Different screen resolution settings

Similar Questions

• How to adjust the GUI on different screen resolution?

  Hi all

  I have an application that must be deployed on different stations with different screen resolutions. I want my application to be responsive, that it should be settled well in accordance with the resolution just like sensitive site. Is it possible to do?

  You have at least two simple ways to accomplish what you want: setting the resolution and dispatchers.

  The first automatically adjusts Panel when it is displayed on a screen with a different resolution than it was desigend on

  Dispatchersneed a little more effort: basically, they can be used to change the appearance of the window when they are moved interactively by the operator or by programming with OperateSplitter. You can decide what controls are suitable when a divider ir operated and if they are moved or resized.

  In the case of your example of the user interface, a horizontal separator could be used to resize the text box and move down buttons when the Panel is maximized.

  The choice between these alternatives is on hand: I personally do not feel good with the brutal scale operated when you use the resolution setting so I normall use dispatchers to adapt application windows to the size of the screen.

  You can see examples of the couplings in docking.prj and examples of splitter.prj located in the samples\userit folder. For an example of the first methos, the value attribute setting resolution 100, change the resolution of the screen and see what happens when you launch the program.

• Different screen resolutions - what is the best method?

  Hello

  I know that this question was asked a thousand times before, but what is the best way and the most reliable to deal with different screen resolutions?

  I read a lot of posts about it and tested on everything: unique, methods, combinations, let labview scale my objects, their scale by myself, etc. Another alternative that I found was to design the front panel to the lower screen resolution, let labview scale objects (graphics, controls tab and decorations) as window increases or decreases and lock "groups of indicators, controls and text" to prevent them from scaling and overlap. However, if I lock these "groups" that they don't move in the right place in the resizing of the window. Then, I put these 'groups' within groups and tried to compensate for the position via the property node, but it was not possible because the 'groups' within the cluster have been locked!

  After all these tests, I realized that the best way to manage different screen resolutions must have a main VI that detects the current screen resolution and load the good VI for this resolution. The problem is that I have a VI for each screen resolution (created one by one) and if I want to move the code I have to do the same task for all the screws

  Since I already have all the screws (for different screen resolutions), I could get the sizes and positions of all the objects through property nodes and create a kind of 'cluster' which, after the detection of the current screen resolution, would be to adjust all the objects. But I have several decorations in the front panel and I can not get information via the node property of them.

  THW way you can prevent the control to move when you're scaling, is to group the controls with 'something' which is placed outside the façade. In the example I give you now, you can see that I have grouped the stop button and the 'red faces' with a 'point' on the left side of the front panel.

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• I need a symbol to remain the center of the screen on my web page, regardless of the screen resolution settings.

  Im trying to create an animation with functions inside a symbol. I need the settings of keep seprate from the other parameters of other elements on the page as a 'stage' and 'background image', which are attached to height.width, longitude, latitude % symbol. It is important to keep the symbol in the center of the screen. I also need this symbol always stay in the center of the screen no matter screen resolution settings that are probable 1360 x 768 to 1920 x 1080.

  Hello

  I solved this very strange problem by repositioning the symbol on the stage before rendering, so after creating a html file tag it looks like all good (even if it looks like very strange edge). I also tested this on IE 7,8,9, Chrome on both PC and Mac, Ipad 1 and 3, the Samsung Note 2 - it looks perfect.

  But:

  -Firefox does not at all, just a white screen which means

  -On Safari on Mac the Navigation bar at the top looks weird when you try to scale browser (fonts are somehow be duplicated or if)

  -When you scroll down to product and klick either the arrow on the right, or the second circle, the following underpage must be animated - well. But when you click on the first circle to animate the first product underpage, you must always two clicks, because the first click, it is empty and by the second klick then it must be animated. It looks like the playhead is sent at the beginning of the chronology of products symbols and first beind stopped there. I don't have any sym.stop (); action on the beginning of this timeline. Any suggestions?

  Here is the link to the online version:

  http://www.Stanko-b.com/heelbopps

  And here is the zipp file:

  https://www.dropbox.com/s/dr41wme9uqnm0a9/heelbopps4.zip

• Possible for another user account different screen resolution?

  I would like to have the resolution of different screen for the account of another user on the same computer system.  I found that when I change the resolution, it applies to all accounts, so the customization doesn't really work in this sense.

  I know we can use Magnifier or enlarge the fonts or images on each screen by turning the mouse wheel while holding down the control key.  However, this is not good for someone just not good in computer but not disabled and it is extra work that the user has to do to be able to use the computer.

  You cannot change the resolution, but you can change the DPI. Go to the settings on the display page and increase or decrease the font size to the desired size. This is the workaround we use in our domain environment for users who want the largest size of the text.

  This is a per user setting.

• Alignment of thread with different screen resolutions

  I noticed that block diagram wire positions/alignments can change, sometimes significantly, by switching to screens with different resolutions.  There is a ton of information on the maintenance of the proportions on the front panel as the solution of problems, but I can't find how to mitigate the problem with the wires on the block diagram.  Does anyone know how to best handle this?

  Thank you!

  crossrulz wrote:

  I never noticed the block schema change due to screen resolutions.  I saw this kinds of problems during the change of system fonts.  For example, switching from XP to Win7 meant go to police Aero, which is a font more great than XP used to its default system font.

  That's what I noticed as well.

  The solution is to set the blockdiagram fonts in the LabVIEW.ini be specific font rather than a system font.

  Something like

  BDFont = "Tahoma" 13

• Unable to save the screen resolution settings

  I have Windows 7 Ultimate and just updated my monitor that supports 1920 x 1080 resolution.  I changed the resolution 1920 x 1080 and click on apply and OK.  When I log off and back on or restart the machine the screen resolution dates back to 1680 x 1050, which was my old monitor resolution.  My monitor is correctly identified by brand and model in the advanced settings and resolution of 1920 x 1080 is always available, Windows just won't save!

  I can make a permanent change in the registry?  It becomes annoying to have to adjust the resolution of every time!

  Thank you.

  Dan

  I FOUND THE SOLUTION (to my problem at least).  It turns out that it's Windows Live Mesh that was causing the problem.  Uninstalled Live Mesh and no longer have the problem.  Guess I don't use mesh until they solve the problem with the solution of problems.

  Dan

• Optimization of captivate file for different screen resolution

  Hello

  I have a problem to optimize the file captivate for different screens such as laptop, netbook and pc. PC and laptops, this isn't a major problem, as the size of the screen is great. But when you play the swf file captivate generated in a netbook, the entire site gets resized to fit the resolution of the screen with the exception of the captivate file. Captivate file is truncated so that the user can read only half of the slide.

  Thanks in advance

  Parvathy

  One thing you can try is to manually adjust the dimensions of the swf.  I have not found a way to do in first grade.  We had a similar with a few eLearning problem, that we have built all our testers used very well.  But once someone undocked their laptop and turned their desktop monitor, had the same problem you describe, where the background of the film was cut.

  Once you publish the files, open the file .htm with Notepad or your editor of choice text/html.

  Look for a line that looks like this:

  var so = new SWFObject (strURLFile + strURLParams, "seduce", "1100", "798", "10", "#CCCCCC");

  or

  var so = new SWFObject ("filename.swf", "Captivate", "1600", "1200", "10", "#CCCCCC");

  Change these numbers quotes at 100%, like this:

  var so = new SWFObject ("filename.swf", "Captivate", "100%", "100%", "10", "#CCCCCC");

  Save the .htm

  My experience was it will adjust the swf to fit the height or the width of the screen, depending on which is more short.  In other words, it either will fill the top down OR sideways, but keep the swf in proportion.

  hope that helps.

• Make the size of the police according to different screen resolutions

  Hi all

  I'm developing an application that needs to run on the two devices OS 6 and 7. There are a number of devices that fall into that category, I need to standardize the sizes of police across all screen resolutions.

  A few messages in the support forum, I understand that I need to use UNITS_pt as the police unit in order to standardize the size of police across all resolutions.

  But my client gave me sizes of fonts to use in pixels. Should have sizes from photoshop. What I need now, is to convert the font size of the pixels into points. I created a method that you can find below, for this conversion, but I don't know if it will work or not. I need an expert advisor.

  public static Font getFontPlain(int fontSizeInPixels) {
          try {
              fontFamily = FontFamily.forName("Helvetica");
          } catch (ClassNotFoundException e) {
              Logger.blackBerryErrorLog("Error creating font", e);
          }
          int size = Ui.convertSize(fontSizeInPixels, Ui.UNITS_px, Ui.UNITS_pt);
          Font font = fontFamily.getFont(Font.PLAIN, size, Ui.UNITS_pt);
          return font;
      }
  

  Any help on this will be appreciated.

  Thank you much in advance.

  "Should have sizes from photoshop".

  Unfortunately, it's a potential problem.  I've been in this situation before, and the size of the pixel depends on the size of the image that the designer uses to work up the screenshots.

  I had a designer who has very well used 72 dpi in the development of its screenshots and therefore the size of the pixel corresponding points, a point is 1/72nd of an inch.  This could be the case here.  What device has been the designer develops for and what size have been specified for the various policies?

• Resizing of components | IMG | SWF for different screen resolutions

  It is a question of several party and could be the best answer by directing them to some good tutorials/documentation on the topics, but I will use a specific instance.  Go here: site for this example.  The three areas that I edit are (the building, pole and neon sign) logo, photo stamps, and trailer animation (history).  If you change the screen resolution to 800 x 600 to 1280 x 1024, you will see the provision corresponds to the right of the screen at least in my opinion, with the exception of these three areas mentioned above.  So what I mean, is there a way to 'scaleContent' synonym = "true" for mx:Image (s) inside panels for custom components, img (by themselves), SWFs, etc.?  For example how can I do custom component neon adapt better when it is displayed on a screen of 1280 x 1024.  Here's the code.

  Index.MXML

  <?xml version="1.0" encoding="utf-8"?>
  <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"    
      creationComplete="init()"
      xmlns:comp="components.*"
      layout="absolute"
      verticalScrollPolicy="off"
      horizontalScrollPolicy="off"
       backgroundColor="#464d57">
   
   <mx:Script>
    <![CDATA[
     import mx.rpc.events.*;
     import mx.collections.*;
     
     import mx.resources.*;
     
     [Bindable]
     public var pic:ArrayCollection;
     
     private function init():void{
      picDataIn.send();
     }
     
     private function picHandler(event:ResultEvent):void{
      pic = event.result.pics.image;
      trace(pic);
     }
    ]]>
   </mx:Script>
   
   <mx:constraintColumns>
    <mx:ConstraintColumn id="col1" width="25%"/>
    <mx:ConstraintColumn id="col2" width="25%"/>
    <mx:ConstraintColumn id="col3" width="25%"/>
    <mx:ConstraintColumn id="col4" width="25%"/>
   </mx:constraintColumns>
      
   <mx:constraintRows>
    <mx:ConstraintRow id="row1" height="25%"/>
    <mx:ConstraintRow id="row2" height="50%"/>
    <mx:ConstraintRow id="row3" height="25%"/>
    
    </mx:constraintRows>
   
   <mx:HTTPService id="picDataIn"
       url="assets/data/books.xml"
       result="picHandler(event)"/>
   
   <mx:Image source="assets/view/Interface.png"
      top="row2:0"
      scaleContent="true"/>
   
   <comp:Neon  autoLayout="true" />
   
   <mx:LinkBar dataProvider="bookPages"    
      fontSize="24"
      horizontalGap="50"
      bottom="row1:-5"
      right="col4:0"
      disabledColor= "0xaf2d2d"/>
   
   <mx:ViewStack id="bookPages"
       top="row2:0" bottom="row3:0"
       left="col1:0" right="col4:0"
       resizeToContent="true">
    
    <comp:Home id="home"
       label="Home"/>      
    
    <comp:Pics id="pics"
       label="Pics"     
       width="100%" height="100%"
       picData="{pic}"/>
    
    <comp:History id="history"
        label="History"/>
        
    <comp:Contact id="contact"
        label="Contact"
        width="100%" height="100%"/>
        
   </mx:ViewStack>
  </mx:Application>
  
  

  
  model: neon (Neon.mxml)

  <? XML version = "1.0" encoding = "utf-8"? >
  "< mx:Canvas xmlns:mx ="http://www.adobe.com/2006/mxml">".
  < mx:SWFLoader id = "Loader".
  source="@embed(source='assets/view/Neon2.SWF')" / > "
  < / mx:Canvas >

  The neon.fla dimensions are 800 x 150, which goes hand in hand with my uncertainties.  Is there a preferred method for setting up of your images?  Would be implementation of several SWF files to load in the meantime on the user's screen resolution is the best way, and all the issues between the two?  Thank you very much for your time, understand that it is not easy to answer questions.

  SWFLoader has a scaleContent property.

  If a component is too big for its location, you must decide whether he should be allowed to shrink.  You can allow the narrowing by defining minWidth/minHeight.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to change screen resolution settings when intoxicated?

  Original title: everything on my screen is huge and even microsoft technical support is unable to know why please help!

  He me MISSING some parameters such as the dpi settings in my menu. I talked to a number of microsoft tech support people and they can't help me. I've set everything as the smallest. every thing that I deal with, such as window screens, menu options and icons are extremely important. If I go into internet options I can not even see the ok or Cancel buttons down, I hit enter. I did a clean install of xp to 7. I wanted to go back to xp and it won't let me even do! If can please tell me how I can make my screens fit or reinstall xp!

  Click Start, type:

  Device Manager

  Press ENTER on your keyboard

  Expand the graphics card

  What did he say?

  If a graphics device is not listed, and he only says: standard basic Microsoft or VGA display driver, then your graphics card must be updated.

• screen resolution bug

  I have a small problem, sometimes after playing games on my computer, the screen resolution must be changed so that the game will play correctly. But after shutting down my computer and turning back on (usually with a space for a day or so between the two), the screen resolution remains the same as what was the game screen, so my office now has a larger icons, background screen increase size etc. Can I change the resolution to what it is supposed to be, but is starting to become quite annoying, especially since it move my desktop icons. Is there a way to permanantly fix this?

  Just in case people always have a problem with this problem, pls here's a solution that worked for me...

  I spent the last month trying to solve this problem, and "youemailme" (another thread here) had the correct solution for me! And so Simple!

  I noticed on Blogs that this problem has existed for at least Win98 is not your computer or your operating system.

  The question seems to be programs in your Menu has a different screen resolution to set startup, thereby causing the screen resolution change when you start your computer. This isn't a MicroSoft program error, but rather a question of "settings".

  With me, what worked were 2 things:

  (1) perform the 'clean boot process' as advised by many to determine which granted software was causing the problem... and then.

  (2) right click on the name of the program (as discovered in above) 'problem' in the Start Menu > properties > compatibility.  For some reason, there is an option to "run in 640 x 480 screen resolution", which has been verified.  This program was in the startup folder and the cause of the problem.  Then unchecked the resolution box. No problem.

  In my view, there are a large number of people dealing with this exact problem. I hope that this process of step 2 could solve their problems.

  (ps, just thinking about it now, you might not even bother with the 'clean boot process' but simply go through all your programs in your Start Menu and run the 2nd step explained above. Should work?)

  See you soon

  Stephen

• Windows 7 changes the screen resolution when video applications go full screen.

  When I have plenty of screen some video players, that the resolution of the screen on just the ordinary 1080 p 1080 p (native) that has a refresh rate of 60 hz. As soon as I exit full screen it activates again. Would be nice but when it switches the screen is no longer fits the screen and the user interface looks very grainy, the video actually looks very good. Windows Media Player 12 for this, while VLC does not, which leads me to believe its something to do with the way that Windows Media Player makes video (which I think it uses Direct x, which uses VLC OpenGL).  I have this problem on my computer and my brothers computer I customized built. The specifications are very similar, other that my computer has an Nvidia GTS 250, and has a Nvidia GTX 275.  Is there anyway to stop it from doing this?

  Data sheet:

  Intel Core i7 clocked at 2.66 Ghz

  6 GB of ram

  ASUS P6T SE LGA 1366 Intel X 58 ATX Intel Motherboard

  
  

  Just in case people always have a problem with this problem, pls here's a solution that worked for me...

  I spent the last month trying to solve this problem, and "youemailme" (another thread here) had the correct solution for me! And so Simple!

  I noticed on Blogs that this problem has existed for at least Win98 is not your computer or your operating system.

  The question seems to be programs in your Menu has a different screen resolution to set startup, thereby causing the screen resolution change when you start your computer. This isn't a MicroSoft program error, but rather a question of "settings".

  With me, what worked were 2 things:

  (1) perform the 'clean boot process' as advised by many to determine which granted software was causing the problem... and then.

  (2) right click on the name of the program (as discovered in above) 'problem' in the Start Menu > properties > compatibility.  For some reason, there is an option to "run in 640 x 480 screen resolution", which has been verified.  This program was in the startup folder and the cause of the problem.  Then unchecked the resolution box. No problem.

  In my view, there are a large number of people dealing with this exact problem. I hope that this process of step 2 could solve their problems.

  (ps, just thinking about it now, you might not even bother with the 'clean boot process' but simply go through all your programs in your Start Menu and run the 2nd step explained above. Should work?)

  See you soon

  Stephen

• L520: screen resolution 1366 x 768 on Windows 7

  Hello!

  I can't set the resolution 1366 x 768 Windows 7, only 800 x 600 and 1024 x 768 are available in window screen resolution settings in the installation of Windows 7 Professional 64 bit. Should I install any additional software?

  OK, I did so, after the installation of Windows updates and restart it the correct resolution.