Dialog box and anti-pop

Similar Questions

• Can't see anything in dialog boxes and layer/tool names are missing. Help!

  

  
  

  I noticed that after updating to Photoshop 2015. Since then, I have uninstalled re-installed via creative cloud, 2014 and 2015 but still having the same issue.

  
  

  I don't see any options in the pop up dialog boxes (new image, the image size, curves, layer options etc...). I also can't name/Rename layers and can not see the tool names. Before the update of 2015, I've been on Photoshop 2014 for a good half a year with no problems so I don't think it's a problem with my operating system or laptop. Any ideas or suggestions would be greatly appreciated!
  

  This could be. They have revamped the user interface in 2015, so if you receive just with him, I guess, but since you get it with 2014 also, it could be something the OS.

• confirm the dialog box and to redirect the page when a button is click

  Try to cancel a button would pop up a confirmation dialog box if ok redirect as 1 page (homepage)
  
  I tried to copy the code
  JavaScript:apex.confirm ("are you sure you want to cancel ', 'CANCEL'");
  
  but im having a hard time finding how to redirect the page.

  I guess you get the page shown.

  If so, then create a branch with a Condition where ask = CANCEL and go to the redirect page to. Make sure you to another branch does not exist with a lower sequence that would fire until this new branch may trigger.

  Be sure to mark answered questions if in fact they are.

  Published by: Bob37 on January 18, 2012 09:48

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• The cancellation of the 'file' dialog box and handle errors caused by the empty path that makes the DB connection

  Hi guys.

  I developed a VI that connects to the database reads the names of tables, columns of the selected table, etc. It works well as I want to.

  However, I have problem with identifying the UDL file with function of dialog 'file' use in a structure of the event that is triggered when the button 'Open' value is changed. It also works well, when I choose the UDL file, but the problem is when I cancel it and I get the error 43.

  I tried to deal with this problem with a "error handler" function to clear the error 43 but the next errors that are associated with the database conncetion appeared. The reason is, when file dialog is cancelled, an empty path passes by reference of connection and I can't start the while loop where are the key codes. I also used a box Structure connected to "Cancelled" with 'DB connection tool' in case of real and connection the reference connection for the while loop, but I get the same result.

  I want to apply for work as: start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Thanks a lot for your help in advance.

  Hi lman,.

  start to push the button "Open" and select the file UDL, the loop run to establish the connections database, if not with the cancellation of the file dialog box, the application waits by pushing the button open and select the UDL file again.

  Some pseudocode, easy to implement:

  WHILE
  
    onevent(OPEN button)
      FileDialog
  
    IF file selected THEN
      open database
      do calculations
    ELSE
      do nothing
    ENDIF
  
  WEND
  

  What is your problem with the help of loops and structures of the case?

• Order of execution for explicit file dialog boxes and query the user input dialogue

  Hello

  In my VI I use 1 and 2 express file dialog boxes prompt the user for input dialogue box. Y at - it any easy way to determine an order of exuction for these express dialog boxes? Or I have to use screws to notify?

  In fact, I just need the input of fo dialogue to prompt the user to be the first.

  Thanks for the tips!

  Martin

  Like most of the functions, the flow of execution can be set by plugging the error / mistake on clusters.

• Show progress dialog box and continue a process in the background.

  Hi all

  I need ro register a user on my server, causing Web service calls and some lenthy process.

  During this process of recording in the background, I want to show the user a dialog of progress with just a Cancel button.

  Once my process is complete, the dialog box needs to disapper.

  Is this possible?

  I looked in the dialog system progress, but it seems he needs user interaction., an OK button.

  I want just a Cancel button and my registration process going on in the background.

  Help, please!

  You can use a https://developer.blackberry.com/native/reference/cascades/bb__cascades__progressindicator.html and a standard button.
  Or a SystemProgressDialog where you use only the button cancel.

• Dialog boxes and message disappear in the framework programmes

  I use Windows 7 Professional 64-bit. For some reason, the dialog boxes that I invoke only stay on top for a few seconds. They disappear then in the programs, and if I have several programs open, I end up having minimize allow them to access the dialog box. This must be controlled by a few settings, but I can't find and the help of files were not useful.

  Any help is appreciated.

  Ken

  Hey, splashing,

  I think that if I were you, the first thing I would try is remove my graphics driver and install the latest version of the manufacturer.  Especially since it has the behavior you describe here.
  However, until you do this, just check to ensure that you do not have a second monitor enabled - perhaps dialog box shows off the screen.  Right-click on your desktop, choose the resolution, then make sure that there is no set additional monitors.

• Empty dialog boxes and missing text in tools

  Acrobat 10.1.8 - Adobe Creative Suite Standard

  Has several dialog boxes have become empty and fill the entire screen, for example the box that appears when a scan is complete.  In addition, when the tools are displayed (and the buttons on the toolbar for the tools are not there anymore) the icons but not the text.

  I guess it's either a police problem - maybe some fonts used by Acrobat have been deleted - or I have to download the prgoramme and reinstal it.  But I can't find a download site for Acrobat 10.  There is no problem with the other Creative Suite programs.

  What should do?

  Make sure that you have the complete Segoe UI font family. These aren't the Adobe fonts, but essential Windows fonts.

• Help open the levels dialog box and save the entered settings.

  Hey,.

  I'm trying to work out how to save the applied middle, whitepoint ect to a variable after the levels dialog box was called from javascript?

  I am writing a script that allows you to adjust the levels on a single image, and then I have to repeatedly apply these settings on a batch of images specified.

  Is this possible? I figured out how to open and apply the levels but not to save the entered settings.

  Any help would be appreciated!

  I use photoshop cs6 on a mac.

  Thank you

  Mark

  Sorry Paul, but I think that you're wrong. The 'adjustment' list should have descriptions for each channel that has been set by the user. These descriptors must have the key for the channel as a referencetype, b/w in a list entry points, exit points black and white as a list and as a double gamma. I think that if these aren't in the descriptor, it is because the user has not changed the default values.

  But what if all you want to do is reapply the same settings later that you don't really need to know what setting were. You simply store the descriptor that contains for later use.

  function newLevels() {
  var desc2 = new ActionDescriptor();
  var ref1 = new ActionReference();
  ref1.putClass( charIDToTypeID('AdjL') );
  desc2.putReference( charIDToTypeID('null'), ref1 );
  var desc3 = new ActionDescriptor();
  var desc4 = new ActionDescriptor();
  desc4.putEnumerated( stringIDToTypeID('presetKind'), stringIDToTypeID('presetKindType'), stringIDToTypeID('presetKindDefault') );
  desc3.putObject( charIDToTypeID('Type'), charIDToTypeID('Lvls'), desc4 );
  desc2.putObject( charIDToTypeID('Usng'), charIDToTypeID('AdjL'), desc3 );
  return executeAction( charIDToTypeID('Mk  '), desc2, DialogModes.ALL );
  };
  // store the descriptor holding the users values for later
  var newLevelsDesc = newLevels();
  // do something else like open another image
  // then when needed make a new adjustment layer using those settings
  executeAction( charIDToTypeID('Mk  '), newLevelsDesc, DialogModes.NO );
  

• Action needed to open save dialog box and STOP it. Help!

  So, here is the background information, in which case it is useful to know why I'm looking for this option - I'm in pulling photos off the coast of an internal database of the company. I can't access these pictures as normal files - I have to go to our Web site, enter an employee number and do a right-click, copy. Therefore, all options related to the editing commands, if they even help otherwise, come out for that first step

  In the meantime, I created an action that opens a new doc and resizes the photo in the pasta. Assigned as the shortcut F5. Then, to save my dexterity (: P) I also reassigned the shortcut 'open save for web and devices' to f6.

  However, it is such a massive project, and coming from a lack of time, what I really want to take the measures which I have created even more cutting of this second stage (open save w / f6).

  I googled and I'm apparently not phrasing the question right, no matter how hard I try.

  HOW in the world, if possible, add a step to my action which simply OPENS the save for web and devices dialog box? I know how to open and save, but not anymore. I need to open and everything STOPS here, so that I can simply hit enter and enter the desired file name.

  Is this possible? I will love you forever if you can tell me what and how to do it! BTW, I'm on Photoshop CS4.

  For your F6 save action files, save it to a file saving (it's okay what or where at the moment)

  Now in the actions palette, click on the box to the right where your backup is action. A dialog box appears saying "this will toggle the State of all the dialogues in this action...". "Click ok beacause we want to cede control of the backup user. Now, when you run your backup action dialogue will appear and you can save the file where and as you want.

  I hope this helps.

• My PDF does not save when I click SAVE AS opens a blank dialog box and it does not record.

  Anyone else has this problem and knows how to fix?

  Hi simonak10820071,

  Try this: -.

  The default "Save as" dialog Acrobat DC is different from the dialogue box you had in earlier versions of Acrobat, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• Get the 'error' dialog box and the 'sign in' box whenever I have send/receive. Mail is undefined to where I should have to open a session.

  Windows Mail box 'task' representing errors and the windows logon box appears.  Mail is not configured so that I have to enter a login and password.  These boxes appear whenever I select the send/receive.  This just started happening 2 days ago.  Laptop stops each day, and tried to restart.

  Hi KaciFe

  
  I suggest you use the troubleshooting steps described in the article to send/receive errors. Check id steps help you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

   

  I hope this helps.

• my safari no longer works and anti-pop filter appears permanently

  Bodyguard windows Microsoft popping up saying safari is not working properly... How can I stop.

  Hello Gail,

  I would recommend that you seek here a solution to your problem of Safari:
  http://www.Apple.com/support/Safari/

• pop-up dialog boxes

  How to prevent Properties dialog boxes and navigator popping up when I use the tools of Photoshop shapes?

  What version of photoshop are you using?

  In the most recent version of CP 2014.2.2, you can uncheck display on the creation of form from the menu drop-down of the properties panel.

  You must first draw on a form of live (i.e. the Rectangle tool) before you can see this option.