problems after a re-installation.

Similar Questions

• My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  It's almost certainly a driver problem.

  Please tell the service pack on your Windows® XP Pro level forum and the manufacturer and model of your system, if it is conditioned, or the make and model of your motherboard if it is not.  In addition, please tell us the manufacturer and model of the optical drive.

  First of all, if there is a system, go to the support Web site of the manufacturer for your system model.  If this is not a system, go to the support Web site of the manufacturer of the motherboard for your model of motherboard.  In the first case, you should find the drivers, chipset in particular drivers, updates and software for your system. Install all the that apply.  In the second case, you will find the drivers of integrated devices, chipset, updates and software for your motherboard drivers. Yet once, install all the that apply.  As we know nothing on the optical drive other it is attached via SATA, I can't talk about what to do there except that you should go to the manufacturer's support Web site and search for drivers and updated firmware for your model.

  It would have been helpful if you had provided more complete information on the installation of Windows, your system hardware and the optical drive.  The most complete information; more answers you will get.  Please, read:KB555375 - how to ask a question.

  Don't forget, no member of this forum is omniscient.

• I have my computer give a problem after installation CC LR accendentialy

  I have my computer give a problem after accendentialy installation LR CC while I had 6.4 LR, no CC. I could not come back, and a new installation be not admitted. The CC tool does nothing and now I have a huge problem.

  I install windows 7 now still fresh on my pc and install again LR 6.4. I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Hi rfh.

  Please let us know what exactly is the issue that you are facing after installing Lightroom CC?

  If you already have Lightroom 6.4, Lightroom CC will not be installed separately.

  The CC tool does nothing and now I have a huge problem.

  Please visit Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  I read diverend answers on the forums, my question is: should I turn you off my first LR? I can not install 6.4 and have temporary installed 5.7.

  Under the help button I would not find a deativate more. What should do?

  Lightroom does not disable the menu help . Uninstalling Lightroom should turn off.

  Kind regards

  Assani

• Windows empty creative cloud after the first installation. where is the problem?

  Hi all, I have install a creative cloud of the trial for lightroom, but after the windows installation is empty, so I can't install lightroom. where is the problem? can someone help me?

  --

  Arturo

  

  As the primary diagnosis, try to remove the file opm.db once and check.

  Launch the Task Manager, to terminate any process like the creative cloud, CoreSync Adobe related to... etc.

  Then follow the procedure below:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then go to the Local > Adobe > OOBE. OOBE folder and delete "' Opm.db ' file."

  Once you had deleted opm.db fIsland, relaunch the application Adobe Creative Cloud and check.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Problem after installation of window upates

  Original title: windows 7 problems because microsoft updates this week

  Hello

  Since the latest windows updates this week, MS computer windows 7 my husband does not work correctly.

  Most of the time there was no internet connection, although my laptop in the same room connects.

  Worse, it's his slider has the circle of rotation that continues for hours.

  I did F8, then: Startup Repair. memory diagnostic; System Restore (pre update); last good configuration...

  I'm not grumpy, so don't want something complex to do.

  Without a doubt-related updates.

  His computer crashed the first time they went, in automatically.

  When I finally received it goes and makes system restore, then downloaded the updates one by one with reboot between each of them and create a system restore point before each new updated the laptop seems to work again.

  Stop us it, but the major problem started once it was lit again in the afternoon. Really frustrating and such a waste of time.

  Any suggestions?

  Do not clean the computer and reinstall, so please do not suggest that.

  My deep gratitude.

  JM

  Hello Craig,.

  I understand the inconvenience you encountered.

  According to the description, I understand her you are facing problem after installing windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. What is the brand and model of your system?

  3. Are you an error message\ error code on your system?

  To resolve this issue, you need to determine the cause of the Windows Explorer to stop functioning, try the troubleshooting steps below to help decide the issue.

  Method 1.

  Step 1. Try to go into safe mode with network and check.

  Start the computer in safe mode and check if the problem persists. Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  To switch to safe mode see the link given below

  Try to go to safe mode with networking and check.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. Check this question in the clean boot state.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the problem persists, try Method 2.

  Method 2 System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Problems with the installation or after a simple installation of vSphere Hypervisor

  Hello

  I'm just testing vSphere hypervisor and went through the VirtualCenter installation program. I made the simple installation. I recently had a class on the hypervisor, so I thought I would give it a shot with a testlab. So far, turn not 100% great. After the simple installation on Windows Server 2012, I'll log on to the device of vCenter Server (5480) and get "this webpage is not available". It seems that I can't access anything that has to deal with vcenter server. The only thing that I know that I can access is the vSphere Web Client to manage hosts, in which he tells me to connect to vCenter server...

  I have install it on 1 virtual machine. Any suggestions? Please tell me if you need more information.

  Community of VMWare YOU thanks.

  Have you tried to access the vCenter Server by using its URL with port 9443 and the username that I mentioned in my previous answer?

  André

• A lot of problems after El Capitan then downgrade to Yosemite

  Hello, I'm on a MacBook Pro (15 inch, early 2011), refurbished

  2.2 GHz Intel Core 17

  16 GB 1600 MHz DDR3

  I have free out-f 859,48 GB 998,07 GB

  SATA drive

  (Barely) running on OS X Yosemite Version 10.10.5

  This is a refurbished MacBook Pro, I bought a little over a year he has absolutely no problem until I tried the update of El Capitan a week ago.

  First of all, the update took several hours during the night to download. He then took more than 14 hours to install. After completing the installation and reboot, the machine was apparently very well, but I had just surfed the web normally on Google Chrome.

  The next day, shortly after turning on the machine, through a much faster startup and logon process and begins again to surf the web via Chrome, everything went haywire. The MacBook froze, I had a gray screen, then he crashed and died.

  At this point, he refused to start as long as upward and rather stalled on the Apple logo screen white front. After I held down the power button to force it to turn off, wait a minute and turned off and on again, it starts only insofar as the logo screen of Apple with the progress bar and then hang. I tried to see if it would finally finish starting, no dice.

  LONG VERSION:

  I started to shoot trouble that all the typical El Capitan boot post fixed.

  1. it will not Mode safe mode by holding the shift button on the start menu to the top. I have no active FileVault. I don't remember if I have a password for the updated firmware.

  2. I was able to start it in recovery by using the command Mode + R while restarting - exactly ONCE. At that time, I used utilities and my external (passport for Mac) back to restore pre - El Capitan Yosemite. Still, things seemed good that night and I was able to use Chrome normally.

  3. the next day, the same problems started upward, however, now it is no longer will enter into Recovery Mode. Yet once again, I would be stuck on the logo screen white front, or stuck on logo screen, or sometimes it would start through and then hang on the white screen again.

  4. then, I tried to return the NVRAM on restart. This method sometimes works, sometimes not. Sometimes it again just hangs up on a part of the boot process.

  5. I booted into single user mode and went through a series of troubleshooting commands. Yet once, it worked - exactly ONCE. For a while, it will boot into single user mode, most of the time, but following the instructions of before no results will be given.

  6. I started in Restore Mode to Internet using the command + Option + r Repeat: it worked exactly ONCE. I was able to restore Yosemite 10.10.4, day 3, thought it was good, but no, crash, no initialization. None of the previous patches were working. Also, now command + R to start automatically in this mode and not in recovery mode. When the recovery of the Internet Mode ends, he hangs up on the white screen again and refuses to start.

  I am more able to access Recovery Mode to use the utilities to erase the disc.

  7. after resetting the SMC (Ctrl + Shift + option + command while holding the power button) AND the NVRAM, I am able to boot the computer and enter the Finder utilities and run the disc utilities. I ran all the permissions of the drive, I fixed all the permissions, I fixed the drive. On several occasions. Same things, I do much more than surf the web and it crashes. No startup. No Recovery Mode. Recovery mode Internet hangs up. Single User Mode is not given result. Also, I can no longer erase MacIntosh HD.

  8. I use Time Machine to restore to my last backup. No dice. Same deal, as all of the above.

  9. Finally, it does not restart after resetting the SMC and NVRAM again. I then upgraded to Yosemite 10.10.4 to 10.10.5. Now, I continue to have the same problems as above, but I can run is no longer Google Chrome or Spotify. With two apps, I get an immediate error message indicating "Chrome/Spotify has unexpectedly" until something starts at all.

  10. I removed Chrome and tried to reinstall, same problem.

  SHORT VERSION:

  1. I've updated to El Capitan and the other day my MacBook Pro started to break and turn off, and then refuses to restart.

  2. I have followed all directions on Apple's Support forums including attempt to boot mode without failure (fail). I could enter in Recovery Mode and restore an earlier version back up only ONCE. Now, it will restart is no longer into Recovery Mode.

  3. I followed the instructions to start in single user Mode. It worked exactly ONCE.

  4. I ran first aid utility disk and check/repair permissions and repair the disk several times. The problems persist.

  5. I started in Internet Recovery Mode. It worked exactly ONCE, and now instead of normal Mode recover DΘmarrer to cmd + R, it goes right to the recovery of Internet Mode. Once that ends, it hangs indefinitely on the white screen, then sometimes it will go to a totally black screen indefinitely or close again.

  6. I used the reset of the MSC and the NVRAM and managed to start completely. Then I upgraded to Yosemite 10.10.5 and lost my Chrome and Spotify. The MacBook continues to crash and stop randomly. Of the SMC + NVRAM reset seems to help with the start-up, but the crash then using that anything but Safari continues and reinstall still leads Chrome an instant "Chrome has unexpectedly" error message before it even begins.

  The Mac came to me with Yosemite already installed and I have no disc to install it after a clean cloth. I am able to surf the web, and that's mostly it.

  10.10 is saved on one archive, available from a backup Time Machine or in your App store purchases, there is no legal way to get more.

  If you have disks that came with the computer as it is prior to recovery of the internet you can retrieve for that OS, but you are limited to the upgrade of the operating system in your App Store account. If you do not have this option is strictly 10.11.6

• problem after sp2

  Dear Sir.
  After that the installation of SP2 on new tecra M2 745, when I want to shutdown computer first message 'nVidia double window display' can not finish so I have to give the command to put an end to this program; How to fix this?
  Thanks in advance
  PS: reinstalled the drivers pleasantly after sp 2
  Dr. Weekx

  Hello

  You can try if you can disable the nvidia driver Dualview feature. Go to start - Control Panel - Display - Properties - Nviida

  There must be a function called Twinview or dualview.

  Turn it off, it should solve the problem.

  Tanya Bye

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• Officejet Pro L 7680 problems after update drivers from leopard to snow leopard

  Updated to Snow Leopard from Leopard on Mac Pro with 4 HD and 12 GB of RAM.

  Follow the instructions in the Web site for the upgrade to the new driver from HP.  When I click on the HP utility now I get the error message:

  "Incompatible components - some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device won't be available. Please click on HP assistance point in the toolbar to visit the online HP Support site and download the latest versions of the HP software. "Some features do not appear in the HP utility, including scan functions.

  Followed the instructions to the letter.  No mention of deleting the HP files in the library.  Would this sole the problem?  Receive information on how to get rid of the old version and install the new one driver version. Thanks, Araya

  Hi Araya,

  Please run a scrubber to remove any HP software installed on your Mac, it will remove most recent and any previous Mac software as well:

  * Please note that the following steps will delete all HP software installed.
  
  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  In order to avoid any possible problem, also to repair disk permissions before installing the software:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Then install the software for Snow Leopard. as you probably more download this file already, just check by comparing the name of the file:

  http://FTP.HP.com/pub/softlib/software11/COL30718/MP-76100-1/HP_Installer_Officejet_Full_Group08_10.3.dmg

  After completing the installation, restart the mac and install the latest driver by clicking the Apple icon, then software updated.

  Please let me know of any problems,

  Shlomi

• Strange devices satellite U300-15 after the new installation of 64 bit Vista

  I just got my Toshiba Satellite U300-159 (model No. PSU30E-07901NN5)

  It was a display model used in the store where I bought, so I wanted to do a clean install.
  Using the recovery cd did not work. (Something about some files than couln can't be read).
  It is a really bothers me not at all because I want to run it with a clean Vista anyway, so I jumped into a Vista Home Premium 64-Bit UK + SP1 and installed it.

  After that the installation was done, I ran windows update to get a little more drivers for the few items that not have installed correctly.

  After that almost everything worked very well.

  Except:
  I had two entries in the called Device Manager device Base System. They are found under 'other devices '.
  I have looked around the site of toshiba for the drivers, but can't find anything that seemed as if it was the thing that I was missing.
  (Actually I'm not sure I've found the correct support page. I learned to http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and was able to select 3 versions of U300. U300 - ST3091, ST3092-U300, U300-ST3094)

  Everything on the PC works well: card reader, bluetooth, graphics card, wireless + LAN cable, keyboard shortcuts, sounds etc.
  The only thing that is not working is when I put it in mode "Eve". The screen goes black, the powerled stays on and the fans continue to operate. It is not possible to bring him back again if.

  Does anyone have an idea where to find these drivers?
  Or maybe just sort the problem of sleep difficulty?

  I reinstalled using the recovery CD and choose another language and thus skip the defective cd.
  But the sleep problem was still there.

  An update of the bios, mentioned in this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=32002&tstart=15 solved the problem.

  I have always an idea that both devices are well...

• After new OS installation can not see all the devices connected on satellite

  I recently reformatted the computer because I had a lot of problems, after doing so I tried to connect to the internet, on that I just plugged the ethernet cable, the light on the modem was flashing and I opened the network connections, but the network device was not there. e.g. connection to the LAN 1, etc.

  I also have another problem. I opened the Device Manager and could not see any of the connected devices.
  can anyone help?

  HI Kamal,

  If you have reinstalled just your system from the recovery CD then you will also need to re - install one of your devices (including your Internet connections) installation CD that came with them.

  The recovery CD contain only the Windows base operating system, as well as the software provided to Toshiba and to my knowledge, this does not include the ISP software or connections.

  Kind regards