devices cannot search for printers

Similar Questions

• Cannot search for windows update, error800700B7

  Original title: Vista 2. Windows Update says first major update but cannot search updates. I get error code 800700B 7.

  I fight with my laptop Acer Aspire 5313 since before the new year, trying to get my Media Player to work... trying to get my updates to load and I finally did a restore disk in desperation. I noticed when I did restore the Version of Windows Vista Home Premium it restored to was that for Service Pack 1, it should have been 2 Pack and registration of license # is different from that on the Windows label on the bottom. I downloaded the Service Pack 2 of MicroSoft.com as my laptop came with ANY disks and I thought I'd finally be able to perform the necessary updates and get at least my laptop up and running again as it was before the problems started. When I try to get the updates, it says I must first update Windows Update. I try to update, update and get tells me it can not search for updates. error code 800700B 7. Help! Please...

  Hello
  You can follow the steps and then check.

  Step 1:
  You can try to disable the antivirus installed on your computer software.
  You can see the following link.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
  You can try to reset the Windows Update components. Read the following article.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   
  It will be useful.

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - error Code: 8024402F (cannot search for updates)

  There is a code that appears when I try to search for windows updates, pls help, code is 8024402F. My operating system is windows 7 Home premium, 64-bit.

  Bongz,

  See the following topic for your question

  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa

• 'Documents' folder (plain text) Foxpro. PRG files and cannot search for find in files

  I have 64 bit Win7 Pro.

  I have a C:\Users\Owner\Documents\PRG folder with a number of Foxpro. PRG (plain text) files.  I can't get Windows Search to search for files.  For example, several files have the command "TO PAINT" in them.  If I bring up an Explorer window and use PAINT, I just get 3 file names that have PAINT in them without a content search.  I've read other suggestions to use ' content: 'paint' ' but that no results me at all.  I tried another suggestion: a window withCMD searchFile-name: "*." ' * ' - content: "painting" and got an error that says'searchFile' is not recognized as internal or external, command an executable program or batch file.

  I have to install a UNIX client to get a search utility that can find things I need?  At this point, I'll take something that actually works.

  If you type a Search in the research area, scroll down to change the way Windows search. The first page allows you to change the folders that are included in the search.  Under the buttonAdvanced -> File Types , you can select which extensions are included in the search.  You can also add a new extension if it is not listed.

  See you soon,.

  Barbara

• File directory cannot search for Smartphones blackBerry after new entry

  I recorded a new record on my phone book, and I use the search icon-online-online Select All keyword-online search.  I could find that record of my directory.

  And I double check a few times in the phone book file is prevailing.  Do not know why.

  (I tried the two first, last, first + last name) still does not work.

  All the old records seem to work OK with the search except this new record feature.  I deleted that record and recreated again again do not help.  Help, please.

  I tried it and I'm able to find Contacts using the search. I found that I have to enter the name of contacts in the field 'Name' rather than the 'Text' field so he can find it. I have never search for the one that long before that. I always go into the address book and type the first few letters of their name and he will find them.

• vCAC 6.1 Catalogue right - cannot search for or select users or group?

  I want to install vCAC 6.1 from scratch and try to entitle a group of users for my first article in catalog.  When I'm on the Administration > catalog management > rights tab and type "domain admins" ordomain\domain admins"to search for a user I just get"no data to display.

  

  I thought that my source of identity was the issue then I double checked that...

  

  And the strange thing is that I can seek this identity store when I'm under Administration > groups

  

  I don't know why I can't find users and groups above, but I can look for them in the admin > groups option.  I have been stuck on this for about a day and can't get anywhere.  I restarted the identity goes, the vcac goes and the iaas server.  The logs will show that nothing is wrong either.

  I was walking around videos from youtube by Yves Sandfort.  I watched all the videos of the series and followed, but at 10:08 in the video, I get to a stopping point.

  VCAC VMware 6.0 - based hypervisor Blueprint by Yves Sandfort - YouTube

  I am new to vCAC so I could have done something wrong.  I hope that its simple.  Let me know.  Thank you!

  
  Joe

  Just make sure, but domain administrators have user rights in the Group of companies to ensure that this right is?  If they have not so you will not be able to grant them rights to this right.

• Windows cannot search for updates (all the time of different codes)

  I have a system that is used to run windows 7 well. Then I went to windows 10 and had problems after a major update soon after liberation. After that, my system did so, but I ran into issues. As a result, nearly a year later, I decided to try to go back to windows 7 with a completely new reinstall and re-upgrade. My windows 7 will not update and I miss all the tools that I can find as a substitute or a repair or cmd commands. The initial error is coded C80003FA. I did a lot of difficulties which seems to be similar to my questions and the Fix - it tool cannot find convenience stores. I also tried the standalone installer of windows and he found the fix, but could not install. After doing all the patches that seem relatable to me somehow, I now get the error code 8008005. This code came while typing, but other codes appeared as well.

  Y at - it suggestions on what I can do or is there a way to help?

  Thank you

  SYSTEM:

  Processor: AMD FX 8350 3.2 GHz

  GPU: MSI R9 380 4 games

  RAM: AMD 8 GB DDR3 RAM

  Hard drive: Seagate 1 TB drive HARD drive

  PSU: Corsair CX750

  MSI M5A97 EVO Motherboard R2.0

  Hi Harry,.

  At this point we suggest is that reset you the Windows Update components. To do this, you can consult this article for steps to reset the Windows Update components

  Let us know how it goes.

• Cannot search for photos by tags

  Hi, don't know if this should have been placed photos & video but I think it's more a research problem.

  Here is my problem. I have a lot of images on my Witch of the computer are very well organized but I want to organize them even more with labels. I did some experiments with it and there is something I don't understand. Some pictures, when I downloaded them from the internet, already had some tags, so I looked in that folder for theTags: tag name and the image has been detected. Then I searched only tag_name and again, the same image has been among the results. I'm not sure I like this very much but I'l defer. After that I added another tag to this same photo and when I searchedTags: additional_tag_name I found this image. OK, so here

  My problem was when I chose an image without any tag first and add a few tags. Never, he appeared in the search results. I have absolutely no idea why this image was different from those who worked. All images are in JPG and looking at the details, it not there no major difference between those who work and those who are not.

  For many of my photos, I've added tags to Picasa 3 and on the Details tab, next to the program name it know Picasa 3. Don't know if it of a problem or not, but my problem is the same for images that have never been amended in Picasa or any other program.

  If you have any idea, please help. Thank you, Victor Dumitru

  Hi victor,
   
  1. you save the tag information after the addition of the tag in a photo file?
   
  Check cross if you save files tag information.
  For more information, see tag pictures so they're easier to find
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 0X8DDD0018 (cannot search for updates)

  Original title: error 0x8ddd0018 # how can I do it please help

  would not connect me to update the page on page.thanks microsoft for any help update

  Hi boy007,.

  This error message you would receive if the Background Intelligent Transfer Service is not running on the computer see link below and try the steps mentioned.

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download updates from Microsoft Update or the Microsoft Windows Update Web site

  http://support.Microsoft.com/kb/910337

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet Pro 200 color M251nw: icon of Notification: looking for printers

  There is a persistent icon in my notification area Windows (formerly called the "sandbox").  It has the image of a printer, and its ToolTip indicates "in search for printers.  I have only one printer, so I would like to remove.   More important, I would stop its launch.  How do I do that?

  That's great. Thanks for letting me know desilien.

  Looks like that the notification was for the Laserjet CP1215 model.

  I can send you a private message on how to go into the registry and remove all Laserjet CP1215. If you feel comfortable. In the forum next to your handle name simply click on the envelope to see.

  Please backup the registry first, before removing anything.

  How to back up and restore the registry in Windows.

  Thank you.

• Cannot search updates. error C8000210.

  Windows cannot search for updates. I get the C8000210 error code. He says its an unknown error.

  Try the fix on this page: http://support.microsoft.com/kb/971058

  I hope this helps!

• This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Map #2 Microsoft Tun Miniport
  This device cannot start. (Code 10)  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  ???

  Hi AnaSk,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.

  Download and install the latest drivers from the computer's network adapter or the website of the manufacturer of the device.

  See the article below

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• HP bt500 - your Bluetooth device could not start the search for devices

  Hi, I want to use my HP bt500 to connect my PC to my helmet, but I get the following error message:

  "Your Bluetooth device cannot DΘmarrer him search for devices"

  I downloaded and installed the Windows XP of HP bt500 software version of:
  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&product=3350927

  I tried on two different computers, but they both get the same error.  I took out the bt500 my HP photo printer.  I wonder now if this bt500 is simply limited to only work with printers and not the PC as the other versions of detail.

  Help, please.  Thank you.

  Problem solved.  I had to download the broadcom bluetooth software was last updated.

  www. Broadcom.com/support/bluetoothupdate.php

• Search for display wireless devices

  Some how I managed to get up the circular screen with a rotating wire that displays all available devices. Now his party and I cannot get to the top. I have a left click on the taskbar icon and a "search for wireless devices' but only get the small screen. someone help please?

  Hi Paul

  If I understand you right that you talked about ConfigFree Launcher. If I'm right, you can start it by clicking with left mouse taste ConfigFree icon on the taskbar. Choose search for wireless devices, and the pitcher will start. On the right side of the screen you can see four icons. On top it is called icon option. Check all the settings and you can also set an option that starts the Launcher to start Windows.

  Good luck!