Possible for another user account different screen resolution?

Similar Questions

• Document is a license for another user account

  Adobe Digital Edition detects all the books on my corner, but some of them are listed with only the name of the file .epub and author unknown. When I try to open these specific ebooks, nothing happens. When I click on point errors get one of the following error messages "the Document is licensed to a different user account" or "#2038".» All of the books in question are ebooks I bought at B & N with my account. Can someone tell me know that I can solve this problem? Thank you.
  

  Purchased books from B & N can still be seen in Adobe Digital Editions (they use a slightly different DRM system that ADE has not been updated to handle yet).  To view this content at the moment, you need to use the desktop B & N software.

• Why my logon screen icon double for each user account? What should I do?

  Please help me with my problem

  Why my logon screen icon double for each user account?

  What should I do?

  Hello

  Most likely, this is caused by a 3rd party "software logon." For example, Omnipass is known to cause these 'issues '.

  Please take a look here:

  http://social.msdn.Microsoft.com/forums/en-us/WindowsSecurity/thread/22d7fc0a-595c-4b7c-B195-a19e73e06db3/

  I hope this helps.

  Best regards

  Mieke

• ACS5: method of different external authentication for each user account

  ACS4 I could specify a different external authentication for each user account. I'm trying to find a way to do the same thing to the ACS 5? When I go under identity in Access Services, I see the system requirement: username I can use to identify the user who logs in, so that I can directly to a source of different identity, but the separate political configuration for each user is very inconvinient and would require hundreds of policies, in our case.

  I was hoping that we can create a kind of attribute for each user. SysAdmin > Configuration > dictionaries > identity > internal users. I created the new attribute called 'Storage of identity' with the enumeration type, which has 4 values: internal, Entrust Token, Token RSA, counts AD and checked the box "add a political Condition." I can then go under each user and select the storage of identity for each user. But now I can't find where I can use under part of identity of an access policy. I can use it under "Group mapping" but that maps to one group and not to an identity store. I need to use it under the identity somehow, but I can't find how.

  Hello Roman,

  The attribute you created will be available when the user is authenticated through internel ID store, so that you cannot use to select the store ID.

  The best way to do this would be to use other attributes to differentiate the identity store.
  Allows you to create a sequence of identity store so that for each user, ACS will try to authenticate by using multiple identity store.

  For example, you can use these:

  Network status

  > End Station filter

  > Device filter

  > Devide filter Ports

  Here you can import filters from a file and it would therefore be more scalable.

  Hope this helps.

• How to adjust the GUI on different screen resolution?

  Hi all

  I have an application that must be deployed on different stations with different screen resolutions. I want my application to be responsive, that it should be settled well in accordance with the resolution just like sensitive site. Is it possible to do?

  You have at least two simple ways to accomplish what you want: setting the resolution and dispatchers.

  The first automatically adjusts Panel when it is displayed on a screen with a different resolution than it was desigend on

  Dispatchersneed a little more effort: basically, they can be used to change the appearance of the window when they are moved interactively by the operator or by programming with OperateSplitter. You can decide what controls are suitable when a divider ir operated and if they are moved or resized.

  In the case of your example of the user interface, a horizontal separator could be used to resize the text box and move down buttons when the Panel is maximized.

  The choice between these alternatives is on hand: I personally do not feel good with the brutal scale operated when you use the resolution setting so I normall use dispatchers to adapt application windows to the size of the screen.

  You can see examples of the couplings in docking.prj and examples of splitter.prj located in the samples\userit folder. For an example of the first methos, the value attribute setting resolution 100, change the resolution of the screen and see what happens when you launch the program.

• Different screen resolutions - what is the best method?

  Hello

  I know that this question was asked a thousand times before, but what is the best way and the most reliable to deal with different screen resolutions?

  I read a lot of posts about it and tested on everything: unique, methods, combinations, let labview scale my objects, their scale by myself, etc. Another alternative that I found was to design the front panel to the lower screen resolution, let labview scale objects (graphics, controls tab and decorations) as window increases or decreases and lock "groups of indicators, controls and text" to prevent them from scaling and overlap. However, if I lock these "groups" that they don't move in the right place in the resizing of the window. Then, I put these 'groups' within groups and tried to compensate for the position via the property node, but it was not possible because the 'groups' within the cluster have been locked!

  After all these tests, I realized that the best way to manage different screen resolutions must have a main VI that detects the current screen resolution and load the good VI for this resolution. The problem is that I have a VI for each screen resolution (created one by one) and if I want to move the code I have to do the same task for all the screws

  Since I already have all the screws (for different screen resolutions), I could get the sizes and positions of all the objects through property nodes and create a kind of 'cluster' which, after the detection of the current screen resolution, would be to adjust all the objects. But I have several decorations in the front panel and I can not get information via the node property of them.

  THW way you can prevent the control to move when you're scaling, is to group the controls with 'something' which is placed outside the façade. In the example I give you now, you can see that I have grouped the stop button and the 'red faces' with a 'point' on the left side of the front panel.

• Download firefox 10, Setup asked for the user account, enter the type of w/admin myPC, firefox exit installtion (Toshiba A665/I7/windoe 7)

  My computer is Toshiba A665 w/Intel core I7 and Windows 7 installed. When I run the installer of firefox 10, he asked for the user account ID and password. I entered the name of the computer that is mine with admin enter the account and a correct password. Installation of Firefox to quit smoking. No screen / another reply?

  Hello

  Please try a right click on the downloaded file and select run as administrator.

• Different screen resolution settings

  I did a program on a computer with the setting of screen resolution of 1440 x 900 pixels, and the cover perfectly fits the entire screen. I am now to do a build and apply the program on two computers, one with a higher resolution (no problem) and the other with the highest resolution possible in 1024 by 768 pixels. Can I use the same program, or what I need to change the front panel in the program?

  Go to file > properties VI (or Ctrl + I) and then from the category "" scroll down to the size of the window

  check the "maintain the Proportions of the window for the different screen resolution.

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• User account control screen

  I tried to install the latest version of Flash Player for the last two months. I current Installation, please wait and it is as far as it goes. I never get the user account control screen to complete the installation process. I've been through the resolution of problems and put my Internet Security options as needed and still no luck. I am running Windows XP and IE 8.

  Download the Adobe Flash Player installer directly by clicking on one of the following links.

  Flash Player ActiveX (Internet Explorer)

  Flash Player plug-in (all other browsers)

  See: "Controls change user account in Windows XP"

• Performance issuses, impossible to uninstall a program, add another user account, the computer doesn't turn off etc.

  Can anyone help, my vista home 32-bit edition computer is seriously messsed! ??

  I'm unable to download windows updates and I have like 20 of them to download, it just never performs an act he says its download, but it's not I can leave it for hours and nothing happens, this causes problems because my computer does now, because when you do it just says : configuration of updates and can last for hours, so I have to unplug the power to turn it off, which is not good for the computer.

  IM also having problems with other things such as it won't let me uninstall not more programs, I can't do a restore of the system from the control panel or add another user account. freezes Internet too much, slow start. I always get microsft popups saying: "the program has stopped working and not could find solutions to this problem" but I did a system restore in safe mode, but the dates were 3 months back and that didn't help the performance of this computer. I want to return to a closer date now, but I can't. as it doesn't let me do a restore of the system in the menu start control pannel ir.

  I run a scan with malaware had 181 made thereats that were deleted but I still have the same problems as above

  He said also my windows defender is not protected (outdated) more and needs to update, but it will not update

  Help, please

  Hi gandt85,

  1. you remember to make changes to the computer before this problem?

  2. are you able to boot into safe mode without any problem?

  Since you are not able to restore the system to normal mode, I suggest you to do a system restore to a recent date of WinRE using the full version of Windows Vista disk.

  Method 1:

  Do follow link below:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  You can also try to run a scan using Microsoft Security Essentials.

  Check out the link:

  http://www.Microsoft.com/security/products/MSE.aspx

  Also, try the malicious software removal tool and check.

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• "The document is under license to another user account.

  I use the ADE for a few months, mosty to borrow books from the library and transfer them in my corner.  All of a sudden, I can't read my books to Nook.  The message error is "the Document is under license to another user account.

  The only thing I can think is that I started with a credit card and then replaced by another.

  Does anyone have any suggestions?

  Lori

  There was a problem recently with a software update on the corner,

  requiring some form of renewal.

  Check the thread http://forums.adobe.com/thread/1107352?tstart=0 (towards the end)

• Forgotten password for XP user account and did not password reset disk, how can I get in

  Forgotten password for XP user account and did not password reset disk, how can I get in

  Michael, Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky... http://social.answers.Microsoft.com/forums/en-us/w7security/thread/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Music: How can I transfer all of the music files to another user account

  How can I transfer all of the music files to another user account

  In simple terms, simply copy it to an external drive and then copy them back as the other user.  If files are protected by DRM (Digital Rights Management) as iTunes from Apple or Napster, you will need to know your service music, if the files can be copied.

  "rstoyka" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I transfer all of the music files to another user account