Different VM 1 with 3 vmdk in the data store: Migration of data to rename store

Similar Questions

• Synchronization between two databases with only 2% of the data; Please help me

  Hi all
  
  I have two oracle databases in 2 different servers PROD and TEST instances. the two databases are in gr 10 2 in linux servers.
  
  My PROD database contains about 300 GB of data and is dedicated for production area.
  My Test database is dedicated to Spanish test for PROD database. (small server in terms of space and RAM comparing to PROD db)
  I would like to synchronize every week TEST db with PROD db with only 2% of the data and all the structures
  Could someone tell me, if you use a datapump export I can import only 2% of the amount of data and the structures ot theere is another way to do it?
  Thank you very much
  
  best regards,
  W

  I'm not really sure what you're talking about. There is no option, expdp and impdp x % of the data, is that? And if Oracle can sovle repositories inetegrity (PK, FK), it cannot be assumed which tables are lookup table (to be entirely exported) and can not assume the logical data integrity.

  Nicolas.

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Is it possible with javascript to compile the data entered by the user in an easy format to excel?

  I have a form in which the user enters several lines of data as well as additional information on these data.  I would like finally to export data, so I can manipulate the Excel.  This is possible because javascript (or otherwise)?  Here is an example of what I mean.

  The form of a table in which the user enters each of the names of his friend, their favorite color and their age.  I want the name of the specific friend linked to their favorite color and age so when I export to excel I can see how many friends has the user whose favorite color is red.

  If the form data would be as follows:

  Friend1name

  Friend2name

  Friend3name

  Friend1color

  Friend2color

  Friend3color

  Friend1age

  Friend2age

  Friend3age

  When I export the data as entered above, the results of each field in another column.

  Anyone has any ideas for that?

  It is possible with JavaScript. You can write the data to the JavaScript console and then copy & paste into Excel, or write to a file as an attachment (aka data object) and export it. Here's a sample script that writes the field data in the JavaScript console:

  Table of domain names

  Invoke the var = ['Friend1name', 'Friend2name', 'Friend3name', 'Friend1color', 'Friend2color', 'Friend3color', 'Friend1age', 'Friend2age', 'Friend3age'];

  Browse the fields and write the field values in the console

  for (var i = 0; i)< afields.length;="" i="" +="1)">

  Console.println (getField(aFields[i]).valueAsString);

  }

  Display console

  Console.Show ();

  You can place this code in the mouse event to the top of a button and click the button to run it. This last line of code displays the console and you will be able to copy & paste the data.

• With an average of the data output.

  Hello

  I am a new user of Labview. I need to write a labview program that will average my output in a single data data.

  Basically I have an XY graph which results in a table and the idea is to average the data points.

  This is the kind of program that I use.

  Thank you

  Mutah

  Hi Nicole,.

  You can index the table and use the average function (within the mathematics - probability and statistics). Then, you will get the average value of each table. If you want to see the averages in a table, then you can combine average values in a table again...

  Hope this help out you

• Help with a script for the date field

  Is this possible when the display of a date field is not also: date {EEEE, MMMM D, YYYY}

  then

  Message: "Please select a date from the calendar to the date.

  and focus on the date field

  Thank you

  I thought the event output, if you change the this.rawValue to xfa.event.change, you can try to use the calculate... event, which would mean that they get the message earlier.

  Anyway they will always be able to cut-and - paste a date if it is in the correct format.

  Bruce

• Page with page linked to the data = false

  Hello
  
  According to me, Miss me something.
  I want to create a page "entry" for a group of pages.
  This entry page can be completely empty aside from the detail for the rest buttons.
  
  SO I thought that I have to create a page name it to something and uncheck the box related to the data.
  Drag all the pages I want as details contained in this page and done.
  
  Well that does not work, when I put databound = false, he still wants a description element.
  JAG-00120 [Beheer] descriptor item is required.
  
  Which I did not since the page is not data-bound.
  
  I also tried to create a dummy VO and the page on that basis. It works, but its ugly and the poster form the model is always visible.
  
  Basically, I just want to group these pages under 1 "tab" in the menu.
  
  Any ideas?
  
  
  Version = JHS10.1.3.3.81
  
  Anton

  Anton,

  Can not you something independent dummy whist is not displayed and set this as a descriptor?

  Steven Davelaar,
  JHeadstart team.

• Windows Package Manager; Operation failed with 0 x 80073712; The component store has been corrupted

  On my laptop Windows 7 (Gateway NV53), the following error just jumped on my screen. He doesn't seem to have an impact on performance at the present time, but is nevertheless. Th

  Hi Joey,

  (1) that you get this error message when running any particular task?

  (2) was there any software or hardware changes made on the computer before this problem?

  This could be when you try to install components or updates in Windows 7 by using Windows Update. You may receive an error message. Alternatively, it could be if trying to turn Windows features on or off, that some features may appear in the Windows features dialog box.

  I suggest you to follow the steps and check if it helps;

  Method 1:

  You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/931712

  Method 2: Using Deployment Image Servicing and Management to fix Windows Update errors

  (a) open an elevated command prompt. To do this, click Start, click principally made the programs, on Accessories, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• V2V conversion with no space on the data store.

  Hi all -

  I need to resize/shrink a disc of comments (disc Win2008r2 800 GB to 300 GB) and I read that there is some reasonable success using a conversion, v2v (with vCenter Standalone Converter), but my concern is that I have only 50 GB free on the host data store.

  I would be able to download and drop the virtual machine folder and files on my local machine and convert from my local to the esxi host?  If not, what other options are there?

  Thanks in advance

  -michael ~.

  Yes, you can use the VMware Converter to convert the machine virtual VMware Workstation/Player format and save the files on your PC.

  Once this is done, then run the converter again choose VMware Workstation/Player as source and your virtual infrastructure as your destination.

  However, if the new virtual machine is over 50 GB in size, you can have a space problem.  You can, on the last page of the VMware converter during the movement of the virtual dos machine to your vSphere host, make sure that the disc is set to THIN provision...

  Good luck!

• problem downloading mobile app built with Adobe AIR at the Apple Store

  We have built our mobile application using the Adobe AIR platform not Apple XCode.  Everything went very well throughout, we were able to create all the required certificates and provisioning profiles for development and test the application on real iPhones (3GS and 4) and cross the whole iTunes Connect meta data entry process, but now, when we try to download the binary file into the Application Loader, we keep getting this error when we try to download :

  "Application has no codesign verification.  The signature was invalid, or it was not signed with a certificate of presentation of Apple. »

  Would like to understand how to solve this problem...

  Thank you very much

  Birgitte

  Kept the com.company part? It is normal not to use numbers at the beginning, but I am surprised if you ran it without using the com.company bit.

• Problem with &amp; quot; To access the data XML &amp; quot; Tutorial

  I was going through the tutorial on the XML data for access to the (well written I must add) there was a little bug inside, due to an invalid assumption, and it takes the selectedIndex property of the grid, and it assumes it is the same as that of the XML language, which is not the case. Here is the link:
  
  http://www.Adobe.com/devnet/flex/QuickStart/accessing_xml_data/
  
  I understand that this tutorial is the XML "to get to the" not necessarily communicate with DataGrid. I have the same problem and I'm not coming up with a nice way to solve this problem, when you double-click a row in a data grid, you can detect his 'id' / number/child-entry (or the unique property of this entry).
  
  I appreciate your comments.
  
  ML.

  I don't want to analyze this example. Are you asking how to get an id or some other value, when you select a row in a datagrid?

  When you select an item in the list-based control, properety selectedItem control contains a reference to the dataProvider of element for the selected item. You can get goods that are present in this object:
  var sId: String = myDataGrid.selectedItem.myIDProperty;

  If I misunderstood, Please rephrase your question.

  Tracy

• Dynamic SQL, dynamic table name with TPCV statement including the date

  Hello
  
  I just wanted to help with the following block of PL. My problem is when I try to run this block it ask to call the values for 2, even if no variable substitution replacement variables not present in the code. Please find the code below:
  
  
  Declare
  Cursor C_1 is
  Single select table_name from gsi_daily_count;
  table_names varchar2 (240);
  Begin
  C_1 open;
  Loop
  Extract the C_1 in table_names;
  WHEN THE EXIT C_1% NOTFOUND;
  
  EXECUTE IMMEDIATE "select last_extract_date,
  TO_CHAR (min (largest (nvl (last_update_date,'| 1 January 10 |'), nvl (program_update_date,'| 1 January 10 |'))),'|) HH24:MI:SS DD-MON-YY |') MI,
  TO_CHAR (max (greatest (nvl (last_update_date,'| 1 January 10 |'), nvl (program_update_date,'| 1 January 10 |'))),'|) HH24:MI:SS DD-MON-YY |') my
  of ' | table_names | »
  Last_extract_date group
  order of last_extract_date desc';
  
  End loop;
  Close C_1;
  COMMIT;
  End;
  
  Help, please.
  
  Thanks in advance.

  Try this:

  Declare
  cursor C_1 is
  select unique table_name from user_tables;
  table_names varchar2(240);
  Begin
  Open C_1;
  Loop
  Fetch C_1 into table_names;
  EXIT WHEN C_1%NOTFOUND;
  
  EXECUTE IMMEDIATE('select last_extract_date,
  to_char(min(greatest(nvl(last_update_date,''01-Jan-10''),nvl(program_update_date,''01-Jan-10''))),''DD-MON-YY HH24:MI:SS'') mi,
  to_char(max(greatest(nvl(last_update_date,''01-Jan-10''),nvl(program_update_date,''01-Jan-10''))),''DD-MON-YY HH24:MI:SS'') ma
  from ' || table_names ||'
   group by last_extract_date
  order by last_extract_date desc');
  
  End Loop;
  Close C_1;
  COMMIT;
  End; 
  

• Where with to_date returns only the data a month

  SELECT col1, col2 FROM bill WHERE
  trunc (TO_DATE(time_stamp, 'yyyy/mm/dd HH:MI:SS AM') = trunc (TO_DATE('2012/01','yyyy/mm');
  
  This only returns data for the first day of the month data and the need for a month.

  user2002208 wrote:
  Tank (14) and the sample data 20120204103342 and 20120204152550

  IMPERFECT, not professional & fully amateur 'design '!

  NEVER store DATE in the column of type CHAR, VARCHAR2 or NUMBER!

  SELECT col1, col2 FROM bill WHERE substr (time_stamp, 1, 6) = '201201';

• How to save the data of different rates in a single VI?

  Hello

  I tried to acquire 2-channel measurement of voltage at 10 kHz and analyze data, finally to save the data to both 1 kHz and 1 Hz. What I did is this loop of producer/consumer use to do the work of recording at different rates. I have queued all the data in the main loop, and then removed the data and write it to the file in other loops. I added "wait = 1 ms' a consumer loop for recording data at 1 kHz (loop of fast logging) and added" wait = 1000ms' in another loop to get the slow 1 Hz (logging loop) data record.

  My problem is that the data record works fine in the case of 1 Hz, but it does not work for the case of 1 kHz. Although the time-out period defined as 1ms, the interval between two samples in the loop of fast data recording is about 100ms.  Subsequently, 1ms, 10ms, 100ms, 150ms tried in this loop to see what intervals are in these cases. I found that the intervals are same as assigned in the timeout greater than 100 ms, but if the time-out is set to 1ms or 10ms, the intervals are again around 100ms.

  My question is - why I can't reach data record 1 kHz using loop of consumers/producers, while the same way works for the case of 1 Hz?

  Thank you very much

  Hao

  You are sampling at 10 kHz and you want to back up your data "as if you sampled at 1 kHz and 1 Hz", if I understand correctly.  I also understand that you use the design of producer/consumer model to help with this (a good idea).

  I'm assuming that the producer 'product' a segment of data at a time, to say the value of a second of data or a 2 x 10000 I16 (assuming a 16-bit integer A/D) table you put into a queue and wait for the consumer.

  If you have data at 10 kHz, how do you get representations to 1 kHz or 1 Hz?  There are (at least) two possibilities - average data over the interval of proper time, or (re) sample data.  The good thing is that you can handle the situation 1 kHz and 1 Hz, essentially at the same time and in the same processing loop.  I'll discuss the case 1 kHz - with the assumptions I made, the case of 1 Hz becomes almost trivial.  I'll discuss treatment also just one channel, as it is similarly almost trivial to go from 1 to N-channel.

  If you have 1 second of data sampled at 10 kHz, and will "reduce" 1 second of data sampled at 1 kHz.  Note that you have 10 samples for each data point that you want in the end.  The "Averaging" method said "Replace all 10 points in the average of these 10 points", while "resampling" method said "replace 10 points with, say, the first point, ignoring the others.  An easy way to do this is to use the Reshape feature to transform an array of 10 x 1000 elements of your array of 10000 items 1-D 2D.  Now, you can use a loop FOR an average of 10 items or simply extract the first.  [This is where almost everyone, including me, a mistake - when you put a 10 x 1000 2D array in a loop, you get 10 iterations of 1000 items and we want 1000 iterations of 10 items.]  Oops, what to do?  [Simple - converts 2D array before sending in the loop FOR.]

  So when you have processed your 10,000 points and got both 1000 samples "1 kHz" and 1 "1 Hz" sample, you write each of them in their respective folder and wait for the next item in the queue of the consumer.  Consumer focus on the queue loop, it will automatically 'block', waiting for the producer of the 'feed' some data.  Note that the producer generates data once per second, producing 10000 points for the consumer in the process, but the time to deal with these points and perform the required disk i/o should take only a few milliseconds (certainly not more than 100, even if writing to a floppy!), so you don't have much time to do other interesting things (such as display data).

  Bob Schor

• Cancellation of the assignment and reassign the data store by using different LUNS that datastore has not appeared.

  Hi all

  I have a data store after vdisk1 I have not assigned the vdisk to data store and reread the esxserver, the data store has disappeared.

  Again, I assigned the vdisk using the same number of logical unit as before and reread the esxserver, datastore appeared again return.

  But if I use a different assignment vdisk lun and on a new analysis of data store does not appear.

  Can someone tell me if the LUN must be even to see the store of data back again.

  If so why. ?

  Is there a vmware documentation to substantiate this claim.

  concerning

  Neela

  What do you mean by vdisk1?  The data store are stored as metadata on the LUN, when is formatted VMFS.  If you remove the LUN the VMFS is sitting on, then Yes, the data store will disappear.  If you only remove the vmdk who lives on this data store, then no, the data store must remain as it is, and you should be able to move the vmdk on the data store as needed.

  -KjB

  VMware vExpert