I ran virus scan on system showing a Trojan horse in windows\system32\services.exe. How to fix without vista windows dvd?

Similar Questions

• IM using XP and it keeps running a shutdown of the system initiated by authority NT\SYSTEM w/status code 1073741482 & system process ' C:WINDOWS\system32\services.exe. How can I stop the closure?

  I get the following message: closing system, the system stops. Please save all work in progress and log off. All wukk unsaved changes are lost. This shutdown was initiated by authority NT\SYSTEM. The system process ' C: Windows\system 32\services.exe ended unexpectedly with status 1073741482 code. The system will now stop diwn and restart.

  I tried the boot, and all the days that something did not work if today I'm the switch back to the normal startup. I tried to run a scan, but it does not have the "clean boot" State... it would also not automatic updates... so here Let's go!

  I had the same problem, tried the clean boot, like Wells, and it has not fixed the problem.  Please try this:
  There are several steps to follow.
  The first is a suggestion from one of the blogs with a slight variation.

  First step:
  Enter safe mode.  (Put in the computer market, press F8 several times until the window offering the Safe Mode option appears.  Use your top and arrows to select Safe mode, and then click it.)

  Since the Office Safe Mode:
  1. right click on 'My Computer' and select 'Properties': my computer-> properties. This opens the "System Properties" dialog box

  2. Select the "Advanced" tab

  3. under "Startup and recovery", click on the button "settings".

  4. at the bottom, in the section "System failure", see what boxes are checked. Windows XP checks them all by default.

  5. click on "Automactically restart." This is probably your cause if you get automactic closures. As an alternative to optimise this method, you can, at your own discretion, also do the following:

  i. uncheck "write an event to the system log.
  II. check 'Send an administrative alert' (which should do more to view the sudden error rather than stop).
  III. uncheck "Automactically restart."
  IV. in the combo box of the section 'Write debugging information', choose '(none) '. Note that this will disable the rest under "information write Debuggin".

  6. your finished, then click 'Ok' to close the dialog of void and then 'Ok' again in the "System Properties" dialog box

  That should do it. Some upgrade suggestions are the best propally but I think these security only handle issues related to other areas if they worth downloads of 2 to 5 hours of 56 k modem for added security. However, I find that some updates are not even for my type of installation (due to unused configuration detection?) or I do not use the services.

  For more information on Tweaking, I suggest to look at "http://www.tweakxp.com" If you are a user of Windows XP.

  Good luck.

  Step 2:
  Also in safe mode.

  Some of these steps have been found on the microsoft Web site.  However, the following text is a little different and should translate into success.  It did for me.
  1) enter the Configuration of the utility system.  You can do this by done safe mode right click on Start, by choosing Search, then typing in msconfig and searching the c: drive.  Once the search is complete, click on one of the icons of msconfig.  This will bring up The System Configuration utility.
  (2) click on the tab general select Selective startup.
  (3) click to uncheck the Process SYSTEM. INI file.
  (4) click to uncheck the process to WIN. INI file.
  (5) click to disable Load Startup items.  Make sure that The Load System Services and use Original of INITIALIZATION. INI are checked.
  6) click on the Services tab.
  (7) click to select the hide all Microsoft Services check box.
  8) click disable all, and then click OK.
  (9) computer.

  Step 3: log in to Windows.

  (1) when you receive the following message is displayed, click Select, check box don't show this message or launch the system to Windows Startup Configuration utility , and then click ok.

  If this solves the problem, go to step 4.  If it is not the case, then you will need support from a professional.

  Step 4: find the culprit.

  1) enter in the System Configuration utility (SCU for future reference.)
  2) click on the Startup tab.  (NOTE: If you find "audm" within the list of starting points, it is most likely the culprit.) It was for me. If it is, go to If not, go to 3).
  (3) the top of the list in the start menu, check AN item, then restart the computer. Make a note of each element that starts without failure.
  Repeat this step until you get the window to "Shut down NT Authority... ».  This will reveal that the start point is the origin of the problem.  Once found, go to 4).
  (4) get in safe mode / SCU / Startup / untick the culprit.
  (5) restart Windows.  If this solves the problem, you are almost finished.  If this isn't the case, you will need the services of a professional.

  Step 5: remove the culprit and the reactivation of the process.
  1) go to Start / Search / and look for the item that caused the problem.  (When I did a search for audm - 2 released files.)
  (2) delete all files with the name of the offender and empty your trash.
  3) enter the Configuration of the system - (start/run/msconfig).
  (4) on the general tab, re-enable the Process SYSTEM.ini, WIN.ini processand Load Startup items.
  (5) restart the computer.   The problem should be solved.
   
  Basic suggestions:
  (1) ALWAYS keep a firewall- and choose the option "Open at Startup.  (That's how I think that was my problem - by not having is not the Firewall opens at the beginning).
  (2) perform a virus Scan is every DAY.
  (3) keep all windows programs and drivers updated - every DAY.
  (4) keep all antivirus programs and firewalls updated - every DAY.

  Good luck

  Non-XP-Prof.

• Receive the error message "the system c:\WINDOWS\system32\services.exe process terminated unexpectedly with status-1073740972 code".

  Original title: c:\WINDOWS\system32\services.exe

  I get: the system process c:\windows\system32\services.exe ended unexpectedly with the code of State-1073740972. The system shutdown will be present and reboot. It's driving me crazy! Help! PLEEEASE

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  How to configure Windows XP to start in a "clean boot" State

  Hope this information helps.

• My Antivirus Karpensky show an alarm C:windows\system32\services.exe (PID 1632) the attempt to integrate into one another plocess has been blocked

  Included, I authorize the actions or words, that I have a virus in the computer laptop mi?

  Concerning

  Hello

  ·         When you get this warning?

  Maybe it's that your system is affected by the virus. I suggest you to run a virus scan on the system to ensure that the system is not affected. Once you find any infected file, I suggest you to quarantine the file or move it to the vault.

  I suggest you to check the below link.

  Windows XP Service Pack 2 (part 5): Virus protection

  http://support.Microsoft.com/kb/889739

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Hi theremy iphone 4S starts showing the percentage of false battery - does anyone know how to fix it help me please

  HI there I'm using iphone 4S with IOS 9.2.1 beginning indicating battery wrong percentage anybudy knows how to fix this help please me

  Please explain exactly what you see. If the phone stops simply by showing a relatively high load, then it's quite possible the battery is bad and must be replaced.

• Windows 7 don't not istall because of an old program from Mcafee virus scan, the system won't allow me to remove.

  I have an old Mcafee virus program on my PC that I can't remove to allow the installation of Windows 7.
  Ideas?

  Hello

  Use the mcafee removal tool

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

• I ran OneCare scan and it showed the 0x1c600c0f error code

  What is the 0x1c600c0f error code and how can I fix this problem.

  What is the 0x1c600c0f error code and how can I fix this problem.

  Ask the experts of Onecare to the Onecare anti-virus forum:
  http://social.Microsoft.com/forums/en/onecareanti-virus/threads . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I wiped and recovered from my CD of my operating system to windows XP due to a virus, now my system XP is SP1 (version 2002) and needs to upgrade, how can I get the old updates please?

  I am operating windows XP, but it is more difficult to download anything, I can only assume its because my system recovery disk brought me originally pack 1 and missing essential items in my system which is used to enable automatic updates to work to get my system back to normal.

  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• My fonts & page size is SUPER HUGE and I wouldn't change a thing. I tried a system restore, but the pages are still MR. MAGOO size how to fix this?

  I was surfing around on eBay, when all of a sudden my screen has turned the size, he has always been to SUPER huge. And I change all the settings. I tried a system restore, and the pages on eBay are still Mr. Magoo size.
  I have no idea how or why this happened, and I just want back the sizing settings I had before.
  Help, please!

  See this:
  
  https://support.Mozilla.com/en-us/KB/page+zoom

• After the crash of the system, Workstation 10 reports "not enough physical memory is available" - how to fix?

  On a Windows Pro 8.1 with 32 GB memory main system, I was running three virtual machines on 10 workstation.  Then we had a power failure and the system crashed.  Once the power was back and I restarted, any attempt to run a virtual machine failed with the following (change numbers) message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To solve this problem, decrease the size of this virtual machine to 988 MB memory, increase the amount of physical memory for all the virtual machines to 1219 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap.

  This occurs if the virtual computer, I try to start is one of those that was going or who was not working at the time of the accident.  In this case if I am as an administrator or not.

  I checked Edit/Preferences/memory, and reserved memory is set to 24480 MB - 24 GB.  Can I run a virtual machine if I set the memory size to below the value indicated in the message (in this case, 988 MB).  Of course, I don't want to run like that!

  The Windows System Control Panel reports (almost) complete 32 GB system memory. Task Manager indicates that only 7% of close to 32 GB is in use.  "About VMware Workstation", reports 32640 MB.

  How can I fix it?  I'm basically dead in the water.

  Bob

  You may encounter the same problem that others have reported in this other thread: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation

  Try the workaround it and see if it helps.

  --

  Darius

• Whenever I turn on my laptop, the system time is the same as when I stop it, how to fix

  Hello

  I have HP DV6 - 2130ca. I recently had a bug that were not work my quick commands. A support forum, I got to know that if I take my batteries for laptops and power and press the power for 30 seconds he'll fix it. Well, he got the problem solved but since then I am having a problem.

  Whenever I turn on my laptop, time is the same as when I stopped him. For example, if I 'Shut Down' or 'Sleep' at 2: 00 and turn it on, to 17:00, the time would still be 14:00 on laptop.  I tried Googling and found a lot of answers slightly different questions on several support forums by using the Task Scheduler to schedule a task to update time only every 5 min etc, but that did not work.

  If I update manually time using time settings Internet, set time until I turned off my laptop or put it to sleep.

  Please help me. Thanks in advance :)

  Hello
  Thanks for your reply.
  The box is already checked and checking windows files took about 15-20 minutes to complete but "Resource Protection Windows not found any breach of integrity"

  Another way to solve my problem? BTW, I tried to search google for solutions, do something else planned and edited another, but not luck...

  Thanks in advance

  Hello

  Have a look here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-to-fix-incorrect-file-timedate/1823408f-B0AC-4CAF-a5f4-81242f0d4f74

  Step 3 and 4 could be an easy first try!

  Try the answer here! See if that helps!

  This article may also be useful

  http://www.thewindowsclub.com/Windows-time-service-not-working-synchronization-fails-error

• get a smaller duplicate of my page of firefox every time I open a new window and I have to close, nothing works and even ran a virus scan - to f

  Geez, you have to go to 10 different things even get here! I'm having a problem with getting a small version of firefox every time I open a new window but it is empty, it looks like your web page, I have to close it, to look at my site that I opened. I did a virus scan and there is nothing. I have windows and firefox is my homepage, btw when I go to IE I don't have this problem, seems like when firefox installs a new version of that something is happening.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• I have win XP SP3, I ran a virus scan and I still can't open anything in the title of the standard account now the admin account does not work no more not even in safe mode what can I do?

  How can I fix the operating system of the issue I'm having with my computer I did a virus scan and now I can't even do anything under the admin account I could do before the scan I can't even do anything in safe mode the standard user account was seen maleware pop ups before I did the scan the admin account had no problem before the scan is carried out I used Mcafee and it did not work it seems to have done worse and windows defender was no use which can make?

  Hello

  • You receive an error message?
  • What exactly are you not able to access?
  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time to ensure that you have included all the information required and we will try to help. »
  Refer to this link for more information on: How to ask a question
   
  In the meantime, you can try a full system scan just to be sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.