Dialing a number of IOS

Similar Questions

• iPhone 5-can't dial a number with Skype credit

  I loaded and set up my iPhone from iTunes 5 and he transferred transparently all my data and applications from my iPhone 4. When I tried to dial a number on Skype credit there is no result. I was allowed to call out on my old phone on my wireless network. The new phone is also connected via wi - fi. What do I need to uninstall Skype with the new phone and then reinstall? Any suggestions?

  I fixed it. I had to disconnect, then reconnect and it should now connect.

• How can I get rid of a notice titled "Safari Alert" that tells me to dial a number, but forbidden access to the i - pad

  How can I get rid of a notice titled "Safari Alert" that tells me to dial a number, but forbidden access to the i - pad

  It's a pop-up trying to rip you off. Clear your Safari cache. Settings-> Safari-> erase history and data from the Web site.

• Dial a number through rings PSTN three times before moving on to compose through the line

  Dial a number through rings PSTN three times before moving on to dial by phone line.
  I would like to Setup so that when I dial a local number through the phone line, but when I dial long distance call going VoIP.
  In our city to the Canada, we make a local call using the area code. e.g. xxx-xxx-xxxx
  Long distance is preceded by a 1 e.g. 1 xxx xxx-xxxx
  The numbering plan defined in 1 line numbering Plan: is (250xxxxxxx<:@gw0>| 1xxxxxxxxxx.)

  How can I make the SPA3102 immediately start dialing the local number without the three three apparently redundant rings?

  
  

• Citing the phone to dial a number

  I'm trying to dial a phone number of my app running on my BB Z10. I was able to launch the phone application and bring it to focus, but it does not dial the number. I have tried the following to dial in number 9999:

  navigator_invoke_invocation_create (& iRequest);

  navigator_invoke_invocation_set_id (iRequest, '1');

  navigator_invoke_invocation_set_action (iRequest, 'bb.action.DIAL');

  navigator_invoke_invocation_set_type (iRequest, 'application/vnd.blackberry.phone.startcall');

  "{" string data = '{\"number\': \"9999\ '} ';

  navigator_invoke_invocation_set_data (iRequest, data.c_str (), data.length ());

  navigator_invoke_invocation_send (iRequest);

  navigator_invoke_invocation_destroy (iRequest);

  I also tried sending as URI instead of the data :

  navigator_invoke_invocation_create (& iRequest);

  navigator_invoke_invocation_set_id (iRequest, '1');

  navigator_invoke_invocation_set_action (iRequest, 'bb.action.DIAL');

  navigator_invoke_invocation_set_type (iRequest, 'application/vnd.blackberry.phone.startcall');

  navigator_invoke_invocation_set_uri (iRequest, ' data : //local?number=9999 ");

  navigator_invoke_invocation_send (iRequest);

  navigator_invoke_invocation_destroy (iRequest);

  In both cases, the phone will appear but do not dial.

  You could do that.

  Phone phone;
  phone.initiateCellularCall(number);
  

  With the help of the class of phone.

  https://developer.BlackBerry.com/Cascades/reference/bb__system__phone__phone.html

• BlackBerry Smartphones Ouch: When I dial a number through address book I no longer get my contact list! 8703 e

  Instead, if Igo to the bar where you enter the name or number and press the wheel I have access to the "addess book call"... I press the wheel, then he goes "use once"... underneath, it reads * no addresses * above appeal when he reads "Personal" and this call:...

  I can not move personal wheel and when I went to companies via the options I am STILL unable to access my address book!

  When I dial a number known... the name is displayed.

  Very frustrating as I have hundreds of names that I have in the book necessary to maintain a school system go!

  And I tried pressing the sym, shift, and other keys to see if that makes a difference... NG

  Looks like a filter can be activated. Address book, click the wheel and go to filter. Clear all that is checked. If none of your contacts are associated with a filter, it's probably why you didn't see anything in the address book

• Dial a number with air for ios

  Is there a way to get a button to dial a phone number with Packager for IOS.  I tried 2 ways and none of them works.

  http://forums.Adobe.com/message/3813378

• Phone dials a number at random during an ongoing call

  My phone and my wife's phone has been randomly component another number during an active call. This causes the current call to give up without warning.

  I thought it was my accidental mistake until it happened to him, then it is true again and again on my phone.

  You should try an app like Tools of Droid of Tedd. It locks the screen while you are on a call, which will prevent the face dials. It locks the screen and prevents any entry through the screen while you are on a call. I'm not saying it's happening for sure, but it could be. This could be a good test for it. If the problem goes away when you use tools of Tedd Droid that I would say that what's happening is you're face composition.

  There's another app on the market that will do the same thing, but I don't remember the name of any other. I hope this helps.

• SPA3102 will not dial a number, or forward calls to Elastix

  For the past 2 days, I am trying to get this SPA 3102 to work as a PSTN gateway but no luck... My network is 172.16.1.0/24. My default gateway is 172.16.1.1 and local IP address of the SPA is 172.16.1.200. Elastix server is 172.16.1.8. I don't have any other VOIP providers so I na not configure my WAN for SPA settings (Nothing connected to the WAN port)

  Here are the screenshots and my config settings:

  The SIP Trunk settings:

  Outbound caller ID: 383579 (my local PSTN number)

  Chanels maximum: 1

  Name of the Trunk: pstn

  Parameters of peers:

  do not allow = all
  allow = ulaw
  Polycom = no
  context = of-RTC
  dtmfmode = rfc2833
  Host = 172.16.1.200
  incominglimit = 1
  NAT = never
  port = 5061
  qualify = yes
  secret = 300
  type = friend
  username = pstn
  Entrants settins empy rest under vacuum

  Road of basketing:

  DID number: 383579

  Transfer the call to ext: 205

  rest is default or is empty

  Line1 SPA is disabled because I want just difficulty dailing and receive phone calls.

  Here are a few screenshots of RTC in SPA line configuration:

  

  

  

  

  As see you in picture above I have sound but spa isn't answer...

  It comes from the phew journal asterisk call out:

  -[358291@from-internal:1] Macro execution ("SIP/205-087af3d8","user-callerid |") SKIPTTL | ") in new stack
  -Execution [s@macro-user-callerid:1] Set ("SIP/205-087af3d8", "AMPUSER = 205") in new stack
  -Execution [s@macro-user-callerid:2] GotoIf ("SIP/205-087af3d8","0?") report") in new stack
  -[S@macro-user-callerid:3] ExecIf execution ("SIP/205-087af3d8","1" | ") The value | REALCALLERIDNUM = 205 ") in new stack
  -Execution [s@macro-user-callerid:4] Set ("SIP/205-087af3d8", "AMPUSER = 205") in new stack
  -Execution [s@macro-user-callerid:5] Set ("SIP/205-087af3d8", "AMPUSERCIDNAME = Damir here") in new stack
  -Execution [s@macro-user-callerid:6] GotoIf ("SIP/205-087af3d8","0?") report") in new stack
  -Execution [s@macro-user-callerid:7] Set ("SIP/205-087af3d8", "AMPUSERCID = 205") in new stack
  -Execution [s@macro-user-callerid:8] Set ("SIP/205-087af3d8", "CALLERID (all) ="Damir Reic ' <205>' ") in new stack
  -Execution [s@macro-user-callerid:9] Set ("SIP/205-087af3d8", "REALCALLERIDNUM = 205") in new stack
  -[S@macro-user-callerid:10] ExecIf execution ("SIP/205-087af3d8","0 |") The value | Channel (Language) = ") in new stack"
  -Execution [s@macro-user-callerid:11] GotoIf ("SIP/205-087af3d8","1?") continue ") in new stack"
  -Goto (macro-utilisateur-callerid, s, 20)
  -Execution [s@macro-user-callerid:20] NoOp ("SIP/205-087af3d8","Using CallerID"Damir Reic" <205>" "") in new stack
  -Execution [358291@from-internal:2] Set ("SIP/205-087af3d8", "_NODEST =") in new stack
  -[358291@from-internal:3] Macro execution ("SIP/205-087af3d8","record-enable |") 205. OFF | ") in new stack
  -Execution [s@macro-record-enable:1] GotoIf ("SIP/205-087af3d8","1?") check ") in new stack"
  -Goto (macro-record-enable, s, 4)
  -AGI [s@macro-record-enable:4] performance ("SIP/205-087af3d8","recordingcheck |") 20090827 205946 | 1251399586.64 ") in new stack"
  -Launch Script AGI/var/lib/asterisk/acted-bin/recordingcheck
  recordingcheck |-205946 20090827 | 1251399586.64: outgoing recording not enabled
  -Recordingcheck AGI completed Script, return 0
  -Execution [s@macro-record-enable:5] MacroExit ("SIP/205-087af3d8","" "") in new stack
  -[358291@from-internal:4] Macro execution ("SIP/205-087af3d8","dialout-trunk |") 2. 358291 | ") in new stack"
  -Execution [s@macro-dialout-trunk:1] Set ("SIP/205-087af3d8", "DIAL_TRUNK = 2") in new stack
  -Execution [s@macro-dialout-trunk:2] GosubIf ("SIP/205-087af3d8","0?") Sub-pincheck | s | 1 ") in new stack"
  -Execution [s@macro-dialout-trunk:3] GotoIf ("SIP/205-087af3d8","0?") disabletrunk | 1 ") in new stack"
  -Execution [s@macro-dialout-trunk:4] Set ("SIP/205-087af3d8", "DIAL_NUMBER = 358291") in new stack
  -Execution [s@macro-dialout-trunk:5] Set ("SIP/205-087af3d8", "DIAL_TRUNK_OPTIONS = tr") in new stack
  -Execution [s@macro-dialout-trunk:6] Set ("SIP/205-087af3d8", "OUTBOUND_GROUP = OUT_2") in new stack
  -Execution [s@macro-dialout-trunk:7] GotoIf ("SIP/205-087af3d8","0?") nomax ") in new stack"
  -Execution [s@macro-dialout-trunk:8] GotoIf ("SIP/205-087af3d8","0?") chanfull ") in new stack"
  -Execution [s@macro-dialout-trunk:9] GotoIf ("SIP/205-087af3d8","0?") skipoutcid ") in new stack"
  -Execution [s@macro-dialout-trunk:10] Set ("SIP/205-087af3d8", "DIAL_TRUNK_OPTIONS =") in new stack
  -[S@macro-dialout-trunk:11] Macro execution ("SIP/205-087af3d8","outbound callerid |") 2 ") in new stack"
  -[S@macro-outbound-callerid:1] ExecIf execution ("SIP/205-087af3d8","0 |") SetCallerPres | ") in new stack
  -[S@macro-outbound-callerid:2] ExecIf execution ("SIP/205-087af3d8","0 |") The value | REALCALLERIDNUM = 205 ") in new stack
  -Execution [s@macro-outbound-callerid:3] GotoIf ("SIP/205-087af3d8","1?") normcid ") in new stack"
  -Goto (macro-sortant-callerid, s, 6)
  -Execution [s@macro-outbound-callerid:6] Set ("SIP/205-087af3d8", "USEROUTCID =") in new stack
  -Execution [s@macro-outbound-callerid:7] Set ("SIP/205-087af3d8", "EMERGENCYCID =") in new stack
  -Execution [s@macro-outbound-callerid:8] Set ("SIP/205-087af3d8", "TRUNKOUTCID = 383597") in new stack
  -Execution [s@macro-outbound-callerid:9] GotoIf ("SIP/205-087af3d8","1?") trunkcid ") in new stack"
  -Goto (macro-sortant-callerid, s, 12)
  -[S@macro-outbound-callerid:12] ExecIf execution ("SIP/205-087af3d8","1" | ") The value | CALLERID (All) = 383597 ") in new stack
  -Execution [s@macro-outbound-callerid:13] GotoIf ("SIP/205-087af3d8","1?") output ") in new stack"
  -Goto (macro-sortant-callerid, s, 11)
  -Execution [s@macro-outbound-callerid:11] MacroExit ("SIP/205-087af3d8","" "") in new stack
  -[S@macro-dialout-trunk:12] ExecIf execution ("SIP/205-087af3d8","1" | ") AGI | fixlocalprefix") in new stack
  -Launch Script AGI/var/lib/asterisk/acted-bin/fixlocalprefix
  > fixlocalprefix: using chart 0 + [0] [9] X.
  > fixlocalprefix: using mires NXXXXX 0 +.
  == fixlocalprefix: Dialpattern 0 + NXXXXX matched. 358291-> 0358291
  -Fixlocalprefix AGI completed Script, return 0
  -Execution [s@macro-dialout-trunk:13] Set ("SIP/205-087af3d8", "OUTNUM = 0358291") in new stack
  -Execution [s@macro-dialout-trunk:14] Set ("SIP/205-087af3d8", "custom = SIP/pstn") in new stack
  -[S@macro-dialout-trunk:15] ExecIf execution ("SIP/205-087af3d8","0 |") The value | DIAL_TRUNK_OPTIONS = M(setmusic^) ") in new stack"
  -[S@macro-dialout-trunk:16] Macro execution ("SIP/205-087af3d8","dialout-trunk-predial-crochet |" "") in the new battery
  -Execution [s@macro-dialout-trunk-predial-hook:1] MacroExit ("SIP/205-087af3d8","" "") in new stack
  -Execution [s@macro-dialout-trunk:17] GotoIf ("SIP/205-087af3d8","0?") bypass | 1 ") in new stack"
  -Execution [s@macro-dialout-trunk:18] GotoIf ("SIP/205-087af3d8","0?") customtrunk ") in new stack"
  -Execution [s@macro-dialout-trunk:19] Dial ("SIP/205-087af3d8","SIP/pstn/0358291 |") 300. ") in new stack"
  -Called pstn/0358291
  -SIP/pstn - 0885 has 138 sounds
  -SIP/pstn - 0885 has 138 replied SIP/205-087af3d8
  -Packet2Packet bypass 087af3d8/205-SIP and SIP/pstn - 0885 has 138
  -Remote UNIX connection
  -Connection to UNIX distance disconnected
  -[H@macro-dialout-trunk:1] Macro execution ("SIP/205-087af3d8","hangupcall:" "") in the new battery
  -Execution [s@macro-hangupcall:1] ResetCDR ("SIP/205-087af3d8", "w") in new stack
  -Execution [s@macro-hangupcall:2] NoCDR ("SIP/205-087af3d8","" "") in new stack
  -Execution [s@macro-hangupcall:3] GotoIf ("SIP/205-087af3d8","1?") skiprg ") in new stack"
  -Goto (macro-hangupcall, s, 6)
  -Execution [s@macro-hangupcall:6] GotoIf ("SIP/205-087af3d8","1?") skipblkvm ") in new stack"
  -Goto (macro-hangupcall, s, 9)
  -Execution [s@macro-hangupcall:9] GotoIf ("SIP/205-087af3d8","1?") theEnd ") in new stack"
  -Goto (macro-hangupcall, s, 11)
  -Execution [s@macro-hangupcall:11] Hangup ("SIP/205-087af3d8","" "") in new stack
  == Spawn extension (macro-hangupcall, s, 11) exited non-zero on "SIP/205-087af3d8" in the macro 'hangupcall '.
  == Spawn extension h (macro-dialout-trunk, h, 1) exited non-zero on 'SIP/205-087af3d8.
  == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/205-087af3d8"macro"dialout-trunk.
  == Spawn extension (of-internal, 358291, 4) exited non-zero on 'SIP/205-087af3d8.

  As you can see he composed, if found the dialing rule, but nothing happens on the SPA, it will not simply compose anything on.

  I guess that something is wrong in RTC spa or configuration of trunk, but I don't know what. I tried like 5-6 guides of strach and none worked for me. Any suggestions?

  Kind regards

  Damir

  HUH! I won't curse now, but I shoul!

  Given that I'm NOT using any VOIP provider and I JUST wanted to use RTC it makes SENSE I don't connect anything to the WAN port, BUT when I configured the WAN port with my LAN IP (172.16.1.200) and put a few other IP on the LAN port, everything started working.

  It's rly rly rly is NOT logical, but I got it working now.

• Can not dial any number, because when I press the call button, it returns the error message

  Dear friends, I am struggling to dial any phone number. When I press on the symbol of the dial, it immediately returns the error message 'arrested contacts' - ' o is parou - in Portuguese.
  I already tried to clean the cache and the data of all the apps, tried the hard reset and still the same error. What could possibly be wrong? The errors began after I composed a total of 16 numbers huge telefone number (XX XX xxx xxx xxx xxx). Could it be related to that?
  Thank you all!
  Billy of the Brazil!

  Hello

  Dialing a long number should not affect the Dialer in this way. I suggest you factory reset on your phone via the settings > Backup & reset > reset data. Before you do a factory reset, you might want to backup your data.

• Cannot dial another number (communication URA) after dialing a fax number.

  Hello.

  I have a HP 4500 (G510a-f alias). I need to send a fax, but before you send it, I'm supposed to call the second number to authenticate.

  When I try to do the display says he is busy. I tried to type in the number on a phone and then tried to fax feature.

  I'm completely crazy with the machine.

  You kindly advise?

  Thank you! »

  Hello

  Try to use the # key to add a break before continuing the numbering.

  For example, composition 9 #123456 will add a break after 9 to get the tone... typing # will add a pause of double length, etc.

  But the more you try dial manually by launching the dial itself first of all...

  Using the arrow keys select fax B & W, then click on the Start button.

  Confirm that the apges was analyzed according to the instructions on the screen.

  Now you should hear the fax get a dial tone, type in the number to authenticate... Once you hear the tone click target fax number...

  If any of these fail, I would say that the configuration of the name extension of fax to get an output line immediately if authentication, ay be too complex for an analog fax.

• Phone call and dial a number without confirmation to the user

  Hi Forum,

  I am trying to initiate a phone call from a Webworks HTML5 app. I don't want to use something like ... because it shows a confirmation dialog box that must be confirmed on the phone. I want to start the call with no other user interaction. Is this possible with the Webworks framework?

  This is my code:

  function docall() {
      blackberry.invoke.invoke(
          {
              type: "application/vnd.blackberry.phone.startcall",
              action: "bb.action.DIAL",
              data: "{'number': '0123456789'}"
          },
          onSuccess,
          onError
      );
  }
  
  function onSuccess() {
      console.log("Success");
  }
  
  function onError(error) {
      console.log("Error: " + error);
  }
  

  I tried a few alternatives for the attribute data as it send via the uri attribute:
  URI: ' data : //local?number=0123456789.

  Nothing really works. The onSuccess callback is called and it opens from the phone app, but no number is dialled. It shows just the last calls (probably because it's the first screen of the phone app).

  Is there something left? Can a webworks app dial without the intervention of the user more away?

  I am aware that the user must confirm a phone call. Otherwise, a developer could have the user dial any phone number they wanted.

• BlackBerry Smartphones A '1' is added to all my numbers when I dial a number.

  When I hit the reply to return a call, a '1' is added to the number so the call does not go through.  I have to call and Dial as if it were a new call. Even my own number with a 1 before it.  I can't find a post about it.  Any ideas?    Very annoying!

  Hi and welcome to the forums!

  Here we go:

  Press the green button once

  touch menu options OPTIONS TV - SMART DIALING - USE 1 for NATIONAL COMPOSITION

  Use of '1' for

  NO OPTION

  escape key RECORD

  If this answers your question please close the thread using the options of the Bravo star.

  If you need more information please ask!

  Thank you!

• BlackBerry Smartphones Blackberry HS-700 wireless headset will dial a number only

  I just got a new headset wireless for my blackberry curve. This is supposed to be new, in box. Now that it has set up and connected, when I command for dialing a call, he calls the same number... A number of area code 870 that I don't know. It doesn't matter what I say.

  The number was not in my contacts. I looked online and it was in a place in Canada Alberta. I think the helmet that was sold to me as new had actually to be used before and it was a number of that whether he owned previously. I think that nobody has referred to the shop because it could not get other abbreviated numbers.

  However, I continue to play with it and tried just by holding down button of the voice for a long time, until the light has stopped flashing. Then I read on the forum while holding the button a good two seconds before trying to make an appeal. Remove the connection, paired again, then hold the button long enough for my cell phone screen to say "call initiating. It now seems to work fine.

  Sheesh.

• Time to dial a number

  Can we extention time to compose on a phone. For example, dial 8, to activiate outside the line, dial the area code, then look further to find the rest of the number, at the time where find you the rest of the number, the display is turned off, if you do not pick up the handset, or if you picked up the handset, it comprised the 4 numbers and saids that cannot complete the call. Can we increase this time by user?

  Hello

  Yes, this time can be increased. It is called the T.302 timer in CUCM. You can increase the timer by going to system > Service parameters > Cisco CallManager > T302

  In CUCM Express (or the MAN), you can do the same thing by using the following commands:

  phone service

  timeouts interdigit

  Further details can be found here: http://www.internetworkingcareer.com/voice/how-to-change-the-interdigit-timeout-in-cucm-and-cme/

  I hope this helps!