Client PC getting no no IP to win 2012 DHCP server

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• hostname gets vmnet8 form ip and no default dhcp server

  Hello
  
  I installed VMware Workstation 7.1 last week and noticed that my hostname in my linux box gets the number of ip not default dhcp server but vmnet8 as before.   Is there any way to go back to that?  It has destroyed my samba server.
  
  Thank you very much
  
  Ed

  Comments of vmware can obtain ip addresses from the dhcp linux without vmnet1 and vmnet8 Server?

  Yes, if the virtual machine network adapter is set to Bridged so it will be on the local physical network the host is and should be able to use its DHCP server.

• Pwerconnect 6224: vlan client computers do not receive the ip address of DHCP server on a different VLAN

  Hello

  I have a prolem routing dhcp requests between the vlan management where DHCP server resides and the other VLANs.

  I have the scenario of base with three VLANS: vlan 10 (management vlan), 20, 30, configured on a Powerconnect 6224 switch L2 mode. This switch is connected to a pfsense router. The router is configured at the package of road between the VLANS and it does it well.

  In Vlan 10, I have a configured DHCP server to use the ip addresses of all the VLANS (10, 20, 30). VLAN 10 client computers receive ip address but not others from other VLANs.

  When I put the ip address in the appropriate range of VLANs manually on computers, I ping the server and I have connectivity.

  This suggests that the problem is with the dhcp package.

  The following is the configuration of the switch:

  Configure
  database of VLAN
  VLAN 10,20,30
  VLAN 1 1 routing
  VLAN 20 2 routing
  VLAN 30 3 routing
  output
  SNTP server time.nist.gov
  clock timezone 1 minutes 0
  battery
  1 1 member
  2 2 Member
  output
  DHCP IP address
  IP address vlan 10
  name of the IP-server 172.16.10.1

  bootpdhcprelay cidridoptmode
  interface vlan 1
  Routing
  IP 172.16.1.1 255.255.255.0
  output
  interface vlan 20
  Routing
  address 172.16.20.1 IP 255.255.255.0
  output
  interface vlan 30
  Routing
  IP 172.16.30.1 255.255.255.0
  output
  level of 20fc49459a1898b923ed3ec7b3e81276 user name 'admin' password encrypted 15
  No spanning tree
  spanning tree priority 0
  l2relay DHCP
  DHCP l2relay VLANs 10, 20-30
  DHCP l2relay circuit-id VLANs 10, 20-30
  !
  interface ethernet 1/g2

  l2relay DHCP
  switchport access vlan 20
  output
  !
  interface ethernet 1/g3
  l2relay DHCP
  switchport access vlan 30
  output
  !
  interface ethernet 1/g21
  switchport access vlan 10
  output
  !
  interface ethernet 1/g22
  switchport access vlan 10
  output
  !
  interface ethernet 1/g23
  switchport access vlan 10
  output
  !

  interface ethernet 1/g24
  switchport mode trunk
  switchport trunk allowed vlan add 10,20,30
  output
  Server SNMP community EyesOfNetwork ro
  SNMP-server community public ro
  output

  I followed the instructions in the powerconnect 6224 user guide, but no progress on this issue.

  Any help will be be grateful.

  Thank you

  Zoubeir

  The DHCP server stores information that could be useful? May need to configure monitoring ports and something as wireshark to monitor DHCP packets. This would help determine where the package is stopping.

  example:

  Console (config) #monitor session 1 source interface 1/g8

  Console (config) #monitor session 1 destination interface 1/g10

  session mode 1 #monitor console (config)

  right now I don't see anything in the config of the switch that stands out. If the DHCP server is configured for option 82, then you will need to include the following command on the switch.

  Example:

  Trust l2relay console #dhcp (config-if-1/g1)

  But I don't think that's our scenario here.

• Get a strange IPv4 address of the DHCP server

  Hi all

  As title, I got a strange IP - DHCP server 169.254.XXX.XXX.

  I used Wireshark, tried to get the bootp packets.  I found that my laptop 169.254.xxx.xxx used as source address to send DHCP Discover.

  In addition, there is an option called content with 169.254.xxx.xxx requested ip address. Like my source address.

  I couldn't access the Internet with this IP address.

  I was wondering, is that it is a normal behavior for windows 7 to use 169.254.xxx.xxx to send DHCP Discover?

  A DHCP request is sent through the universal 255.255.255.255 broadcast address which is one of the addresses that a server is listening. The query includes the MAC address of the applicant unit because at this point, it doesn't have an IP address. The DHCP server responds to the MAC address in order to assign the address.

  In your case, the range 169.254 is called the APIPA address and the PC actually assigns to himself because he did not see a response from the DHCP server. As you refer to Wireshark having a reading of the present.

  http://wiki.Wireshark.org/APIPA

  The customer may not send the request via this address and get a response because the DHCP server is not listening on the address or by using the range. The answer must be done via the Mac.

• In Win 2012 R2 server, choose your type of keyboard

  Hi all

  I use WindowsServer 2012 R2 std while restarting the server right now there getting error Choose your type of keyboard,

  So please guide me how to solve this problem.

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• ASA AnyConnect client is unable to obtain the IP address of the remote DHCP server

  I and ASA with 10 client AnyConnect profiles set up to get their IP address of my Windows DHCP server.

  It was working fine yesterday.

  I saved the config and rebooted the device.

  Now it won't deliver to my vpn clients intellectual property.

  I don't understand what is happening.

  If I change the profiles to use a local pool he assigns an IP address and works very well.

  But I can't use the local pools.  I have to use the DHCP server on the local network.

  The ONLY thing that was made was that a license allowing the AnyConnect Essentials has been installed recently.

  I get this in debugging:

  6 August 30, 2011 10:44:39 DAP: test49, Addr 107.44.142.20 user, connection AnyConnect: following DAP records were selected for this connection: DfltAccessPolicy

  6 August 30, 2011 10:44:39 group user IP <107.44.142.20>AnyConnect parent session began.

  7 August 30, 2011 10:44:39 IPAA: received message 'UTL_IP_ [IKE_] ADDR_REQ.

  6 August 30, 2011 10:44:39 IPAA: attempt to query DHCP 1 successful

  6 August 30, 2011 10:44:39 IPAA: DHCP configured, the request succeeded for tunnel-group "MCSO-mobile."

  6 August 30, 2011 10:44:39 172.18.4.7 67 172.18.1.46 67 Built UDP outgoing connection 30957 for Internal:172.18.1.46/67 (172.18.1.46/67) at identity:172.18.4.7/67 (172.18.4.7/67)

  7 August 30, 2011 10:44:39 192.168.6.1 built ISP1:192.168.6.1 local-home

  6 August 30, 2011 10:44:39 172.18.1.46 1 192.168.6.1 0 built outgoing ICMP connection for faddr gaddr laddr 172.18.1.46/1 172.18.1.46/1 192.168.6.1/0

  6 August 30, 2011 10:44:41 172.18.1.46 67 192.168.6.0 67 Built UDP outgoing connection 30960 for ISP1:192.168.6.0/67 (192.168.6.0/67) at Internal:172.18.1.46/67 (172.18.1.46/67)

  6 August 30, 2011 10:44:42 192.168.6.1 0 172.18.1.46 1 connection disassembly ICMP for faddr gaddr laddr 172.18.1.46/1 172.18.1.46/1 192.168.6.1/0

  7 August 30, 2011 10:44:52 IPAA: message received 'UTL_IP_DHCP_INVALID_ADDR '.

  4 August 30, 2011 10:44:52 IPAA: could not get the address of the local strategy group or tunnel-group pools

  Well, your config looks good. You also upgrade the operating system? Maybe you hit a new bug.

  I heard no problems after the installation of a license, but it might be interesting to open a TAC case and learn if you hit a bug.

• Can not get the comments DHCP server to allocate addresses on VMNet1 Host-only network

  Hi all

  Hoping someone can help with this question, here's my virtual machine configuration basis up to now:

  -Windows 2012 ADDS, DHCP, DNS server

  -Windows XP client

  The two guests use the network to host only VMNet1 and DHCP is disabled through work stations.

  The problem I have is that my Windows XP computer cannot get a 2012 server DHCP address and she comes back with the link-local address of 169.x.  If I configure my Windows XP machine with a static address on the same subnet as the two computers are able to communicate without problem, so I'm not sure where I'm wrong.  Wireshark shows the broadcast DHCPDiscover packet, but nothing is returned.

  These adapters have certain limits they can treat broadcast packets?  Or am I really missing something here?

  Any help is greatly appreciated.

  Thank you!

  Did you check the configuration of your Windows Server 2012 DHCP server? The scope is active? The server is OK?

• Automatic update on Win 2012 R2

  Hi, auto update doesn't seem to work on Win 2012 R2 server. (used as a workstation)
  Firefox ESR 24.6.0 and I expect an update to the ESR 31 or at least 24.8.

  Allows app.update.log and here the URL he checked who have no available updates.
  https://aus3.Mozilla.org/update/3/Firefox/24.6.0/20140609182057/WINNT_x86-MSVC/en-us/ESR/windows_nt%206.3.0.0%20 (x64)/default/default/update.xml?force=1

  No idea why? should I file a bug?

  The ESR team Nick said:
  Updates of 24.x.y to 31.2.0 have been disabled because of crashes on startup in some situations. They will be activated to new once 31.3.0 the ship, which is scheduled for Dec. 1. There is no known issues with the update server configuration.

• Client cannot get the external IP of DHCP address through WiM

  WISN 5.2.178.0

  6509 12.2 (33) SXH2a

  WISN is in place, 1231 & 1131 joined APs, radio stations upwards, the customer associated but not an IP address.

  Virtual interface with vlan # & IP on the destination VLAN.

  WLAN with same vlan # as above.

  I tried Open, PSK, WPA. Client cannot obtain an IP address.

  What did I miss?

  You have the virtual address set to 1.1.1.1?

  Also, you have set up the address of the DHCP server on your interfaces VLAN? This is important because the controller basically uses an ip helper address to properly forward DHCP requests.

  If you have these configured, try to use the internal DHCP server to test. The web GUI, access controller-> the DHCP server in-house. Configure a DHCP scope and activate it (don't worry, it is only used for wireless clients. It does not meet the DHCP requests on your network).

  Now, go back to the controller-> Interfaces and configure the DHCP server to the management interface of the controller. See if your customers are able to get the addresses of the internal scope.

• Impossible to install VMware tools in Win 2012 R2 guest

  Hi all

  just upgraded merger 7.0.1 for 7.1.0 because I thought that he could solve this problem:

  After you have configured the client Win 2012 R2, I try to install vmware tools, choosing the option in the VM menu. But I always get the message "not available for this customer to vmware tools" (hope translation is exactly the same of my installation of German fusion...).

  Only the seams Win 2012 R2 to be affected. Linux, OS X, Win XP/7 works fine.

  Any idea?

  Thank you, david

  I met the same problem.   You need to do a manual installation of the vmware tools (http://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=1003417).

• EMCC OUI(Win 2012) does not restart after updates.

  Hello

  I am trying to install the EMCC 12.1.0.4 on a virtual machine in Windows Server 2012 hosted on an ESXi server. Previously installed without getting updates completed without any problems. Because some features did not work properly, I decided to install once more and also get updates from Oracle. I followed the directions of advanced installation. The virtual machine has been reset to the stage before. So no installation is dirty.

  After getting updates and display the patches Oracle Setup calls a Windows saying that the installer will be restarted. But it's not. I waited and waited, but nothing happened.

  Newspapers shows the first steps after the restart and no other error. I tried several other approaches:

  1. download the updates from the server to install and use my credentials for Metalink

  2. use the option - ignoresysprereqs

  3 use the option - showProxy

  4. download updates on another server using the option - downloadUpdates as the copy on the server to win 2012.

  In all cases the same behavior:

  After you click OK in the windows message saying that will follow a restart of the installation, the installation program restarts, a command window is displayed for 1-2 seconds, then everything stops.

  I have everything running as administrator.

  See below the last lines of my log file of the inventory from the last test.

  INFO: 18.05.15 13:12:05 CENTRAL: already downloaded updates is selected.

  INFO: 18.05.15 13:12:05 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:05 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  INFO: 18.05.15 13:12:05 CENTRAL: all the fields are valid

  INFO: 18.05.15 13:12:05 CENTRAL: POPUP of WARNING: Das Installationsprogramm wird neu gestartet.

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug 14045804 YES

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug OPatch-1

  INFO: 18.05.15 13:12:17 CENTRAL: XML download location: null

  INFO: 18.05.15 13:12:17 CENTRAL: the file path is C:\Users\Administrator\defaultProperties.PROPERTIES

  INFO: 18.05.15 13:12:17 CENTRAL: Scratch Path = C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46 h

  INFO: 18.05.15 13:12:17 CENTRAL:-scratchPath

  INFO: 18.05.15 13:12:17 CENTRAL: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM

  INFO: 18.05.15 13:12:17 CENTRAL:-sourceLoc

  INFO: 18.05.15 13:12:17 CENTRAL: C:\temp\emcc_install\install\... /stage/Products.Xml

  INFO: 18.05.15 13:12:17 CENTRAL: sourceType.

  INFO: 18.05.15 13:12:17 CENTRAL: network

  INFO: 18.05.15 13:12:17 CENTRAL:-timestamp

  INFO: 18.05.15 13:12:17 CENTRAL: 2015-05-18_01-07-46 H

  INFO: 18.05.15 13:12:17 CENTRAL:-ignoresysprereqs

  INFO: 18.05.15 13:12:17 CENTRAL: RESTART command: line cmd /c C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/install\setup rscratchPath - C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM - rtimestamp 2015-05-18_01-07-46 h - rstartupLoc c:\temp\emcc_install\install-redemarrer - ouifromLocation C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\products.xml - ouiResponseFile C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\Response\oracle.swd.Complete.rsp - ignoresysprereqs - paramFile C:\Users\ADMINI~1\AppData\Local\Temp\2\ OraInstall2015-05-18_-07/01/46 PM/temp.ini - jreLoc C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\jdk/jre - J - Doracle.installer.extjre = false

  Test auto-updates to date: using paramFile: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\temp.ini

  Check the swap space: must be greater than 150 MB.   Real 5625 MB passed

  Monitor: must be configured to display at least 256 colors.    4294967296 real past

  The command line to decompress:

  C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1\install\unzip - qqqo... \stage\Components\oracle. SWD.oui\12.1.0.1.0\1\DataFiles/"*.jar" d "C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM" INFO: 18.05.15 13:12:22 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:22 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  So, if someone met sam ahint problem would be appreciated.

  Best regards

  Cantemir

  Hello

  a realization to the description in my question:

  The list of patches to install was the following:

  Patch 19337487 for the Service of management of Oracle for 12G

  Patch 19003055 for the Service of management of Oracle for 12G

  Patch 19519190 for the Service of management of Oracle for 12G

  BASIC 20392036 ENTERPRISE platform MANAGER - SGD 12.1.0.4.3 PSU (GENERIC)(System Patch)

  Updated 14045804 YES

  And I was able to capture the contents of the command window that appears for 1-3 seconds prior to YES.

  Are more errors saying:

  ...

  error: cannot remove the old c:\Users\Admini~1\AppData\Local\Temp\2\OraInstall2015-05-18_02_04_18PM\oui\jlib\xml.jar

  ...

  YES updates patch would probably come in conflict with the running configuration.

  In any case have not yet no solution.

  Cantemir

• Adding a DHCP server in my virtual environment so my virtual stuff get IP, instead of vmware dhcp

  Hi all

  I do a laboratory test where I need DHCP Server1. 2 3. ADDC and DNS of the client machines and exchange 2003 environment. I want it to be fully functional and I want my DHCP server to assign the ip address of my entire network, but I don't see any option to add my dhcp in this environment, I tried, but virtual machines take ip from the dhcp server on VMware builtin, could someone guide me how can I make my dhcp added to this environment?

  Eventually this environment will be upgraded for 2013 Exchange and windows 2012r2.

  You must assign a static IP for your DHCP server... after that, try to restart the DHCP service and see if your stations get IP... otherwise, confirm that your DHCP server is authorized on AD.

• Virtual machines do not get IP address from the DHCP server

  Hello! I just spend Xenserver to ESXi. Created a couple of virtual machines and none of them gets an IP address from our DHCP server (DHCP server is a physical PC), and instead, they get a number of internal 192.168.x.y allowing connection to the internet.

  Looks like a way to do this is to install a virtual machine that is a router, as M0n0wall, and route traffic to connect to the external network and finally to access internet. But this is not what I have to do.

  I need to have virtual machines that are server to get an IP reserved for our DHCP server, and then our local windows client should be able to access it directly.

  I searched on google and forums for this but I can't seem to find how to configure virtual machines to directly belong to our local network.

  I thought that VMware would have a simpler way to do so than XenServer, but I was stuck on this one day now and really frustrated as I get not before with this project, stuck on this little problem... sigh...

  Thanks for your help.

  GER.

  ESXi does not IP addresses to the virtual machines it host - if the virtual machines are not able to access your physical network than that of the thw two virtual machines acts as a DHCP server - now to the question of network - if you are not able to reach the virtual machines on the physical network or achieve fitness network virtual machines , then there is a problem with the physical connection to the ESXi host, possibly the configuration of the physical port that connects to the - is a way to test this theory to assign an IP address on the same network that the management port - if you are able to access the virtual machine, then you know that the problem is with the switch port.

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!