Diagnosis of the monthly material hangs on the checkerboard Test

Similar Questions

• Diagnosis of the accident saying IOS 9.2 and iPhone6 when I'm not under 9.2, or using a 6 my question is in short I'm bugged? I'm sure I'm for other reasons, the phone watching me as these accidents happen? I'm on a 5s

  Diagnosis of the accident saying IOS 9.2 and iPhone6 also in descriptions of lately, I'm not under 9.2 or using an iPhone 6 my question is in short I'm bugged? I'm sure I'm for other reasons, the phone watching me as these accidents happen?

  also, I am ware as a result of an update removes spyware.

  Thanks for the info on remote monitoring would be of use to me, indicator of proximity is clearly red on and off the power for minutes at random, yes hot phone, noises, yes 100%, I think just I see their device?

• My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  My computer makes a clicking noise at random - in the diagnosis of the Apple what is the meaning of error 4HDD/30 / 40000005:SATA (0,0) Please?

  Several clues:

  1. HARD and SATA drive in the message... On the way SATA HARD drive
  2. Clicking noise, which is an early signal of imminent death for HARD drive (there are only two types of readers... those who died and those who will be)

  I would like to start keep good clones (CarbonCopyClone, bombich.com, $40) for external drives or backups Time Machine.  Any backup of the drive, not just your favorite parts.  Perform backups on a schedule without fail IMHO.

  You can also start to consider a SSD at macsales.com (their mercury collection is highly recommended) or a new HARD disk, at least start planning if the SSD cost is worth the benefit of speed on the HARD drive.  You can buy it later.

  Just my paranoid approach to this situation.

• HP Envy x 360-m6-w102dx: primary HARD drive Bay * failed the Diag Test

  Hello

  When I turned on my laptop this morning, he showed a black screen with text showing "an imminent failure" and run diagnostics. I ran diagnosis on everything, and when he came on the hard drive, it showed a failed test of "Primary hard disk 1 HDD Bay." I tried to contact HP support and all led here. I am very inexperienced with computer problems and would like to find a solution to this. If it helps, the failure ID is 0GC3HW - 7P881T - GXGJMF - 60DT03. That failure came from a SMART hard disk check and I don't know if this seems to indicate a failure of the hard drive and I don't know what else to do. My laptop cannot start and there is no lead back me to the screen black with the same texts when I turn turn it back on.

  Mfortuno, welcome to the forum.

  The SMART test does not, therefore, you have a failing HARD drive.  The only solution is to get it replaced.  If you're not compfortable with opening the case of your laptop, you should take it to a computer repair shop called.  While I'm not a big fan of the Geek Squad, they sell HP computers and know them well enough.  You should buy a HARD drive that is the same size or larger and the recovery media can work.  In my view, that it is a video that allows you to install the SSD or HARD disk.

• iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

  I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

  The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

  Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

  NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

  At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

  From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

• PCI-1588 fails the self-test and reports error-50550

  I install the drivers for my card NI PCI-1588 and I get the following error:

  The device of that test has failed. From the device driver error report is as follows:

  Error-50550 occurred at the self-test

  Now, I normally don't get angry when I see a mistake, but when the error code is undocumented I said, why?

  In any case, my event viewer says:

  LabVIEW information: error: 400 'Bad Request' for 'deletetree', file ' ': unsupported protocol.

  [nitsuu] [[NO-Sync]]  Fatal error:.\source\nitsu\service\tDriverInitializer.cpp:80 - an error is causing this device OR Sync to the failed to initialize, error-50550 code

  Has anyone else seen this error?

  I'll try to change the location in which my PCI card has been installed, but I would appreciate some debugging info.

  Thank you

  The self-test would occasionally fail my last update... after reinstallation of windows and the only solution I've found that never fails is to go to Device Manager, uninstall the device from there (do not delete the source files for the driver), and then rescan immediately a new material.

  Then it would work in data acquisition!

• Diagnostic test error: drive hard hitachi failed the diagnostics tests

  My computer is a HP Pavilion 6500 series; Windows 7 64-bit. under 18 months.  Receipt of the following error messages to a HP diagnostic test: drive hard Hitachi failed the diagnostics tests: test to look at random; funnel seek test; surface scan test. Please notify.  I need to replace the hard drive?

  Hi Pete,.

  You are welcome.

  It is difficult to say exactly why the HARD drive started to fail and there's always a random item concerned - I've known a few hard drives fail after a few weeks, while others can be quite happily far longer than expected.

  Best regards

  DP - K

• Firefox crashes when I remove the message "Test Pilot"

  As I rebooted my PC (IBM thinkpad T43 running windows XP), Firefox sticks a message on the screen, heading ' new study test pilot ' with the message 'test pilot 'Firefox Desktop Heatmap 2012' is about to begin.
  I can't get rid of this message. If I click on the Red to close X, or the message "Details" Firefox crashes and I get "we're sorry, Firefox has a problem and crashed. How can I clear this message without crashing? Thanks for the info, John

  Yesterday I received an email informing me of the latest beta of Firefox was ready. I have currently in progress (version 13.0b1) and can confirm that this solves the problem. I no longer get the message that has been obscuring the corner of the screen. Thanks for the extremely fast response... I get that the speed of reaction on I pay a product support contract. -Cheers, John

• Satellite M40: Modem fails the diagnostic test on WinXp Pro

  Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.

  What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.

  Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out

  Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.

  Thank you
  Oumy

  Hello

  Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  They are a lot of drivers for countries individually.

  In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.

  Good bye

• How to: use the HP Test Fax Service

  Did you know that HP has a test fax service in which you can test sending and receiving a fax. This is particularly useful if you have a problem sending or receiving. Alternatively, you can isolate the issue is on your end or the other end. If you can successfully send a fax and receive an everything using the Test Service of fax HP, this means that your fax is working properly. If you're still sending or receiving from other chances to fax numbers that the problem is on their end.

  How to use the Fax Service to Test HP - HP Officejet Pro 8500 first All-- One A909n Printer in

  How to use the HP Test Fax Service

  I hope this helps someone. If anyone has any questions about the service or fax problems, I'd be more than happy to help.

• Delete the results if the user wants to redo the last test

  Hello

  I'm trying to implement a local user to ask them if they want to repeat the last test that failed. So then... Delete the result, and then rerun the sequence.

  Can you see what I'm doing wrong?

  Chris

  Have you seen this example?  It works for you?

  http://www.NI.com/example/27153/en/

• Cannot send command via the VISA test panel in MAX

  Hi all

  I have a small question by using the VISA test panel in MAX.  I try to send a simple command to a device and then retrieve the response data.  I am able to do this successfully through Labview, but for some reason I can't get a good answer in MAX.  The command I sent you is merely a letter (unit address) followed by an end of line character (\r\n in ascii).  In MAX, I simply adding \r\n on the string sent in the buffer (end send on written == FALSE).  All parameters of series are the same as what I have in LV (19.2, 8-n-1).  Someone at - it ideas?  It of a bit frustrating that I just want to make something simple and do not want to have to build a whole routine in LV to do this.

  Cheers, Matt

  Oops!  Dysfunction of the user.  I was so positive that I sent a term of constant line that I don't look my own code.  In this case, it's a new line!  Duh!  Thanks for trying to help with this arrow.  Sorry to waste your time.

  Cheers, Matt

• PCI-6224-88302 during the self-test error code

  Hello

  I'm having a problem with the auto test my card PCI-6224 in my computer. I am able to run 2 different tables successfully on 2 different computers, but this computer is that it seems to give me trouble.

  When I open NI MAX to run the test, it gives me a code error-88302 and explains the problem with the connection. I have tried unplugging the DAQ for my circuit and rerun the test but got the same error.

  How can - I have worse to pull this problem to take my next steps to solve this?

  Thank you

  Brandon Deal

  Yes, at this point, it sounds like a software on this particular calculation problem - most likely a problem with DAQmx. What version of currently installed DAQmx? When you try the first troubleshooting steps that I recommended, don't you just fixed DAQmx or upgrade to the latest version of the driver? If you just fixed your existing installation, you can try upgrading to DAQmx 9.8 instead. You can download DAQmx 9.8 from the link below.

  NOR-DAQmx 9.8

  http://www.NI.com/download/NI-DAQmx-9.8/4297/en/

  Alternatively, you can try to reset the MAX configuration data. It is rare for this to happen, the MAX configuration database may be damaged, which may cause sytem problem as you can see. Follow the steps outlined in the document below to reset configuration data.

  What is the process to reset the MAX Database?

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  At this point, it is probably just a matter of identifying what software is defective/corrupted and repair/reinstall. You can continue to try to do for this machine, or if you have another machine of work available, you can switch to this computer - depending on what is most convenient for you.

  Kind regards

• VI Analyzer Questions: Change the default test configuration and screw "Pavilion".

  I have two things I continue to come through in VI Analyzer:

  1. are there in any case to set the default VI Analyzer so that it applies to all projects, I'm working on that?

  I tried to create a task in project A, registration of the configuration and any attempt to open this file in project B, but it says that the file could not be loaded. The reason for my question is that there are a few default options that just add errors that we don't care (e.g. Controls dialog on the façade - 99% of the LabVIEW code that we are working on is called from TestStand as code modules, so the front panel doesn't really count)

  2. can I score / report some screws as 'safe' for parser tests?

  Basically, some screws may fail some perfectly safe way VI Analyzer tests (e.g. non-stanard errors on a 'closing' VI, who doesn't have a case error structure so that the device always gets closed). I wish I had a way to mark the VI kind VI Analyzer would ignore this particular test. This would allow me to have a rule that says something like "before any construction, run the file configuration VI analyzer and make sure there is not error", as opposed to "run VI Analyzer and examine errors, decide whether or not they are important for the VI in question..." ». An extension to this question would be how do I perform a task VI Analyzer before building when the VI Analyzer screw do not accept files cfg for project based tasks.

  Any help would be greately appreciated!

  Thank you

  Shaun

  1. a project oriented .cfg file cannot be transferred between projects.  Could you possibly create a .cfg unrelated to the project file (under the option 'Start a new task' on the first page of the VI Analyzer) and use it?  He would have no file in the list, but it would have all of the configured tests as you want.  And you could start with this on your different projects .cfg file... you would just add screws based on file (on page 2 of the VI Analyzer), rather than have all come to you in a .cfg project-based.

  2. on page 4 VI Analyzer, you can exclude certain tests to run on some screws and save these settings in a .cfg.  This option is also exposed in the VI Analyzer API with VIAn exclude the VI.vi Tests.

• the dst test failed

  Hello!

  I'm from the Philippines and I have a laptop G61 bought of the Canada.

  This week I was freezing and crashing issues. It started with extended stop screen then the next time I went there on all programs break and so windows Explorer. The mouse pointer still works, but everything froze, I've also noticed that "read" flashes at 5-8 second interval.

  This phenomenon is persistent even on safe mode.

  I run a diagnostic on it and on the test HARD drive he showed fails with an error RG9208-4D6RR-XD03GK-6OUM03 code

  Product ID:
  VU182UA #ABC

  I then run diagnostic test in the bios and the short test has been done, but when he changed the test for a long time he showed "HDD full 303.

  I really need help on this, this means the laptop HARD drive rplaceement? How can I recover the files if that is the case?

  Thank you!

  Address

  Hello address,

  Both the error codes and your description of the show all indicate that the hard is defective and must be replaced.

  If you want a guide on replacing the hard drive yourself, let me know.

  About your existing files, here are some options you can try.

  1. one possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files. 

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  2 another option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K