Difficult to install a program, I get a setup.exe not one application 32 valid win pop up when I try to install a serif

Similar Questions

• I get a "not an application valid win 32 error" when I try to download and run a program

  Original title: win 32 error

  When I dounload one program and try to run it I get one is not a valid win32 application error. This happens on more than 1 program how to fix this?

  Hello

  ·         What program are you trying to install?

  ·         The program is compatible with Windows XP?

  ·         Since when are you facing this problem?

  ·         What web browser do you use to download a file?

  I suggest to delete temporary internet files from your computer, and then try to download the program, save it in a different location and try to install it from there.

   

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  The file is corrupted, bad or missing.
  (a) if the hard drive is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  (b) If you are running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  
  (a) If you try to run a program that is not designed for your version of Windows, you can get this error.

  (b) Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  (c) if the program is an MS-DOS program more former start program or Windows, you can get this error.

  (d) if the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.

  
  (a) this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.

  one) If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or drivers that are not compatible with Windows.

  (b) download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Follow these steps and check if that helps:

  Step 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"

• Get the message: "Please download Adobe Reader DC for Mac or Windows" when I try to open a fillable pdf on my ipad.

  Get the message: "Please download Adobe Reader DC for Mac or Windows" when I try to open a fillable pdf on my ipad. But when I'm looking for the DC version in the app store there is no one, please help?

  Hi fabler80957302

  Please confirm if you get the error message below

  If so, it is a special type of PDF form with Adobe LiveCycle Designer. And mobile applications of Acrobat Reader do not support these forms.

  I suggest for you please download the PDF document on your Windows or Mac desktop and open the same with the Acrobat reader DC desktop version.

  Also please let us know if this is a different issue than that.

  Kind regards

  Supriya

• activate my membership and paid for it as well, but the creative cloud app shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been

  I activated my subscription and paid for it as well, but the creative application cloud shows only the trial versions of the programs? What does that mean? Cause I followed the installation steps, and when I try again it says my installation code has already been activated?...

  Kindly Contact customer and details of payment verified. [Make sure that you are connected to the Web site with the valid Adobe ID under which the product is licensed].

  
  

  
  

• Get serious error pop up when you try to uninstall a program...

  I need help here. I did something really stupid recently and I see it now. I installed a program on my laptop without even checking if it is compatible with windows vista. It installed fine, but now when I try to uninstall it, I get a message that says "Image transfer can not be installed in the current version of windows".  So now I don't know how to get this program off my laptop. The error message says that it can not be installed, but it is already installed, so I'm confused about what to do next...? If anyone can help me I would really appreciate it!

  Hello

  You didn't say what was the program?

  1. make a Restore Point.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. use Revo Uninstaller to remove the program

  Revo Uninstaller - Free Version
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  3. If necessary to re - install the program (no matter if it is running), then use Revo to remove it.

  4. make sure to reboot after its withdrawal.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Getting the error "of your browser cookies disabled. Please activate. "When you try to connect to an account G-Mail and iGoogle

  I get the following message when you try to sign has G-mail: "the cookies of your browser feature is disabled. Please activate. "It's the only hit program and all the solutions proposed to date have failed. 'the cookies feature' seems to work fine for all other applications jut not count G-mail and iGoogle. Any help? Thank you.

  Hello

  1. what browser do you use?

  2 did you change on your computer before the show?

  Follow the items listed below and later a update on the State of the question.

  The functionality of the browser cookies is disabled

  http://support.Google.com/accounts/bin/answer.py?hl=en&answer=61416

  'The cookies of your browser... feature. »

  http://support.Google.com/mail/bin/answer.py?hl=en&answer=9525

  Hope this helps!

• l get one "this application cannot run on your pc" when I try to download flash player for my new Surface running windows RT

  I get an error "this application can run on your pc" message when I try to download flash player for my new Surface running Windows RT.

  If you have downloaded Flash player from the Adobe Web site, you will have the version that is compatible with the x 86 / x 64(Win 7, Win8 Pro etc) which does not work on your Windows RT Surface. This is because Windows RT running on ARM processors, and programs written for x 86 / x 64 cannot run on RT.

• most programs now get error message "could not start from this location after a mail there is session 2 nite".

  After a session 2 nites E-mail there, many programs said message error "could not start program from this location. In addition, long delays after you clicked on a link, a large display hourglass for up to several minutes. Have tried to rebuild, but I think that the problem is still there. Any suggestions?

  What is a "mail session?

  What is, "have tried to rebuild?"

  Edition with Service Pack of Windows XP _ _?

  What anti-virus application that you use, and if she slept in day?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Why do I get "error 1325." Microsoft "is not a valid short file name" when I try to install the 1.41 Borderlands update? "

  I am running Vista Home Premium SP2.  I bought the game Borderlands of the year edition DVD (or CD, I can't remember which).  To get the downloadable content, the instructions direct users to a website that says that you should update to 1.41.  After downloading the update of this website (several times) and try to install (including using the suggestions on support.microsoft.com/kb/2438651), I always get "error 1325." Microsoft "is not a valid short file name"

  Hi Mike l. Mpl Vly

  I suggest you to refer to the following article in the Microsoft Knowledge Base and check if it works.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I hope this helps!

• I get "Error 1720 - there is a problem with this Windows Installer package" when I try to install Verizon MIFI on my desktop

  Original title: Error 1720 - CustomForInUsePortersNo_UI_Upgrade...

  I am trying to install a Verizon MIFI on my desktop and am getting error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact... Following that is a CheckForInUsePortsNO_UI_Upgrade. and then a string of digits, letters and notes. I came here looking for the answer and what I found I have to access the internet from the desktop computer requiring the difficulty to obtain the fix. I need help including the patch and how to obtain the fix my laptop on my desk. Thank you very much for your advice. Robert

  Hi Robert,.
   
  I suggest that you do the following and check to see if they help.
   
  Step 1:
   
  Temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If this does not work, try installing Windows Installer 4.5 from the link below and check if you are able to install Verizon MIFI.
   
  Windows Installer 4.5 is available
  http://support.Microsoft.com/default.aspx/KB/942288
   
  Step 3:
   
  Make the SFC scan on your machine to repair or recover system files.
   
  Step 4:
   
  Create a new user account and try to install Verizon MIFI.
   
  If none of the steps to help, please contact Verizon support .
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I get "Could not access network %APPDATA%\microsoft\windows\sendto location" when I try to install iTunes

  I am trying to install the latest version of iTunes (10.2). I tried the whole registry thing, and that did not help at all. I had removed the previous version as well but that didn't do anything either.

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Trying to install CC error Creative set-up of cloud has stopped working. A problem caused the blocking of the program works correctly. Please close the program. I downloaded setup.exe and tried the site and my computer can't see what is wrong.

  I rebooted, shut everything off and ran as administrator and it stops at the same place every time.

  Uninstall anything cc which can be installed.

  clean a (http://www.adobe.com/support/contact/cscleanertool.html)

  then install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

• Matshita UJD360 burner will read CDs but get the error message indicating that Windows Media Player has to close when I try to burn

  HELLO, I HAVE A CD/DVD EXTERNAL BURNER, IT READS THE CD AND IT RECOGNIZES THE VIRGIN CD, BUT WHEN I PRESS ON THE "START BURN" BUTTON, I GET A MESSAGE SAYING THAT WINDOWS MEDIA PLAYER SHOULD BE CLOSED, HE DOES IT ALL THE TIME

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you are facing some problem with Windows media player.

  He would be grateful if you can answer this question in order to help you further.

  1. which version of the Windows operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  3 is the issue limited only when burning to disc?

  I suggest you to consult the following Microsoft article if you are using the Windows XP operating system.

  Windows Media Player has encountered a problem and needs to close: http://support.microsoft.com/kb/555494

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• "Microsoft Visual C++ Runtime Library. Runtime error! Program: C:\windows\surfmonkey\smproxy.exe. This application has requested the execution in an unusual way. __Please contact the support team of the applications for more information. »

  Currently, I can't go online or perform any additional task without this message that appears in the middle of the screen.  Any suggestions...

  Hi KWEN,.

  1. who is the edition of Windows that is installed on the computer?

  We see you also posted your question in the Forums of XP

  As you are able to start the computer in safe mode, we recommend that you check if anyone other than Microsoft is causing this issue.
  If you're running Vista, then proceed as follows:
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that another non-Microsoft program is causing the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  If you are running Windows XP, check out this article: http://support.microsoft.com/kb/310353
  Note: Don't forget to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.