CS6: Unique black frame between two elements should not be here...

Similar Questions

• I'm trying to put a Transition chained between two elements placed one above the other.  I tried and I failed.

  I'm trying to put a Transition chained between two elements placed one above the other. To the left of the line that she plays in the lower clip and after the line, he played in the clip above.  Is that it can be done when the two clips are on the other? I tried and I failed. Help please.

  Also how do you call this long line like?

  Thank you.

  simply put your 'top' clip where it belongs - in the scenario

  Select the clip, Option - command - down

  the secondary has no replacement for 'tracks '...

• How to add images between two elements

  I'm having a great time to find it.  I was asked to add an image between two elements.  Here's a mockup of what the layout with the image will look like:

  

  But I tried everything and I keep breaking the code and can't make it work.  I did a stripped down version of this page so you can see what the code looks like:

  Homepage

  Any help is appreciated.  Thank you.

  This will get probably get a bit of a hole - (MAKE A BACK-UP OF YOUR PAGE FIRST)

  Find the code below:

  http://www.amazon.com/Reclaiming-Parkland-Bugliosi-Assassination-Hollywood/dp/1626365334/r ef = sr_1_1? s = books & ie = UTF8 & qid = 1378592566 & sr = 1-1 & keywords = recovery + Parkland"> Amazon.com»

  Get rid of all the code that follows - down up to this code:

  The decline and fall of Jim Fetzer

  Copy and paste the code below instead:

  Image goes here

  Press articles

  Comments

  News

  Then style upward a little h2 tags with some css:

  I'll let you get back links/anchors on the h2 tags.

• Adfc-controller-config element should not

  Hi all

  This message is related to the adfc-controller-config element should not

  Follow https://blogs.oracle.com/jdevotnharvest/entry/how_to_configure_an_adf_phase_listener_and_where_to_put_the_file by Frank Nimphius

  ... indicates the contents of the ADF - settings.xml.

  In Jdev 12.1.3.10.8, the message "adfc-controller-config Element should not" rest

  

  If remove us the validation error, then the message has disappeared, and the application can run well

  

  Does anyone have a lead on this error?

  I don't know if we can ignore the error and remove the safely validation error in the application.

  Thanks in advance

  DAT

  The blog post, that you reference is quite old and to a previous version. When you use 12.1.3 you should look toward the top of the structure in the current doc for your version. It's at http://docs.oracle.com/middleware/1213/adf/develop/appx-adf-xml-files.htm#ADFFD2572

  and shows

  http://xmlns.Oracle.com/ADF/config">

  http://xmlns.Oracle.com/ADF/controller/config">

  SummitPhaseListener

  oracle.summit.listeners.SummitPhaseListener

  oracle.summit.MyHelpProvider

  myCustomProperty

  someValue

  which is a little different because it used different xsd to validate the XML.

  Timo

• Unique black frame

  Hello

  For some reason any, when I start the capture process, the structure of loop of producer/consumer below gives me the first image as being black (empty) with all following frames works very well. I don't know exactly why it does this. Any input would be greatly appreciated. Thus, the framework before it collects information about the exhibition or the gain of the camera and how many images is to grasp, should not really affect the capture process.

  Konstantine

  

  Konstantine salvation,

  The reason why you found it is a problem with the data flow, you put an element in the queue until the copy buffer image is completed. Try to combine all the sons of the error in the upper loop to enforce data streams.

• L2l VPN between two ASA5505 works not

  Let me start who I know a thing or two about networks.  VPN not so much.

  I am trying to configure a Site-toSite VPN between two ASA 5505.  I am building this in a laboratory of the Office before I deploy it to the end sites.  I are the indications on this very informative forum and think I have it set up correctly.  I can see the tunnel is being built and I see same incrementation of the traffic counters.  But the real user sessions do not seem to work.  For example, ping and telnet does not work.

  An excerpt from the syslog for a ping test on a computer on the remote end.

  (10.1.10.5 is the local computer, 10.1.11.5 is the remote computer.  10.1.11.1 is the interface of the ASA remote interior)

  6. January 20, 2012 | 01:04:12 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:04:10 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:04:07 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:04:05 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:04:02 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:04:00 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:03:57 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:03:55 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:03:48 | 302021 | 10.1.11.5 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0 ICMP
  6. January 20, 2012 | 01:03:46 | 302020 | 10.1.10.5 | 1. 10.1.11.5 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0
  6. January 20, 2012 | 01:03:43 | 302021 | 10.1.11.5 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0 ICMP
  6. January 20, 2012 | 01:03:41 | 302020 | 10.1.10.5 | 1. 10.1.11.5 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0
  6. January 20, 2012 | 01:03:38 | 302021 | 10.1.11.5 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0 ICMP
  6. January 20, 2012 | 01:03:36 | 302020 | 10.1.10.5 | 1. 10.1.11.5 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0
  5. January 20, 2012 | 01:03:32 | 713041 | IP = 192.168.24.211, initiator of IKE: New Phase 1, Intf inside, IKE Peer 192.168.24.211 address local proxy 10.1.10.0, address remote Proxy 10.1.11.0, Card Crypto (outside_map)

  This is the configuration for one of them.  The other is configured in the same way with the usual across settings.

  ASA Version 8.2 (1)
  !
  hostname ASATWDS
  !

  names of
  name 10.1.11.0 remote control-network
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 10.1.10.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 192.168.24.210 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  access extensive list ip 10.1.10.0 outside_1_cryptomap allow 255.255.255.0 255.255.255.0 network-remote control
  access extensive list ip 10.1.10.0 inside_nat0_outbound allow 255.255.255.0 255.255.255.0 network-remote control
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.24.1 1
  course outside remote control-network 255.255.255.0 192.168.24.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 10.1.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 192.168.24.211
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  card crypto outside_map 1 phase 1-mode of aggressive setting
  card crypto outside_map 1 the value reverse-road
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 10.1.10.5 - 10.1.10.36 inside
  dhcpd dns 209.18.47.61 209.18.47.62 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  tunnel-group 192.168.24.211 type ipsec-l2l
  IPSec-attributes tunnel-group 192.168.24.211
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:b4bea5393489da3aa83f281d3107a32e

  The Configuration looks good to me, but I think that you don't need next: -.

  card crypto outside_map 1 phase 1-mode of aggressive setting

  card crypto outside_map 1 the value reverse-road

  Anyway,.

  1 > can you please check if the computer you are trying to Ping or Telnet isn't the Machine based Firewall or anti-virus or iptables (Linux)?

  2 > dough out of the

  a > sh crypto ipsec his

  b > sh crypto isakmp his

  Manish

• Space between two words is not properly considered by WXE_AdjacentSpace!

  Hi, in my acrobat plugin, use the following line to judge if there is a space between two words as based on what I have to join two words.

  attrWord = PDWordGetAttr (pdWord);

  bHasAdjacentSpace = (attrWord & WXE_AdjacentSpace);

  But for the two words in a particular PDF document, it gives a correct result. Although visually, I see that there is a space between these words, but the above method means that there is NO space between the two.

  Could you please let me know what's going wrong here?

  Or if is there any other way to judge precisely the space between the two words, and if they need to be joined or not?

  You can get the bounding box (Quads) for each word you get home and they take your own decision as to the amount of white space is acceptable to join to...

• Could not send data to configuration ldap to libOvd for the instance of service 'idstore.ldap' - 'socketOptions' element should not

  Hello

  I have an installed WebLogic 10.3.6 with ADR 11.1.1.6 cluster.

  Everything worked fine until recently when I installed Web Tier 11.1.1.7 and associated with the instance of OSH with my WebLogic AdminServer EM.

  Now I can't start my managed servers, receive the below error message.  I tried to add "-Djava.security.debug = jpspolicy" to JAVA_OPTIONS strings in startManagedWeblogic.sh, but they do not get more information.

  JAVA_OPTIONS = "-Djava.security.debug=jpspolicy-Dweblogic.security.SSL.trustedCAKeyStore="/u01/app/oracle/Middleware/wlser\

  "Ver_10.3/Server/lib/cacerts" ${JAVA_OPTIONS} "

  Any advice would be appreciated.

  # < 26 June 2013 16:22:23 UTC > < critical > < WebLogicServer > < gds-dev-mt-1 > < ManagedServer_1 > < main Thread > < < WLS Kernel > > <><>< 1372263743069 > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed due to the exception, see exception stack trace or the log file of the server root. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: oracle.security.jps.JpsRuntimeException: JPS-02592: could not send ldap configuration data to libOvd for the instance of service 'idstore.ldap' in the context of JPS 'default', cause: oracle.xml.parser.v2.XMLParseException: element 'socketOptions' not expected not.

  to oracle.security.jps.internal.policystore.PolicyDelegationController. < init > (PolicyDelegationController.java:167)

  to oracle.security.jps.internal.policystore.JavaPolicyProvider. < init > (JavaPolicyProvider.java:369)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

  at java.lang.Class.newInstance0(Class.java:357)

  at java.lang.Class.newInstance(Class.java:310)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1024)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:879)

  at weblogic.security.SecurityService.start(SecurityService.java:142)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Layer Web 11.1.1.6 does not exhibit this problem.  Sex Web 11.1.1.7 patched the oracle_common and I feel is not compatible with ADR 11.1.1.6 or 11.1.1.7

• Share music between two people, but not to play count

  My iTunes library, I have more than 1000 songs. My library has increased since I got an iPod a few years ago, and now I listen to it 24/7 on my iPad. My brother and I have same taste of music, and he always listened to what I played when it was not a device. When I got my iPad, let him have my iPod, so we both had the same library (it is not yet have his own account), and our devices to sync past computer game account between our devices.

  As we grew up, he developed more than taste in classical music, particularly the soundtracks, I. That's fine, but he listens so that he starts to spoil some smart playlists that I have running on the game account. He no longer has the iPod, he listens just to music off of the iTunes library on your laptop, and I still have my iPad.

  My question is this: is there a way for us to have the same music but have his game will not carry more on my iPad? Better yet, have the same starting point for the music, but have any new music classic it does not add to move on my iPad but I add that he can still listen to the music? Something in this direction?

  If he needs to make an account to do this, it is fine. Have looked at the "creation of new libraries' and such, I am not quite knowledgeable on the subject. Everything that makes something like this possible would be much appreciated!

  Thoughts?

  If he has his own computer and simply listen to music via iTunes on this computer, then it should be possible.

  You can activate Sharing host iTunes on your computer and allow his computer to connect via iTunes home sharing of your library. He will then be able to navigate and play the tracks in your library. In iTunes home sharing preferences is an option to play counties puts is not up to date.

  If the two of you use the same computer maybe it's not feasible.

• An application that I guess should not be here...

  Found this in my Utilities folder this morning while in there to open the time Machine, I was wondering what the...?  Someone at - he seen this before?

  

  Of http://guides.macrumors.com/Terminal

  Terminal is a program included with all versions of Mac OS X. It is located in the Utilities folder of the Applications folder. At the launch, it provides a command line interface to control the foundations of the UNIX based operating system.

• TreeView: Line white between the two nodes are not appear

  Hi all

  I added a treeview control in my dialog plugin for InDesign CS3 and CS4.

  In CS4, it works fine but in CS3, I get a strange question.

  Question: A blank line between two nodes may not appear. See the image below

  I am referring to the white line which we can see in the InDesign paragraph style palette / all indesign sample as the Board treeview as shown below

  I tried this problem but has not found a solution

  Please help me solve this problem.

  Kind regards

  Alam

  I had a similar problem, but in the end, I couldn't figure how to remove the white lines.

  I have given up trying to remove the white and just changed the color of the treeview and everything that was drawn on the top in white.

  It was the only way I managed to hide lines.

• Want to only two elements of the page without a space between them.

  I give a broader and more generic framework to an earlier application seeking a broader response.
  
  I want two elements on the page without horizontal between space. (Don't ask why!) One is a contant, say ' * ' so I made a single display element. The other is the label of a numeric field that is referenced in the error messages generated by the ARF.
  
  Call the label LABEL to make this easy. So, I want to see {noformat} * {noformat} LABEL. I don't want to change the label of "* LABEL" because ARF refers to "* LABEL" in error messages. I want to just fix the two elements on the form. This must be something easily done in the APEX, right?
  
  (For the initial application, see asterisk desire by a label point of page without space between. .)
  
  Thank you and God bless you,
  Howard

  Hello

  Just change your article networking sessions (if you use apex 4.2)

  Start the new grid: No.
  Start the new row: No.
  New section: No.

  FYI, you may need to use

  & nbsp

  in your point label to get a space

  If you use apex 4.1, I remember: new field should be no.

  Best of luck,

  Best regards
  Fateh
  -------------------
  If you think that my answer was correct or helpful to you, then please check the response as helpful or appropriate.

• What is the difference between the elements &amp; CS6

  What is the difference between the elements & CS6

  Title of the message was edited by: Brett N

  There are many differences, too many to list, really, but here is among the most important:

  1. the items comes with organizing base catalog. CS6 has the navigation bridge database file.

  2. the item editor has stripped versions of many of the same tools as CS6 a. same tools, fewer options.

  JavaScript:;

  3 elements editor has Quick and guided modes to simple workflow for the most basic editing needs.

  4 items does not support CMYK and has very little support for 16-bit images.

  For a more comprehensive guide, please see:

  FAQ: Why Photoshop Elements is less expensive? What is different about Photoshop?

• Black frame break in first / Inverted &amp; Shifted frame SpeedGrade

  PROGRAM:

  First Pro CC (2015.3)

  Last updated: September 27, 2016

  INSTALLATION PROGRAM:

  Chronology of 1080 / RED EPIC images. R3D files.

  QUESTION:

  Black frame break in first / Inverted & Shifted frame SpeedGrade

  I have encountered this problem after changing the settings of the source (shifted the balance of whites around all clips in the timeline). While color correction through direct link to SpeedGrade. The video would play very well, but when I stopped the video that the chassis of the break would be inverted colors, shifted to off on the side. I turned back on then to first and these same clips would be just black when paused. The thing is that I changed the parameters of the source on all clips, but only some are struggling.

  SOLUTION ATTEMPTS:

  I tried to reset all the settings of source for each clip back to "as shot", but the problems remain.
  
  The only work around I could find, (after trying everything!) was a right click on the clip, by selecting "Render and replace...". "This seemed to be the solution until I exported the sequence and the project fails each time once he hit these clips of issue.

  Help, please!
  Leo

  That's what I called at the beginning of this.

  Adobe PrPro CC 2015.0/1/2 were versions of project PrPro 9.x file.

  However, rather than release the next major release as CC 2016, they did something that broke so MANY of their users and has not yet said what it was they were doing. It is... irritating?

  2015.3 and now 2015.4 are project files built on version 10.x of the software... a major version upgrade! ... and not only a minor or 'dot' upgraded because they seem to be.

  They has not not wanted to bring SpeedGrade long... and without announcement, out 2015.3 with no command 'Send to SpeedGrade' Direct Link or process. When people immediately started screaming on this subject, they finally announced they don't think their number, many people used SpeedGrade and seems not worth it to upgrade to the new version...

  And... we are all invited to back to back like Olde to ranking through export EDL SpeedGrade and two folders of the media on this EDL in Sg, or export a flattened the chronology of project to go to Speedgrade too... then of course, export of another SpeedGrade file and replace the track flattened on the timeline with the media graduated.

  Or export a XML file from PrPro and taking to say the determination, along with... still... two media files or file flattened chronology. Do a power of attorney to the export process again (not the clever internal proxy thing) could also help, by using a flat file support to proxy, then re - link that to the original in PrPro media to complete the round trip.

  That all sounds easy enough, right? ....

  Of course, the other option is to simply use the new workspace of color, with the Group of workspace Lumetri clever UI. Which is really very good and very capable, especially if you are using a control box remote as the tangent of ripple or small Palette blocks. Or... a tangent Panel Elements, really nice but rather in the cost. It is quite achievable through the mouse, but a lot spiffier... more intuitive and able to work more fine, with a control surface.

  Now he's advantages and disadvantages. For works of single clip or a few clips that need really not correspondence of accurate shooting, it is very easy, convenient & fast enough. If you really tight & decently fast shot correspondence between a couple hundred shots, or several secondary, uh... it's... possible... but rather slow, shall we say, than SpeedGrade. In addition to not having a button/process corresponding to the shooting as SpeedGrade, you don't have a real 2-top monitor situation either. You can make sort of a up-2 workspace by using a new job - the separate Panel and plopping monitors reference and reading about it, using the chronology of reading in the reference monitor to define who discovers and main sequence to set the monitor of the program to the item you try to classify and to match that in the reference monitor... or... not.

  For MANY more small, simple projects, the Lumetri Panel is very very good. In pretty rough tests today, I would say the secondary Panel in the Panel of PrPro Lumetri is actually better to pull a tight key than SpeedGrade 2015.1, the latest release of SpeedGrade. Not a lot, but... a little better.

  And you can "stack" Lumetri as of the 'effects' on a clip, to get more secondary or make different parts of the process in different stages... However, the full workspace not Lumetri works with the latest projection (bottom) Lumetri in the effect controls panel, so for instances "earlier" on a clip, you go in the PCE, spin to the bottom of Lumetri effects and use these settings. And... your surface outdoor spiffy won't work with everything, but the last of them either. Huh.

  To move, you can use adjustment layers stacked above the clip, simply go to the color workspace, use the controls there and always Lumetri not use your surface. And Lumetri Panel with your mouse or pentab.

  Order of procession always things, so don't forget... in the effect controls panel, things are top of the process down. Among the witnesses of Lumetri, which also means descendant. Treatment of tips in the Basic tab, then stuff in the Design tab and down.

  Now... also as mentioned in a previous post... There is a nice 3rd party tool/applet a user of SpeedGrade Austrian colleague, Patrick something or other, for about 9 Euro... open, navigate to a project file PrPro, as records and converts the file into changing a (one) character... you use this file in 2015.1 SpeedGrade who thinks it's a file link Direct 2015.2 and therefore correct... and after completing , the application may then re - convert the file 'up' by changing this 1 a character return if 2015.4 sees it as its own file again once and not an earlier version which has need to upgrade.

  Fast... easy.... and seems to work well, with a caveat... AfterEffects "comps" do not always, so if you have those who, rather than to make a model of dynamic links in PrPro, make a direct export of the AE and use the clip exported on the timeline in Prpro.

  I haven't handled files r3d via this of course, but... others have probably, like hundreds of downloads of that file would probably include some red media users. Then I guess it would work, and you are welcome to try a trial download and see if it works for you. I just worked on a project today using this process, btw.

  It is mentioned in this link... and there is a LOT of information about this and other things of the recent changes in the nets of ten or higher in this forum.

  Project of creation/Speedgrade conversion tool

  Neil

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,