI Servo with "focus and recompose.

  HAVE Servo is also ideal for use with zooms varifocale... given that the focus is continually updated the focal length of the lens is changed.

  But he can be very good, AI Servo is not quite exact to the One Shot can be. So critical attention, when possible, use One Shot (Note: Live View and separate focusing system used is even more precise, although it is slower.) Much slower on most of the models... 70 D has a new system that improves a little focus Live View).

  AI Focus is not actually a mode of development at all. He is supposed to decide for you, the subject is in motion or not and then move to the use as appropriate: One Shot or AI Servo. Frankly, I almost never use this mode. It may be better with the modern, but older cameras I tried it had a delay while the camera was "decide" mode to use, and which led me to miss some shots. Also, I prefer to choose my own mode of development, and since I use BBF, I can just leave my cameras in AI Servo most of the time. The word 'pro' oriented Canon models (1 d series cameras) have even an AI Focus mode. They have just two: One Shot and AI Servo.

  There are a few "tweaks" to the AF systems, depending on the camera model, for example to set the priorities for follow-up or the ease with which "distracted" the AF system is if something momentarily intrudes between you and the subject.  Consult your instruction manual for that specific adjustment can be made with 6 d... I don't have so can't tell from experience.

  There is a very useful series of three videos on auto focus systems Canon on YouTube, posted by B & H Photo and Rudy Winston of featuring Canon USA... Each video is long about half an hour and the first one is: highly recommended http://www.youtube.com/watch?v=iAx86nblZ2g , watching all three for additional info, even if they are a few years now and don't specifically talk about the focus 6 d system (5 d Mark II and the original 5 d AF systems are quite similar to 6 d, except that they have less than two points and have 6 in option hidden 'help' points available in AI Servo mode).

  I hope this helps.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY