Dictionary find definitions

Hello

Since the installation of Sierra, I experienced some problems with the Dictionary application. I'll try to explain this in the least difficult way possible. So whenever I try to do a quick search of dictionary-based on Spotlight, Spotlight gives me no results for dictionaries monolingual English. This means that if I have the New Oxford American Dictionary and its corresponding Thesaurus, Spotlight do not think everything about these dictionaries and keep will show the results of dictionaries, I disabled it, which in this case is the bilingual Italian-English Dictionary. Now, as much as I appreciate see entries from the dictionary being translated in my own native language (Italian), I would also like to see the entries in the monolingual dictionary on Spotlight, I strongly need for my work. In short, I'm looking for something similar in view of that context when menu shows you yellow - highlight a Word while, for example, surf Safari. I have no problem with context menus because they show all the dictionaries that are enabled in the dictionary application preferences window. To summarize, it looks like that Spotlight does not recognize these two American dictionaries (I also tried with a Dutch-English Dictionary) and continues to find definitions for the bilingual. This phenomenon happens to you too much on the Sierra? I would also add that, as a countermeasure, I did the following: deleted the file com.apple.Spotlight.plist in the folder of user library, re-indexed Spotlight, tried on a new account user without result, disabled the definitions in Spotlight, moved preferences box and down the dictionaries selected in the pane preferably small in the dictionary.

I appreciate your comments,

Francesco

The question I did experience is otherwise.

I depend a lot on the context dictionary and see that it is missing, once upgraded to 10.12 is a bit annoying, not because I can not find how to fix it (because I think I have), but I'd need to know where to do this. Whenever I write a strange word, I try to make sure I use it properly. However, when I 'Look Up' a Word, I get a wikipedia article on a group of rock or something unrelated, like the component dictionary was gone by default.

Only by reading this thread I was able to launch the dictionary application - which immediately began to download a copy of the New Oxford American Dictionary. I guess my next task is to find an easier to apply dictionary (Canadian) and understand how to install it.

Tags: Mac OS & System Software

A note on the use of spherical Mercator (epsg:3785) with 11 g

Import of the data dictionary trigger definitions
Hi I just installed Oracle SQL datamodeler and try to import the schema definition. It import all the elements (tables, views, stored procedures, functions and so) except trigger
Please notify

Best regards
Virgil
Hi, Virgil,.

Triggers associated with Tables or views must be imported. If you expand the node of the Table or view in the part of the physical model of the browser tree relevant, you should find the triggers there.

System triggers are not currently imported.

Note that there is a forum specifically for the SQL Developer Data Modeler: SQL Developer Data Modeler

Kind regards
David

data dictionary - find unused tables
I want to clean all the slop tables I created in development but not with anywhere. What is the query for a list of all the tables that are associated with each application?
Hi user,

There is no link between applications and dashboards.

Tables belong to a schema (user db), schemas can be assigned to apex workspaces. Within a workspace, you can have several applications.

If you want to list all the tables that belong to a schema it just go to the workshop of SQL and enter this statement
```
SELECT * FROM USER_TABLES;
```
brgds,
Peter

Blog: http://www.oracle-and-apex.com

Medical dictionary for pages

Hi I'm using pages at the University and I have to use a lot of words, but pages techniques emphasize them even if they're right. I have a macbook pro, so if I press my trackpad macbook show me the dictionary with definitions of the word I chose, if I am looking for a technical Word dictionary says that it is and he said to me the correct definition, so I don't understand why pages point out even if it's in the dictionary and there are already! I do not know how to choose the dictionary Italian oxford for pages instead of Apple dictionary.

Sorry for my terrible English, I hope you understand my problem.

Thanks to advice

Use OpenOffice or LibreOffice [free] with https://forum.openoffice.org/en/forum/viewtopic.php?t=30812

Peter

Japanese English Dictionary on Mac OS x and iOS poster

For some words, on Mac OS x and iOS dictionary displays definitions and foreign words (Korean?).

For example, if I type "Cleo", I get this:

I don't have any installed non-English Dictionary.

Can someone explain this?

MacBook Pro OS 10.11.3

iPhone 6 more iOS 9.2.1

InternetCloud wrote:

I don't have any installed non-English Dictionary.

Have you actually gone to Dictionary.app > Preferences and ensures that only checked boxes are English dictionaries, even after all the way to the bottom of the scrolling list?

How do we find the path of the page?
Hi friends,

I have a page like XXSamplePG.xml OFA

to use this page can find us page path and records of project and work space.

Thank you
Muthu
Hello

Muthu says:
I have a page like XXSamplePG.xml OFA

to use this page can find us page path and records of project and work space.

-You can find the path of the page, AM, Co any click on AbouThisPage link left side bottom of the page.

OR

-Try open the page.xml in explore, you can find definitions of Am and co.

Concerning
Meher Irk

HP 10 more 2201 compressed: HP 10 more Questions

I'm considering buying a Tablet Android 2201 HP 10 more. I know it's far from being the largest ever made tablet, but I can buy a refurbished for $100 unit delivered online, so it is, at this price, not a bad deal.

I have two very basic... but really important... questions before I buy, and don't you know, I could not find DEFINITIVE answers to one online! It amazes me how vague and contradictory, information I could find. Even the own characteristics of HP and descriptions do not permanently. I suppose that if I spent a few days in search high and low, I'm able to find the answers after all. But, maybe someone here can provide the answers simple and direct, that I'm looking!

1. the Tablet offers a HDMI video output (via its micro-USB connector)? I have read many responses... including half say 'yes' and the other half who say "no!"

2. the operating system Android Kit Kat can be improved? I heard that the (4.4.2) version is one of the worst and buggiest version Android to date, so the upgrade could probably really improve the performance of the tablet.

Any help (even a simple 'yes' or 'No' to one or both questions above, would be GREATLY appreciated.) BTW, the answers simply direct me to the specifications of manufacturers will not help because, as I said, they are NOT final!

I hope that someone who actually has one of them and it connects to a TV HDMI will be able to answer, or let me know if the 'casting' video (via Chromecast) is a satisfactory alternative method to feed the video and audio to an HDMI TV. I want to watch downloaded movies (files MP4 or AVI using the VLC Android software), and it would be the main use for the Tablet!

Thans in advance to anyone who can help!

Hello and welcome to the HP support community!

1. I have a HP 10 Plus, model 2201. It has a dedicated micro-HDMI output port. It does not use the USB port for the video.

I'm happy to use it with a ChromeCast (or a fire stick Amazon), and many prefer to control the diet of my couch that physically attach the tablet on television.

2 HP did not provide a way to evolve past 4.4.2. The operating system works well for me, don't know what questions you read everything!

It has worked very well on a recent trip to Hawaii. I used it to download all my images of drone of Kaua'i. A took a micro SD card out of the GoPro and inserted in 10 more, then uploaded via wifi.

HTH,

WyreNut

HP EliteDesk 800 DM G1: Setup dual monitor HP EliteDesk G1 DM 800

Type a basic question, but I can't find definitive answers so I have but I would ask here.

I'm setting up a people that I'm working with two monitors for the HP EliteDesk 800 DM of G1, which she works.

I provided a VGA/VGA splitter. I used to connect the two monitors on the port VGA HP VGA split.

Both monitors show the office but in the control panel display, it detects that a monitor. The views are just duplcated. I have tried everything I can think of getting detect it to work, but it will not just see the second monitor.

I've updated the driver without change.

My questions are:

I'm assuming that the problem was that I used a vga/VGA splitter.

Should what cable I use to set up two monitors for this PC?

Thank you!

Hello

VGA Splitter splits just the actual display, you'll be just able to reproduce with a dispatcher.

You can not extend.s

You can use the display cable and cable vga for two monitors

Update CPU for compaq dc5750

I seeks to upgrade one Promodc5750s/A64-38/80hnw/10R4k us for a dual core, but can not find definitive information if it is a socket AM2 or maybe a rare 939 mobo. I guess it's AM2, but do not want to burn cash on a part that does not.

The p/n is RT740UT #ABA

Y at - there no marking on the mobo? Know the part number?

Thank you in advance to anyone who might be kind enough to offer advice.

Best,

Roscopico

The mother card processors are socket AM2. The series of socket 939 AMD Athlon 64 X 2 only went up to 4800 +.

You can tell by using the part number HP CPU as keyword when you search Google or Bing.

Here is an example of the card mother mother found on eBay. The specifications also specify socket AM2.

Here is the guide Service and maintenance with a list of all compatible CPUs from AMD.

Unresolved external symbol _EnterAsyncCallback@4 referenced in function _viEventHandler@16

Hello

Plug-in visa.lib in my code c ++. The problem is that when I compile I have these errors that appear:

Visa.lib (visglu32.obj): error LNK2019: symbol _InStandaloneExecutable@0 referenced in function ___RunStateChangeCallback outstanding external

Visa.lib (visglu32.obj): error LNK2019: symbol _ExitAsyncCallback@4 referenced in function _viEventHandler@16 outstanding external

Visa.lib (visglu32.obj): error LNK2019: symbol _EnterAsyncCallback@4 referenced in function _viEventHandler@16 outstanding external

I know that the error "Error LNK2019" indicates that the linker could not find definition pour the external symbol. -What is to that I other add file?

Someone ' one will know where does it come from?

Thanks in advance for your answer.

Hello

Try to manually add visa32.lib in the list of the dependencies of the linker:

http://StackOverflow.com/questions/23527788/error-LNK2019-when-compiling

Kind regards

Pavilion s3505f: AHCI on Pavilion s3505f

Hello

I just replaced the hard drive on my s3505f of Pavilion with an SSD and wanted to activate the AHCI on the computer. I wasn't able to find a reference on the SATA mode in the BIOS of the PC (Phoenix - AwardBIOS r. 5.23). Have not been able to find definitive information on the SATA ports to the motherboard Irvine for the PC, but I suspect they are SATA 1 (1.5 Gb/s) instead of SATA 2 (3 Gb/s with the AHCI support). Transfer rates by an average of 110 MB/s in non-AHCI mode.

I am aware that the AHCI drivers must be enabled in Vista before a change of SATA to AHCI mode in the BIOS.

No confirmation on the types of port SATA card mother Irvine would be greatly appreciated.

Thank you!

You are the very welcome.

Yes, AHCI is a subset of RAID in some respect, but not to an SSD work better on a model as old as yours.

The only time where RAID is as good as that AHCI is if you have a PC with an Intel Series 7 or more recent chipset, which has SSD trim support RAID if you can't change the settings from AHCI storage controller, and you have installed the Intel Rapid Storage Technology technology for this chipset driver.

The only thing RAID will do to your PC would be to allow for native command queuing, which is ideal for a mechanical hard drive, but a litle on an SSD, since there are no moving parts in SSD.

Here's the only native made command queues...

http://en.Wikipedia.org/wiki/Native_Command_Queuing

Motherboards are made to HP requirements by the MFR of motherboard.

If there is no setting in the BIOS to change the setting of the drive controller, then I doubt that it will be possible to do - even with a BIOS update.

No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available

I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.

When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.

I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.

I am running Win 7 Ultimate 64

I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).

Any help would be appreciated.
Thank you
Alex

ETA *.

DCOM Server process Launcher started, automatic
Plug-and-Play started, automatic
Multimedia class Scheduler started, automatic
Remote procedure call (RPC) started, automatic
Windows Audio Endpoint Builder not started, automatic (error message 1722)

Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
I typed in NT AUTHORITY\LocalService and left the empty password.
now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.

Edit # 3
I turned on the power and everything started working as usual.
except that I still have the problem of keyboard.
Thank you

I guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management. For some reason, the audio services cannot start if power management is disabled.

I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled. I disabled the service and rebooted the system and noticed that the audio services is not started. You try to start their hand gave the errors you mentioned. When I started the service of power management, I was able to start audio services.

Microsoft does not mark as services that depend on it, but there is a relationship. I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use. Because power management does not work, it is unavailable and terminate the audio services. Again, this is just a guess, and I can't find definitive answers to this topic.

error message0x800004005

Receive from time to time but cannot find definition or what it relates to. help

Hi Patrick,

Thanks for posting in the Microsoft community.

Error 0 x 800004005 is usually associated with extraction of the .zip file. It would be useful to better understand the issue if I may know a few things.

a. When you get this error? When starting or randomly appear when you work on the computer?

is b. there a software of extraction/compression of file installed on your computer?

c. don't you make changes to the computer before the show?

To resolve this problem, I suggest that you perform a clean boot and check if a non-Microsoft service is causing a conflict for the problem to occur. Check out the link and follow the steps.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: Once the diagnosis is made, follow step 7 of the article so that the computer can be configured to start in Normal startup.

Let us know if it helped to solve the problem.

How some users can run the same batch

Hello

FSCM9 and tools 8.49 on Windows,

How can we do that user1, user2, and user3 be able to run a web interface bath Peoplsoft?

Should we create series for each control? We must give them special guarantees or role?

Thank you.

See PeopleBooks:

Define process definitions

Definition of the definition process Options

To access the Options of process definition page, select selectPeopleTools, and then selectProcess Scheduler, then selectProcesses, then selectand click on the Options tab of the process definition.

Image: Definition of process Options Page

This example illustrates the fields and controls on the Options of process definition page. You can find definitions for fields and controls later on this page.

Security process

Go to the Security section of process.

Component

Attaching the process to the components. Adding a component to a process definition of the causes that address the definition to appear on the page application for process Planner when you select file, run in this component, if you have security to run the process.

Process group

Make the process definition a member of the group. A process definition can belong to several groups of processes.

Select an existing group, or add a new group by entering a single process group name. To add new lines, click the Add button.

Process groups are then assigned to profiles of security administrator Security in PeopleSoft, which allows you to specify process queries the user classes can perform.

See PeopleBooks:

Setting permissions

Setting permissions of process

Access to the whitelists - process page (select selectPeopleTools, then selectSecurity, then selectPermissions & roles, then selectPermission lists and click on the processes tab).

Just as you set permissions for pages, a user can access, you must also specify the batch (and online) process that can call users through PeopleSoft process scheduler. In general, process groups are classified by Department or task. For example, batch programs used by your payroll probably all belong to the PAYROLL process group, or a group named the same way.

When you create a process permissions list, you add the groups of appropriate process so that a user belonging to a particular role can call the appropriate batch programs to complete their commercial transactions. To do this, use the process group permissions page.

The process authorization profile page allows you to specify when a user or role can modify certain parameters of the PeopleSoft process scheduler.

Note: You grant process profile directly to the profile user and group permissions of process through whitelists.

Process group permissions

Access the page process groups (click on the permissions link on the whitelists - page process process group).

File: Page permission to process group

This example illustrates the fields and controls on the page of the authorization to process group.

This page lists the groups of processes associated with a permissions list. Process groups are collections of process definitions that you create using the PeopleSoft process scheduler.

As a general rule, you group process definitions by groups of work within your organization, and this working group usually has a particular role that is associated with. No matter how you organize process definitions, you must assign process groups to a permissions list.

Users can run only processes that belong to groups of processes assigned to their roles. For example, you can have a set of process definitions that relate to your human resources department and another set for your production service.

In other words:

Add the process to the runcontrol component, providing the user access to the runcontrol component.

Add process group processes. Add process group to the permissions list. Assign the authorization list to user.

Hope that answers your question.

	var tileLayer = new OM.layer.TileLayer)
	"a map background.
	{
	dataSource: "mvdemo."
	tileLayer: "nokia_map."
	tileServerURL:baseURL + "" / mcserver ""
	});