Diagnostic test to check if the crossfire works correctly
GPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/
Never be afraid to ask. This forum has some of the best people in the world to help.
Tags: Windows
Similar Questions
-
How can I check if the hardware works correctly?
How can I check if the hardware works correctly?... including fans, hard drive, cd players, etc...
Hello
I suggest you to generate system health report to check if the system is working properly. To run the system health report, follow the steps below.
1. click on start
2. go in Control Panel
3 go to the Tools and performance information
4 search for Advanced Tools in the left panel of the window.
5 go to generate a system health report
You can also check the material status of the devices in the Device Manager. Follow the link for more information on the Manager of devices below.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
-
How to check if the deduplication works correctly
Hi all
I understand that deduplication securefile is for the same column. Suppose if I have 2 identical data in a column, say one, with the size of 4000 bytes, the deduplication makes stores only 4000 bytes instead of 8 000 bytes table. From sqlplus, how can I check if this particular column takes only space to 4000 bytes instead of 8000?
Kind regards
ValValerie Debonair wrote:
How can I check if this particular column takes only space to 4000 bytes instead of 8000?
You can't exactly check without looking at the discharge of the LOB segment. It is easier to just check LOG segment does not increase when you insert the same LOB values:
SQL> DROP TABLE T1 2 / Table dropped. SQL> CREATE TABLE t1( 2 C CLOB 3 ) 4 LOB(C) STORE AS SECUREFILE 5 / Table created. SQL> SELECT SEGMENT_NAME 2 FROM USER_LOBS 3 WHERE TABLE_NAME = 'T1' 4 AND COLUMN_NAME = 'C' 5 / SEGMENT_NAME ------------------------------ SYS_LOB0000077372C00001$$ SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 / 1 row created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077372C00001$$' 4 / BYTES ---------- 1245184 SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 CONNECT BY LEVEL <= 100 6 / 100 rows created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077372C00001$$' 4 / BYTES ---------- 2293760 SQL> DROP TABLE T1 2 / Table dropped. SQL> CREATE TABLE t1( 2 C CLOB 3 ) 4 LOB(C) STORE AS SECUREFILE( 5 DEDUPLICATE 6 ) 7 / Table created. SQL> SELECT SEGMENT_NAME 2 FROM USER_LOBS 3 WHERE TABLE_NAME = 'T1' 4 AND COLUMN_NAME = 'C' 5 / SEGMENT_NAME ------------------------------ SYS_LOB0000077375C00001$$ SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 / 1 row created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077375C00001$$' 4 / BYTES ---------- 1179648 SQL> INSERT 2 INTO T1 3 SELECT LPAD('A',10000,'A') 4 FROM DUAL 5 CONNECT BY LEVEL <= 100 6 / 100 rows created. SQL> COMMIT 2 / Commit complete. SQL> SELECT BYTES 2 FROM USER_SEGMENTS 3 WHERE SEGMENT_NAME = 'SYS_LOB0000077375C00001$$' 4 / BYTES ---------- 1179648 SQL>
SY.
-
How can I fix a customer Launcher.exe gambling problem which could cause it to stop working?
The Client Launcher has no openings of the problem and update games reviews, events and the server info maint. etc., by clicking on the game where is installed the client takes me to this start page of games. But that's all. From there, I click the START GAME button and immediately the Game Launcher stops working. Then the pop-up message running runs saying A problem with launcher did stop working. This problem report has been sent to Microsoft. The Windows notification Qmessage closes leaving the Message of Microsoft Windows. Says that Microsoft will inform me with a solution when it becomes available.
In courses now since mid October 2010 and the problem is still a problem. Here are the details of what I tried.
Solutions provided by the Support Help Desk game still worked so let my forced. and still in treatment.
I completely uninstalled and reinstalled the game client and game more then enough time and that did not help. Even tried mirror download sites.
Windows Vista is up to date, the hardware and the drivers are all up to date. System requirements to run the game is ok. (I triple checked cause the game worked initially.) I could even play other games in the game Client. One day, while he was playing in the game he closed and stopped working. A bit like you have been started from the server). Since I could open the client and click on a game to see. clicking on start game triggers the Launcher of client to stop working.
I cleaned up my registry and it fixed and did a cleaning disc.
I read every help file in the hope of finding something or something, anything that would be useful. Impossible to find a solution.
I used the recording of events where there is a link Option to support for the error that occurred dansMon event systems online. There was no solution available.
I have reviewed the troubleshooting on the Microsoft TechNet site. Cannot find the fix there either.
I've exhausted all my resources I can think.
So if there is someone who can help me solve this problem once and for all, my son and I'd love to hear from you.
Thank you...
whoknowsu...
Hello
Please try to install the game in compatibility mode. Here is some information that can be very practical...
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
-Check the functionality of the game under a spare user account
Uninstall/reinstall the program
-Clean Boot http://support.microsoft.com/kb/331796
I hope that this information is beneficial.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Title: original problems to access TV on Windows Media Center recordings
My media center has suddenly stopped working for recorded tv. Whenever I click on recorded TV, I get this message:
"Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
All other features of the media center work correctly.
Any help would be appreciated.
Hi vater19,
Remember to make changes?
Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference
Open the Setup TV tuner Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter
Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
The original title - the following message mean?
I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. 'Close program' is in a box for me to enter. What does that mean? What I'll do. I get this message for about a week now.
Hello
Read the solution proposed by Don Varnau at this link
Hello
Quick and dirty solution...
Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp
Check Add or remove programs for any of these programs and uninstall the program or turn off
automatic updates or to automatically connect or what similar feature you find.Hope this helps,
Don__________________________________
See you soon.
-
I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
So I appreciate any help you can offer.
Hi luv2shop,.
This problem may occur because of the conflict by the present security software on the computer.
I suggest you try the following steps:
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:
Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.
In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product
Description of the Windows Installer Cleanup utility
http://support.Microsoft.com/default.aspx/kb/290301
Step 3: Set the clean boot computer and try to install the program
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Important: n ' forget not the computer to start normal follow step 7 in the link.
If the problem persists, you can check with iolo for known problems
http://www.iolo.com/customercare/
Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available
Check if you have picked up malware in your travels.
I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/MBAM.phpSuperAntispyware
http://SUPERAntiSpyware.com/Check in safe mode.
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/See if you can isolate a possible cause.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!
Hello
It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us
Don't forget to restart your computer after you run it.
If this does not work, try to uninstall and reinstall the drivers for your printer.
If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)
I hope this helps!
Mithrandir
-
A program caused the blocking of the program works correctly
Hello
I developed using National Instruments LabWindows/CVI software and installed the .exe in a PC running Windows 7 32 bit with 4 GB of RAM.
When I run my software, sometimes I get the following error.
"A program caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.
It's very random, and sometimes this error never happens.
Can someone help me understand this issue please. I saw my software code several times and I am sure that I do nothing wrong in the software that causes this error coming.
Is this all related to windows and how can I solve this problem? Help is very appreciated.
Thank you
Sujith Fox
Sujith,
Given that you have developed this program, you should know better, but try to check for error events in Event Viewer
You can also publish in MSDN for assistance
-
Medal of honor allied assault has stopped working?
This message seems to me when I start the Medal of honor Allied:
(a problem caused blocking the program works correctly windows will close the program and notify you if a solution is available)
Hello
· How long have you been experiencing this problem?
You can reduce hardware acceleration and check if the problem persists:
1. right click on the desktop and choose personalize.
2. click on display settings.
3. in the display settings window, click on advanced settings.
4. display the Troubleshooting tab.
5. click on change settings.
6 reduce hardware acceleration.
Also try the procedure from the following link: http://windows.microsoft.com/en-US/windows7/Fixing-game-performance-problems
Also try to check if the game works the clean boot: http://support.microsoft.com/kb/929135
NOTE: make sure that you start the computer in normal mode after troubleshooting is done
You can also post your questions on: http://support.ea.com/
-
Problems with Skype message saying 'a problem caused blocking the program works correctly.
Original title:
Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs
Skype problems... message appears saying... A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. .. everythink popup say Incompatiable application... or so you are not connected to the Internet. I am connected to the internet as you can see it, so that is not the problem... I tried to uninstall Skype, reinstall... sometimes it will connect, then just stops. So, what should I do?
You use the latest version of Skype?
Technical issues & using Skype
https://support.Skype.com/category/tech/;JSESSIONID=4E8285AB5B23BE17D96D57F0C021F032Why can't I sign in to Skype?
https://support.Skype.com/en-us/FAQ/FA589/why-can-t-I-sign-in-to-SkypeSkype does not work right now, here's how to fix this
http://technolog.MSNBC.MSN.com/_news/2011/05/26/6722180-Skypes-not-working-right-now-heres-how-to-fix-it?GT1=43001Have you tried the Skype Forum?
Users help users of Skype for Windows
http://Forum.Skype.com/index.php?Act=IDXHow to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Do you also have this problem if you test with another Windows user?
-
Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.
What should I do next
Hello
- Are you referring to the NEC USB Floppy Driver?
- You try to format floppy disks?
- Was - this earlier work, if so, did the chnages on the computer before this problem?
If it worked, I suggest the following methods and check the status of the issue.
Method 1:
Open the hardware and devices troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Update a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
"a problem caused the blocking of the program works correctly.
I had Crysis 3, and every time I try to open a box comes up saying ' a problem caused the blocking of the program works correctly "and if there is no way to disable this would be great.
I don't know the name of the program that keeps pulling to the top of this box. I know that if I can disable my crysis 3 will work very well because I have to let go does not for a while.Reach
Monitor control Panel\All Control Panel Items\Action Center\Reliability
Click on the date and check reliability below details
Alternatively, you can run your game in clean boot mode. Need to restart the system after you turn off third and start-up services
http://support.Microsoft.com/kb/929135/en-us
Allow five or ten start-up services both to locate the faulty app requires a few reboots and a lot of patience ;-)
-
Mobile side. Using the drop down of your video. I once put some text on the Mobile page the Menu drops down, but behind the image. When I remove the text box the menu works correctly. This also happens with a HTML code placed to Paypal.
Please check layers panel and put in place the menu item in the list, you can use the layers panel and move up or attempt to move the content.
If there is still the same, then download a few screenshots of the design view.
Thank you
Sanjit
Maybe you are looking for
-
Tecra S2 bluetooth internal module
Where can I found out if it's possible to install internal bluetooth module PA3425U-1BTM on Tecra S2 model NUM. PTS20E-01W00MG3? Laptop was purchased in Europe (Slovenia)! P.S.: Where can I post a question for an expert... etc.
-
Tecra M9: WLan not working not - not displayed in Device Manager
I've updated the Bios with the latest version, I turned on the switch on the front of the laptop wireless. I also tried FN + F8 but still no joy. I have reset the default settings of the BIOS without change. The wireless light flashes when the comput
-
Laptop HP 14 14 - GOO6AU: Usb does not
Recently I bought this notebook.but no USB, no working.try searcing for the driver but still cannot be used
-
I press on and hold down the CTRL key, and then select each file to remove, but often find that my computer is copy them at the same time. I believe that to succeed when you delete individual files.
-
Programma meeste s reageren niet voortdurend
portable meeste of programma op mijn me programma laten meervoudig principled dat dat created reageert niet. Verder ook clean met Windows Media Player 11: codecs nodig voor het listen van music, waarschijnlijk missen, want ik kan geen muziekstukken o