Devices stopped working

Similar Questions

• After you download an update from Windows, my audio device stopped working.

  original title: no audio device is installed

  After an update of windows, my audio stopped working.

  I have the cd for my motherboard and installed the driver put it does not appear and all I get is no audio device installed

  I do not use speakers on this computer, I installed with audio sharp screen.

  any suggestions... I do a system restore?

  I use windows vista 64 bit on this machine (at home)

  The motherboard is a classic series intel DG31pr

  4 GB ram corsair

  other than the update it worked very well...

  Hello

  1. what was the number of KB (Knowledge Base) of the update?

  2. at the Vista service pack update?

  Click on the link below, so wasn't the update of Windows Vista Service Pack.

  Information about audio device drivers that are known to cause problems when you install Windows Vista service pack

  Hope this information helps.

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CD-ROM and CD of the emulated devices stopped working

  I tried to clear up some errors in the case of newspapers, including related Microsoft Security Essentials and I ended up uninstalling and reinstall that. My CD/DVD drives stopped working after a reboot. I checked the BIOS Setup, and they have been recognized. I checked the Device Manager and found that my two CD/DVD drives have the yellow triangle, just like my two disks MagicDisc, a Western Digital DVD emulator that comes with an external drive, and an emulator of DVD with Roxio Creator 2010. The specific error, there was: "a driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32) ».  There are three listed cd-rom drivers, one of which was cdrom.sys

  So I looked in the event log and found two errors:

  The next (s) starting or starting system could not load:
  aqIPD7
  Event ID: 7026

  A timeout was reached (30000 milliseconds) waiting for service to Roxio Hard Drive Watcher 12 connect.
  Event ID: 7009

  So I read some suggestions and ended up running this Registry Fix:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}]
  "UpperFilters" = -.
  'LowerFilters ' = -.

  Not only did not help, but it removed 2 of the three listed cd-rom drivers.

  Earlier in the day, I ran Microsoft Fixit 50656 and he said that was to create a restore point, but apparently the system restore has been disabled for the drive, and there is no restore point to return. And of course, any media that I could try to recover from is unable to read with a DVD drive, or ISO emulator.

  I'm stuck somehow.

  PS: I ran sfc/scannow, and it reported as an error:

  2014-02-12 20:08:42, CBS News could not find XML aggreated string package, package: Package_for_KB976933 ~ 31bf3856ad364e35 ~ amd64 ~ EN-~ 6.1.7601.17514 [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  2014-02-12 20:08:42, CBS News did not update the deployment package [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  2014-02-12 20:08:42, error CBS failed to check if the package is partially installed package: Windows7SP1-KB976933 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514 [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  2014-02-12 20:08:42, CBS News could not evaluate the external applicability for update package: 976933-0_neutral_PACKAGE [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  2014-02-12 20:08:42, error CBS failed to call external assess the applicability on the package: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514, updated: 976933-0_neutral_PACKAGE [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]

  He said that he could not fix them.

  In Device Manager, can you right click on each of the inactive disks and select "Uninstall".

  Restart the computer and let Windows RE-detect readers.

• Device stopped working for ergonomic keyboard 7000 zoom

  Original title: Zoom feature stopped working.

  The zoom on my 7000 keyboard ergonomic function has stopped working. I need help to restore it because I do not need to have a large font.

  Hello Ann,.

  Please write us with the following details.

  1. Are you referring to the natural ergonomic Desktop 7000?
  2. You did changes to keyboard settings?

  You could deal with this issue when driver is corrupted to if there is some incorrect settings. I suggest you follow the steps in the link below, if you are referring to the natural ergonomic Desktop 7000.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  If you are still having the same problem, please contact support team of material on the contact information below.

   

  Contact us

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Email us if you encounter any other problem related to Windows.

• USB 2.0 to VGA device stops working after a while, reconnected works again

  I tried without success to use this device to connect my second monitor.  It works for half an hour, give or take and then nothing.  I unplugg and plug in my lap and he does it again, and I repeat the cycle until what I got too frustrated.  I go into devices and it shows all of my devices do not work correctly, but this is not the case.  I returned a cable and got a new one, but the problem persists.  Anyone else having this problem until I disconnect everything and walk to the center of Micro.

  Hello

  • Is what type of camera?
  • If you use a different USB port it works?
  • Are these USB ports on the USB powered monitor?

  Please answer back with more information that helps us better understand the issue.

  In the meantime, I suggest you perform a clean boot and see if the problem still occurs in the clean boot state.

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Optiarc DVD RW AD - 7560 ATA device stopped working, code 39 how and what to do?

  IM using pc acer 4920 have been awhile this optiarc DVD RW AD - 7560 A ATA device no longer works with code 39. I your ipinion, thank you! xxx

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• pointing device stopped working, try to update driver through Windows Update

  Unable to connect to the synaptics pointing device driver, mr fixit tried to sort them and receipt message.

  configured to never install Windows Update update drivers don't know what to try next hope
  can someone point me in the right direction, thanks in advance pattiejay.

  If you go into Control Panel, change it to Classic view, and then select Windows Update, then change the settings. This is where you can configure your auto-update settings.

  I hope this helps.

• My device audio stop working after the installation of update security for Windows 7 for x 64-based systems (KB2286198)

  Hi, since Windows Update automatically installed this patch my audio device stop working. It does not appear in Device Manager. I've restored the system to a previous point and works now. I have disabled the automatic updates of Windows, but I really appreciate if Microsoft Support could check this because at some point, I will need to continue the update of Windows (because of several security mistakes!).

  Thank you!

  I restore my system to an earlier point and did not work! After several hours of searching for a solution in the web I realized that (fortunately!) I had a copy of the registration precedent and do a comparison, I noticed that some missing case book lines:

  In

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_02 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0002\

  The 'Control' key with a string value 'ActiveService "=' Modem' was absent.

  Also in

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30D6 & REV_1000\4 & 38993660 & 0 & 0001

  I added a 'Control' button with a string value "ActiveService" is"ksthunk".

  Finally, I restart my system and Windows again recognizes my camera and the driver installed!

  Of course this solution depends on the machine you have. I have a HP Pavilion dv2000 with Conexant High Definition SmartAudio 221.

  I hope this helps someone!

  NOW I'M GOING TO TURN OFF WINDOWS UPDATES!

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• All the devices stop, while the computer is unattended.

  Recently at random, all devices stop working and I have to manually restart the computer, the mouse no longer responds, keyboard stops and the monitor says there is no signal, I unplugged and restarted all of them and run a scan and Defrag virus. I have also diagnosed the material and check the drivers and all seems good. This happens more frequently, but never while I'm on the computer as long as it's the mode 'sleep', I think. Food would be bad or what else could be the cause? It is a HP pavilion 3120

  Thanks for your reply,

  I noticed that the computer seems to be running much hotter than normal, I opened the box and the cooling fins were clogged with dust. I cleaned it up and see if this corrects the problem. I hope it's something as simple as that. If this isn't the case, I'll try the steps mentioned above.

  Thanks for your help!

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• AUDIO DEVICE HAS STOPPED WORKING

  My Audio device (NVIDIA) has stopped working. By clicking on the icon, the following text is displayed:-No. AUDIO DEVICE IS INSTALLED. the icon has now disappeared from the lower r/corner of the screen. Can someone tell me how to restore my audio device. I recently downloaded the SPOTIFY music program.

  The computer is a Compaq Presario, 4 years old and I have windows vista Home premium installed.

  Go to control panel, Sound, on the reading tab, select your speakers and then click set as default below. Click on apply and OK buttons to exit. If you do not find your right speakers click Show devices disabled or show disconnected devices.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• WRT54G - wireless just stopped working on all devices

  Hi all

  I had my WRT54G for a few years and have my hard wired office (to the router) and 2 laptops and an ipod, wireless successfully for 2 years. Woke up this morning and nothing connects wireless, find that the router is intermittent, and when it does, it cannot establish a connection with her. I can connect the devices via the network cable directly to the router and everything works fine, it's just wireless which has suddenly stopped working.

  I tried "' turning and the new" disable the WEP password changing WEP etc but nothing seems to work. " IM at a loss as to why my all just network/wireless has stopped working?

  Any ideas?

  You must update the firmware of the router, then reset and reconfigure the router.