DHCP server on a VM guest that is connected to a router (in AP mode) works on the host Linux (Fedora), but not on the host Windows (XP)
I'm in dual boot Fedora and Windows XP, and configure a server vmware 2.0.0 122956 on both.
Here is my config:
Internet - Modem - vm_gw - vmnet1 (host) - vm_dhcp - router Wireless ADSL - computers laptops
There are two physical network adapters on my host. On the virtual machine that connects to the internet (vm_gw), I have one of the network adapters physical bridge (as vmnet0) to dial the ADSL modem and set up a network of hostonly (vmnet1) share the internet connection of the VM on the host and other virtual (vm_dhcp) computer. On the virtual machine which also shares the internet connection to a wireless (vm_dhcp), I fill the other physical network (like vmnet2) adapters to connect to a router (in AP mode) and have a configuration of DHCP server on it and set up a hostonly (vmnet1) network to get its internet connection of vm_gw.
I installed proper routing on my host computer and two virtual machines and this config works very well on my Fedora host. However, the DHCP installation part does not work on my Windows XP host computer.
The difference between my host Fedora and XP is on Fedora host, can I have two network adapters physical activated with a config 'empty' (to use DHCP or static) as in:
DEVICE = eth0
HWADDR = 00:11:22:33:44:55
ONBOOT = yes
TYPE = Ethernet
and
DEVICE = eth1
HWADDR = 55:44:33:22:11:00
ONBOOT = yes
TYPE = Ethernet
And there is no conflict on the physical network adapters between the host and the virtual machines.
However, on XP host, I HAVE to configure the network adapters physical to use DHCP or static.
If I place the physical network adapter (on the XP host) who will fill to vm_dhcp using DHCP, it will get an IP address from the wireless router and the DHCP server on vm_dhcp doesn't seem to be able to 'find' the wireless router and assign an IP address that him.
Then I tried to configure the physical network card to use the static IP address (and assign it a fictitious IP address e.g. 192.168.123.1/255.255.255.0) to see if it would work, but it does not work either.
Then I also tried to "simulate" the 'empty' network on Fedora config using regedit and delete (192.168.123.1/255.255.255.0) IP address on the network config and it does not work.
Well, I'm out of ideas and I came here as a last resort. Any suggestion/discussion is welcome.
Thanks for reading.
WLPL
Simple question, I know, but is the Windows XP firewall is enabled?
Tags: VMware
Similar Questions
-
I'm having a problem with firefox, play background music on some sites, it works with IE and other browsers, but not with fire fox, what html script or java I must add to the pages so that they play music?
I am developing my pages front page and I know the music only works on IE, so if someone can tell me how to fix this because it is important that I use fire fox as my main browser.
Thank you in advance
If a site uses BGSOUND so this will only work in Internet Explorer.
BGSOUND is not compatible with other browsers like Firefox.
-
How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?
dannyb76251437 wrote:
How can I put pictures outside the window of Photoshop elements 14 work, so that I'm not obliged to work within the program window, but use my screen completely for the image?
Note that you can work with two screens and drag and drop the image to display on the other window.
I think you mean working temporarily with the window enlarged image without displaying all the tools and panels.
See:
Panels and bins in Photoshop Elements
My advice: take the time to read the above help and especially to look at ways to maximize this window if you are on Mac or Win.
Set your preferences in the Edit menu to "allow the floating windows in expert mode.
Use the "tab" on the keyboard key to hide or show your panels and tools quickly.
Find out how to hide the photo tray.
-
I want to see all the devices that are connected to my router
I have a router E1200 and it is very good, however I have noticed that there are 12 devices connected to my router so infact it should be only 4 devices. I would like to see all the devices that are connected and disconnect those who do not belong to HELP!
You use software to see all the devices that are supposed to be connected to your router? You can reset and start over with your router. Make sure you have security enabled on it as WPA Personal. You can try a DHCP reservation so to ensure that devices that will have access to your router are those you have included on the list.
-
Many shortcut keys do not work in apps/sites in the browser window:
CTRL-C, RIGHT/LEFT/TOP/DOWN-arrow, BACKSPACE (back), CTRL-D, CTRL-T, TAB to move from one field, etc.
Using the menu commands such as COPY and PASTE work fine, while CTRL + C and Ctrl + V do not work.
Real pain... (since the upgrade to V20 a few days ago)
Following another suggestion here, I went in: config and disabled the "allowclipboardhelper.tabs.disabled" parameter set to "false". No change.
I'm on Mac OSX 10.7.5 (Lion).
Hello
Thank you very much. And thanks for the quick response!
I did as suggested and restarted several times enable or disable addons to isolate the one that generated the problem.
The guilty were:
Website and SEO analysis 1.1
SEOpen 1.2Everything seems fine now.
Take care.
-
See above
Well, the graphics could be horrible because the game is so old. But you can visit the site Web of EA (by clicking here ) and see if they have patches for the program, you can run that can help.
In addition, you can click with the right button on the launcher and try to "Run as Administrator" or if it does not work for you. Try right click on the Launcher, click Properties, click the Compatibility tab and then choose to run it in compatibility for Windows XP SP2 and see if that helps. A combination of which will probably help you.
K
-
My Board didn't work and the main window screen appears as "guest."
My administrator abilities remained with my name. But all my downloads and my main screen of windows can be found on "comments". "." And many major programs are on "comments, but I can't switch them me - the administrator." Help!
Hello
1. Since when are you facing this problem?
2. don't you make recent changes?
I suggest you to follow these steps and check if that helps:
Method 1:
Try to restore the system to an earlier point and check if it helps:
http://support.Microsoft.com/kb/306084
Method 2:
Otherwise, I suggest to create a new user account and copy all the data to this account, see this link:
http://support.Microsoft.com/kb/811151
For more information, see this link:
http://support.Microsoft.com/kb/555473
It will be useful.
-
Why can I play a WMV video that I created, but not import it into Windows Movie Maker?
Why do I get the error message "the file * *.wmv cannot be imported because the codec required to play the file is not installed on your computer." If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "even if I CAN play the video in Windows Media Player?
I have a Windows Media Video file I recorded using another program. I can open the video and watch it in Windows Media Player, but when I try to import into Windows Movie Maker (as I did with the other videos I recorded), I get a message saying that it cannot be imported "because the necessary codec to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to re-import the file. "I tried to close Windows Movie Maker and reopening, she even tried to restart my computer, but it still does not work.
Hello
· What program did you use for recording to WMV file?
· Are you having similar problem when you try to import the WMV file, which is not recorded by this program?
Method 1:
Although you can play a file in Microsoft Windows Media Player, you may not be able to import the file into Windows Movie Maker even though this article lists this kind of file. You will not be able to import the file if the codec that was used to encode the audio or video is not a codec that is supplied with Windows. In this case, you can re - encode the video or audio by using Windows Media Encoder, and then import the video or audio.
To download the Windows Media Encoder, see the Microsoft Web site at the following address:
http://www.Microsoft.com/download/en/details.aspx?ID=8509
http://www.Microsoft.com/download/en/search.aspx?q=Windows%20Media%20Encoder
See also:
Importing files into Windows Movie Maker: frequently asked questions
Method 2:
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
remote access to the computer that is connected to a router wireless
Hello Forum members
I have a 4-port/router set-up wireless (compatible VPN) in the office.
3 PC (Windows 7 Pro) is connected to a router (wired connection).
1 VOIP adapter is connected to a router (wired connection).
1 PC (Windows XP Pro SP3) is connected to a router (Wi - Fi).
When I'm on the field, I need to access these devices via VPN. I can access 3 PC (connecting to the wired router) via VPN.
However, I can not connect to a PC (wireless connection to the router) via VPN.
Could you please tell me how I can access this PC (wireless connection to the router) via VPN?
This PC (Windows XP Pro SP3) seems to need further adjustments under Windows Service.
Thank you.
Hello
The question you have posted will be well suited in the TechNet forums. Click on the link below.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
-
On SG300 DHCP server configuration error
Firmware 1.3 introduced a DHCP server.
It seems that I can add a pool for any subnet except for the 192.168.1.1/24. I've successfully added a pool for 192.168.0.1/24, 172.16.16.1/24, etc. But when I use the same commands to add a pool 192.168.1.1/24, I get:
SW (config) #ip dhcp pool perimeter network
SW(config-DHCP) low #address 192.168.1.20 192.168.1.250 high 255.255.255.0
Illegal IP address range, or subnet configuration tries to configure a pool of network on the default IP interface
VLAN 1 IP went from 192.168.1.254 to 192.168.0.1 static default.
Any ideas?
Hi Frank,.
Looks like you are experiening, bug CQ145102. There is currently no work around: Sx300 1.3.0 FW Release Notes.
Problem: You cannot configure IP address 192.168.1.0/24 subnet as an address
pool, other subnets are allowed. (CQ145102)
Solution: There is no workaround.
I open a case with Cisco Small Business Support, have your degenerate case and see if you can get the beta FW. The only alternative would be to review your network in order to eliminate the 192.168.1.0/24 subnet.
Kind regards
-David (formerly khaledammad)
-
Hello
I was wondering if there was a way to change the integrated DHCP server address range of 192.168.1.x for, say, 192.168.0.x? For example, when you change the IP Address of the router from 192.168.1.1 to 192.168.0.1. I noticed that when you post such a change, the DHCP range does not update accordingly. Any ideas?
Thank you
Paul
Your range of DHCP server should update automatically to the 192.168.0.x subnet when you change your "local IP address" in 192.168.0.1. Be sure to use a computer that is connected to your router when you perform this operation. In addition, be sure to click 'Save Settings', and then to wait (from 3 to 60 seconds) screen refresh. You will be probably disconnected from the router when you perform this operation. Don't worry about this. Turn on the router and your computer.
Then, wait 30 seconds, and then restart the router and the computer. Now, your local IP address and range of DHCP servers should have the same subnet.
-
Client PC getting no no IP to win 2012 DHCP server
Hello
In my VMWare workstation9, I installed win 2012 (host only) & convert to domain. Then DHCP server set up/range over.
Same time put in place Win 7 as a client (host only), but its not get IP from the DHCP server.
Is what I need to put in place to distribute the IP?
~ r
Hi Porto,
It's done... Victory 2012 may authorize the scope 2 times, although I did it right after configure DHCP.
Anyway thanks for your reply...
~ r
-
I use an old server. I've been reading that you can fix the file for XP if you have the disc but Server 2003 a 5 disk, that you would use, or would you use even one of them?
Hi BrianStoll,Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.
You can follow the link below to ask your question:I hope that helps! -
FireFox blocks many sites and said that this connection is Untrusted
many sites is blocked by firefox like facebook, yahoo mail, and even on this site.
its saying that this connection is Untrusted
and this site while working on other browsers
and I'm sure that the date of the pc is accurate and up-to-date
So what???What security (firewall, antivirus) software do you have?
Some monitor of secure connections and send their own certificate instead.
A few examples:
- ESET setup-> Advanced Configuration-> expand web and email-> SSL shaft
- SSL protocol: do not scan SSL protocol
- BitDefender-> privacy-> settings disable SSL Scan
-
I can't seem to be able to scan with HP Laserjet M1132 MFP on the network (printing works fine). Is it possible, and I just don't know / are unable to connect or it doesn't have this feature?
* Everything works fine on the computer that is connected to the multifunction printer over USB cable
Hi Deividas,
I can't wait to hear that you have questions. For the LJ 1130 base series networking is not supported, however for some 1132 models Ethernet network is supported. It will depend on the exact product/model number for this unit. Click here to find out how to set up a wired network for 1132 connection the selection of models that supported this option.
1A configuration of network peer-to-peer sharing of the computer that is connected by USB?
2. What is the number of product to the rear of the unit, should start with J?
3. how you analyze (front panel, scanning software, etc.)?
Let me know and we can go from there.
Kind regards
Maybe you are looking for
-
Qosmio F20 wireless no longer works
Help!He had only a few days when first turned on it finds my network fine, used for two days, then when not pulled up the next day no network. My second laptop works fine, as does my Ipaq and PSP. The router is completely basic without security etc.
-
Why do I get a warning "stop character has been read" with VISA read and TCPIP?
I use VISA readings with raw sockets TCPIP without problem with NI-VISA 3.0.1 but when I moved to NI-VISA 4.4 I was getting timeout errors. Time-out errors disappeared when I put the stop character allow the property (which seemed to be default in
-
Some time before, I bought Cineplayer codec for Windows XP and Windows Media Player ver11. Then I could watch DVDs on my laptop without problem. Suddenly, for some reason, now I get only audio, but no video what so ever. I haved tried several diff
-
Can not connect to my computer
OK, so I took my computer to my friend. And the beautiful him crashed hard drive. Fortunately, he was kind enough to buy me a new one and have installed. Now I have my computer back. I turn it on, click on connect under my name... and a little error
-
HP 1102w: printer wireless, Hp 1102w reinstalled and says use printer offline
Hello I recently changed my suppliers and changed to a router different had verizon has worked for years changed to twc with an arris TG1672g router I can print the first test wireless page, but when I try to print anything else in the see what's pri