Dictation commands disappear & dictated stops working

Similar Questions

• Command ' / remotelogout ' has stopped working

  Hello

  The command "/ remotelogout" has stopped working after the upgrade the Skype to the latest version (7.1.0.105).

  Karel

  Download the new version 7.2:

  http://www.Skype.com/en/download-Skype/Skype-for-Windows/downloading/

  The / commands are server side controls and should not be affected by the version of the client (download in any case).

• Keep getting 'command line' has stopped working

  When I try to turn on windows Defender - will work a few minutes then I get the error message the command line has stoped working and leaves the program - it won't turn after I restarted my computer - but maintains it of the thing happens - I have to run a malware scan - but just Defender will not stay

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Use this program:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• On several programs, I get "command line has stopped working".

  I have windows vista, it is currently installed correctly updated - but malware, language programs stop working after I was online - what is the problem and how do I fix

  Hello

  Method 1:

  It seems that some background programs is in conflict with other programs. You can configure your computer in a clean boot state in order to identify what is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2:

  Also, like what happens when you're online it could be both a virus problems, you can run a scan for viruses online for your computer and check if that helps.

  http://www.Microsoft.com/security/products/MSE.aspx

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

  I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

  Hello

  1 did you change on your computer before this problem?

  2. when exactly you receive error message?

  You can follow the methods and see if it helps.

  Method 1
  Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
  (a) click Start .
  (b) in the search box type command prompt.
  (c) right-click and select run as administrator of .
  (d) type ping 127.0.0.1 and ENTRY.
  If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

  Method 2
  Check to see if the problem exists in safe mode with network.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Alternatively, you can try to reset TCP/IP and then check if it helps:

  
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 4:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• CTRL + H and CTRL + B have stopped working for Firefox. All other commands CTRL works. What is the problem and how to fix it?

  Whenever I want to open my history (CTRL + H) or Favorites (CTRL + B), I use these commands. They have always worked. Yesterday, they mysteriously stopped working. All other commands CTRL + KEY still works perfectly.

  I did not anything out of the ordinary in the last few days, and I tried to restart my computer. What could be the cause of this?

  Thank you.

  Wow - I restarted it in safe mode, opened again normally and CTRL + H and CTRL + B running again.

  I don't know why, but it worked. Thank you.

• continue to open with 'WINRSCMDE' window has stopped working. will not disappear after you restart twice.

  This window allows to appear with the message "winrscmde has stopped working and was closed" thereon and disappeared with restart twice. My microsoft windows is not working properly now. There was a message that was missing a DLL. How to solve this problem? Thank you.

  Hello

  1. have you made changes on the computer recently?

  2. when exactly you get the error message?

  I would suggest trying the following methods and check if it helps.

  Method 1: Put the computer in a clean boot state, then check if that helps you.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method2: Chell event logs and post back details
  See: What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.

• U350 webcam stopped working, Device Manager disappear.

  Hi all

  I'm hoping to get some help here. I have seen that other people had similar problems, but no satisfactory solution that applied. So go again us.

  I bought a U350 with Windows 7 home basic 32-bit.

  He came with a Bison/Lenovo Webcam which worked fine when I bought it. I usually use the camera with Skype.

  Yesterday, when using Skype, I noticed that the camera was gone, dissappeared.

  It does not show when I hit FN + ESC. I have reinstalled Power Manager, always the same question.

  It shows nothing in Device Manager. Imaging devices have disappeared.

  When I tried to add a new device imaging and added manually and stressed the downloaded driver, the driver installation begins. Then suddenly it stops with a warning saying: "no device in the setup.ini file is on this computer.

  I can't uninstall anything, because I don't see anything in the Device Manager. I can't install any drivers as the material seems to be undetectable.

  My wild guess is that the Webcam has stopped working or is disconnected from the motherboard. But maybe you have clues othere what this could be? Not detected by Device Manager means that the material is broken?

  Thank you very much!

  AJ

  If you script site and it has not detected any camera, possible problem of cable, connector or camera.

  I suggest you call lenovo support line and ship your laptop.

  Edit: because you need technical support, I've marked this issue as resolved.

• Microsoft Windows Spooler SubSystem App stopped working and was closed, rises whenever I starts and sometimes my printer driver or the printer disappear!

  Whenever I start my computer when desktop comes up, I get this msg from Microsoft Windows: Spooler subsystem App stopped working and was closed. Most of the time I can still print but occasionally (when I need to print) my printer is missing, and the driver is not installed it is said. I got my printer mfg reinstall constantly for the last 2 weeks because of this problem! Peut anyonehelp!

  Try this:

  http://support.Microsoft.com/GP/printing_problems

• Games folder has stopped working all of a sudden

  Hello...

  My folder of the game has stopped working for some reason any. I mean, it was working perfectly and suddenly, all my games disappeared.

  Problems:

  1. cannot drag ANY game in the folder to create even the simplest links;

  2. no game seems to go in the Games folder of all after installing it. Only Fallout 3, but that too after it write manually using the command prompt. Will not work with other coz' I don't really know for others;

  3. even after manual registry entires, only some will appear and that too, just an icon without any kind of information. The icon is too very bad quality. Most of these managers to game such that VGEE won't even pick up one of these games;

  4. it seems to be two registry entries. Is this normal? PIC is here:

  http://img715.imageshack.us/img715/7509/capturebf.PNG

  The files, btw, will be visible only if I add games in the top folder.

  -----

  I have already tried to disable and reactivate the control panel Games folder, have tried to create a new registry entries, tried to delete a user and create a new, tried to use software like VGEE, tried to remove the registry entries and start fresh, tried the thing 'show all files' and other things that I remember.

  What should do? How to create links in the folder?

  And please don't say pc format, coz I have over 60 games, averaged around 6 GB, larger be up to 14 GB, which I'll have to download it again and loads of other software too, some have no CD or digital download copy or such. Received more than 1 TB of files, it would be really a copy/paste of pain.

  Is the folder of games btw: http://img32.imageshack.us/img32/6810/capturecl.PNG

  Hi Devil12911,

  Restore the system to the date it was working fine. Link below will help you to complete the restore of the system:http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Microsoft Volume Shadow Copy service has stopped working"

  I hope that I have the right forum for my question.

  I get the message pop up following several times a day: 'Microsoft Volume Shadow Copy service stopped working.

  It gives me the opportunity to find a solution online and when I click on this option, the message disappears and nothing happens.

  If anyone knows how I can solve this problem, I would be grateful of your.

  Thank you.

  Bob

  Hello

  Sometimes a reboot will fix this. You can also try a system restore to a point before it started happening
  If possible. And it could be damaged.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  ----------------------------------------
  Also that to help clear corruption:

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Check its default settings and dependencies here:
  http://www.blackviper.com/WinVista/services/Volume_Shadow_Copy.htm

  Phantom memory also holds your restore VSSadmin points it defines parameters.

  Control Panel - Backup & restoration Centre

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  Rob - bicycle - Mark Twain said it is good.

• Time executable stopped working

  Last week, I started getting a message error at startup which said 'time executable stopped working. In the forum, I noticed that others had the same problem. Using msconfig and by disabling some startup (by the process of elimination) items, I've isolated the problem to a file called DLCGCATS. Although I stopped now that file to load (and the creation of the error window), I want to fix it or remove it completely. How can I do? The manufacturer is listed as 'Unknown' and the command for the file is "rundll32 C:\windows\system32\spool\DRIVERS\W32X86\3\DLCGtime.dll, _RunDLLEntry@16. Your help to help me repair or remove this program would be greatly appreciated.

  The solution is:

  1. start-> run > MSCONFIG-> startup.

  2. find the DLCGCATS file and uncheck (disable).

  3 re-boot.

  4 problem disappears at startup

  Please note this file belongs to Dell and I believe that they have granted a new driver that will also solve the problem. Be sure to update all of your drivers if you are using a Dell PC.

• RV042 stopped working

  Hello

  I have the following problem:

  My rv042 stopped working after about two weeks.  The configuration looks like this:

  Belkin Wireless Pre - N in bridge to port 1 mode

  -RV042 1 computer connected to port 2

  -Cable modem Internet

  -DSL Modem in bridge of dmz mode

  * The router works with the embedded firmware, it's never been flashed.

  Everything worked very well for about two weeks and then suddenly stopped working.  I used the system in time.  Things just disappeared.  I tried the following:

  * manually Computer Configuration to an IP address on the network instead of DHCP

  -No connectivity. Failed to contact the router at all.  Cannot ping it.

  * Power/disconnect router and wait 1 hour before feeding this back.

  -No connectivity.  Failed to contact the router at all.  Cannot ping it.

  Perform a reset of the modem

  -No connectivity.

  * Perform the reset of the modem. Reconfigure the computer.

  -No connectivity.

  * I tried with several computers.

  * I can connect the computer directly to a cable modem and internet access.  Cable/internet is so direct.

  * When computers are not assigned an IP address in DHCP mode.  Running "ipconfig / renew" cmd prompt fails with timeout.

  * When configured manually, I cannot ping the router on 192.168.1.1

  * No warning on the router light.  All the lights seem to be good.  When it is connected to the Lan 1 and Lan 2 lights flash constantly to any interval of 1 second.

  Can anyone think of anything to try with this?

  Thank you.  I managed to solve this problem by taking the following steps (found on another post here):

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  (11) reload saved config.

  (12) connect 1 modem at the same time and make sure they connect to the routers statuspage.

  (13) connect one computer at a time until all are connected.

  I never found a cause of this accident.  I turned more connection on the router in the hope I can find a cause if it happens again.  I hope this answer will help others.

• Gadget weather has stopped working

  my weather gadget has stopped working recently. Now when I try to restart it quickly shows the time and then it disappears and it says "service not available" all of the gadgets seem to work well.

  Hello

  It could be a temporary problem on the weather site that it accesses.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =======================================

  No other particular didn't help but this is the best weather gadget I've seen and another free time
  I like even better the program.

  Gadget proWeather - free - best one I've seen by far
  http://Gallery.live.com/liveItemDetail.aspx?Li=b14d68bb-71ee-40CD-8CF5-c95b63503d00&BT=1&PL=1

  ProWeather on the list 10 here - see figure D
  http://blogs.TechRepublic.com.com/10things/?p=446

  and:

  WeatherPulse - free (this can add a Desklet on your desktop even better than a gadget and more info)
  A Tip - If you install it when he asked city or ZIP in town and not the zipper.
  http://tropicdesigns.NET/weather_pulse.html

  Caution Marquee - free - a great new feature to add to Weatherpulse
  http://www.tropicdesigns.NET/products/Windows-software/alert-marquee/

  You can use both.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Explorer has stopped working error - I can't right click a folder on the desktop.

  This is my brother's computer, and they do not arrive in his account, only mine.  I have administrator rights, but it seems not to matter. This problem occurs only occasionally.  For example, I can right click on this text, copy it, then paste it.  However, if I go to the desktop and try right click on a folder to rename it, I get the error.  The error indicates that Windows Explorer has stopped working, when it says that it restarts, then the Office updates really quick. None of what I found in the forums have worked again this is why I started a new thread.  I think it might be a problem with the registry, then someone can please help me quickly find a solution?

  Note: I can not run as administrator command prompt because I can't right click, so I can't run sfc/scannow.

  We are volunteers here for the most part.

  It's a shame that we don't know anything about the distressed system but it was MS Answers owners have chosen to implement this community - do not ask basic system information when a new question is asked that make problems a lot time and frustrating.

  But now they way they choose to turn things around here.

  Maybe this will help you with your system of unspecified of brand and model with the release of unspecified Windows and Service Pack and unspecified install antivirus/antimalware:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:
  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display.
  Choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!