Dialog "Browse files" have not the computer node

Similar Questions

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• How do I script in DIAdem to include specific lines of code (similar to .ini in LabVIEW files) based on the computer/user?

  I took Basic training courses so DIAdem Advanced and have been scripting for several months.  I am interested in how to include specific lines of code based on the computer.  Told me it would be similar to .ini in LabVIEW files, although I've never used myself .ini files.

  Hi Karen,.

  What do you mean by "includes the lines of code?  Do you mean what happens when you run a command 'ScriptInclude()' or 'ScriptCmdAdd()' in a tiara VBScript?  Or do you mean that you want to run several lines as DIAdem begins, similar to 'ScriptStart() '?

  What do you mean by "computer-based?  Do you mean you want to implement different batch files on different computers, but you are still using the same file (named) command on each target computer?  Or do you mean that you want to implement the same command on all target computers file, but you want different commands to run this file based on the computer on which you are.  In the latter case, how do you determine computer on which you are on - MAC address, logged in user name, or what?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

  So I recently found my game Age of Mythology. The disc is very good and works, but I have not the case with the number of products to this topic. What should I do?

  Hi GuyT6,

  ·         What version of the operating system is installed on the computer?

  I suggest you contact the customer assistance form help and more information.

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• WAG160N Upgrade file is not the correct type or version of this device.

  I currently have Firmware Version firmware version: V1.00.09 on WAG160N. I tried to upgrade the firware of ussing.12 the following "WAG160Nv1-EU-ANNEXA-ETSI-1.00.12-code,0.zip" file I get the following error:

  Upgrade file is not the correct type or version of this device.

  Update failed.

  Please select the correct file and try again.

  I forgot that I had extracted the first .zip file. Who and the upgrade worked.

• Whenever I download something that I can't find the files anywhere in the computer

  Whenever I download something that I can't find the files anywhere in the computer. Even from microsoft or any web site, when I hit record it starts the download and when it finishes it is not found even in the search box. Meyer, I'm doing it wrong not now run IE8 on vista

  See if that helps,

  Go to the location of your library,

  In the upper left you should see organize, click, and then click folder and search options

  Go to the display tab section and scroll down to view the folders, files, and disks and select this check box, click on apply and save.

  See if you can find them now,

  Between win 7 and some security suites, this should reveal

  Check your download or section of the appropriate library.

• System Restore indicates an unspecified error has provisioned & you files have not been changed?

  When I try to use the system restore, I get this error as follows... (an unspecified error has provisioned & you files have not changed) I get this same error even using different activation & restore points. I don't know how you can even get an UNSPECIFIED error, seems to me if a mistake has provisioned & he knows it's a mistake he would know what is the error. In my opinion, this error message no sense at all... I'd be happy to hear this error message explained or all thoughts. Thanks for any help...

  Kind regards

  Dale

  Hello

  happy to help

  Norton is the main problem

  Thanks for the reply

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• LNK extensions: all my files have become the .lnk extensions

  All of my files have become the .lnk extensions

  This means that you have tried inadvertently open a shortcut with a program, rather than an existing file.  To solve the problem:

  1 - Copy the following command: %systemroot%\system32\rstrui.exe

  2 - Click the Start button, paste into the command (or type it) in the bottom search box and press ENTER.

  3 - follow the instructions to restore your computer to a date prior to the issue occurring.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• I have Acrobat Pro XI and have not the redaction tools available.  I looked under Protection, but they are not there. I'm on version 11.0.12. where can we find them?

  I have Acrobat Pro XI and have not the redaction tools available.  I looked under Protection, but they are not there. I'm on version 11.0.12. where can we find them?

  Are you sure have the Pro version and not the Standard version?

• My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

  I hope this will help:

  Error 213:19 | Problem is the license for this product

• Multitrack session: how have session reference copies of BACKUP files and not the originals?

  Hello.

  Back to the Audition 1.5, I mainly to save a session as and have it save copies of all files in the same folder as the file .its. Since getting CC of the hearing, I found the option to save files through the session export multitrack and saved the project successfully with its project files... However, I find that hearing CC is still reference the original files when I open the session rather file referencing the backup files in the folder.

  So my question is... How do I get Audition to reference CC and make use of the backup files, rather than the originals? My reason for doing this, it is simply because I have a large archive of SFX files and do not want the changes recorded in the original accidentally files. I want basically, each session to be autonomous and no risk of harming the integrity of the original files, I reuse SFX for different projects all the time.

  If I was not clear enough, please ask and I will try to explain my problem.

  Thank you.

  masarudaimon wrote:

  However, I find that hearing CC is still reference the original files when I open the session rather file referencing the backup files in the folder.

  So my question is... How do I get Audition to reference CC and make use of the backup files, rather than the originals?

  I studied this earlier today, for a different reason, and Yes, it is a bit strange - although explicable. The thing about 'Export', is normally the session expected to be open on the same computer, where it was then used. That will happen, is that the session would open on another machine, and all tracks marked as 'offline' should be linked to the hand to the copy of the file in the folder.

  Personally I don't think it's particularly useful either. The problem is that if you make a copy of the files, you also make a copy of the session file and is not really what you want here, is it? You want a modified version that does not require all the relinking etc.

  Unfortunately, I think it's 'as expected '. But, I'll put a request for the behavior to be changed, so that the .sesx export file reference saved copies, as it is much more logical to me as well as you, I think!

• Filling of the browser / files do not appear in the import!

  Hello community,

  I'm putting the images full screen as backgrounds.

  To do this, I try to use the browser fill feature.

  The problem is that when the import window appears after clicking on "add a file".

  (I found the RIGHT folder and I made sure it contains all the files that I need)

  the files show at all.

  To explain a bit more:

  I have in the file 'A' 10 Jpegs all named in numerical order from 1 to 10.

  The files are certainly in the right folder.

  But once the import window appears Muse doesn't show that for example the image 1 to 6 and from 7 to 10 images appear just!

  I tried to change the type of file, replacing the name of digital mailbox etc. But nothing worked!

  I rebooted my system several times and also cleared my cache RAM etc etc.

  Help, please. It's the scary limit!

  See you soon,.

  Mike

  Hi Heibu,

  Thank you for your quick response.

  I think I didn't express myself quite clearly.

  My goal was not not to use several images as a fill for browser.

  I was just stating that I have several images I want to use as fill for browser for SEVERAL pages. =)

  Whatever it is!

  I found a solution, which is a rather odd solution and of course a bug:

  I view the images in the import to grid window, which gave rise to some of the images does not.

  BUT changing the display in list view SHOWED once again the missing images! Weird right?

  So, I guess it's MAC OS X problem or a MUSE CC. I'm not sure.

  Thanks again for the reply!

  See you soon,.

  Mike

• I have a problem with my printer does not print not the computer it's a software problem, a problem in device driver or a service pack problem

  I'm having a problem with my printer. he do not print on the computer. He told me that it is connected. Is this a problem with windos vista or is it a problem that I need to upgrade to service pack 2 and how do I know which service pack I have.

  Hello

  ·        What is the model and brand of the printer?

  ·        What happens when you try to print?

  ·        The printer worked fine before?

  You can run the fix in the here is given a link and try the solutions too.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.