Difficulties in getting the IPAD to find the printer HP Envy 100

Similar Questions

• I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.

  Change outlook web mail
  

  I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.  Not sure how they get along with the different email address.  I tried setting up separate accounts and profiles in outlook 2003 and have also tried to separate identities and accounts in outlook express 6.  Any help would be appreciated. TKS Joe Novick

  I can't speak for Outlook, even if it is very similar, but if you have configured the real separate identity in OE, as in needing to switch identities with it, avoid a problem unless you use both the same e-mail address.

  If you use different addresses to your identity, go to tools | Accounts and remove its identity. Vice versa in its identity.

  I use Cox and were three addresses in the three identities without problem.

• How can I get the printer without printer name handle?

  I want to block printing by hanging. so I hang startdoc.

  Unfortunately, if I block the specific printer, I should get the printer handle

  I know how to get the handle to the name of the printer printer. but I don't know the name of the printer
  I knew the name of the only hdc and document printer.

  I tried for 3 days. but I can't find about it :(

  If anyone knows, please answer...

  [Moved from the community centre of Participation]

  Your question is more technical that is usually asked/answered here.

  You're more likely to get help in the TechNet forums

  https://social.technet.Microsoft.com/forums/IE/en-us/home?Forum=ieitprocurrentver

  or

  MSDN https://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment

  Don

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• Want 5530: Get the printer code application for instant ink HP

  Sorry its me again, I found the bit that says that I need to print a Web Services information sheet to getrequest to printer code. My question is now is that the only way to get a claim code?

  Hi Sonicoffee,

  You need get the ink cartridges before the printer can be set up.

  New printers should come with cartridges.  You can go back to where you bought your printer or buy cartridges online.

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/Ink--toner---paper?JumpID=ps_guex52di7t&aoid=109893&002=2217546&004=2038518613&005=17988090&006=64500481213&007=search&008=&025=c&026=

  Good luck getting the printer all together to the top!

  Jean

• print module cannot get the printer device context

  I can't get my printer to work. It seems that the computer does not recognize the printer when I plug. No printer symbol. then, when I try to print a square stands up and says 'printing module cannot get printer device context' I have no idea what this means or what to do about this please help

  You need to get the print vendor drivers.   You can try using a printer driver that converts data of the PDL even that interprets your device, but you should request this information from the company that made the device

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• How to install (gdiplus.dll) to get the printer to work?

  HP Presario cq62 notebook, HP deskjet 3845, windows7, error message reads as follows: gdiplus.dll is missing. How to install this to get the printer to work?

  Hi RDT49,

  Gdiplus.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the error in gdiplus.dll is a key piece of information that will be useful while solving the problem.

  Cause of Gdiplus.dll errors

  Gdiplus.dll errors are caused by situations that lead to the removal or corruption of the gdiplus.dll file

  In some cases, gdiplus.dll errors could indicate a problem, a virus or malware Registry problem or even a hardware failure.

  I recommend you contact the manufacture of your computer to help solve the missing DLL file problem.

• where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC

  where can I get the printer driver for canon lbp2900 printer.  I'm running Windows 7 on a HP Pavilion PC.  Windows Update does not list a driver for LBP2900 printr

  A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?

  I have not tried, I don't have the printer.

  Its usually best to ask the manufacturer of the device for its pilots in the first instance.

• LaserJet m1212nf network - how to get the printer in a network?

  I have a LaserJet Pro M1212nf, who does not have wireless capability.  I'm on a desktop PC, Windows 7 and am connected with a USB cable from the computer to the printer. There is no other Windows 7 computers on this network, so so far I didn't have need of this feature.

  I spent an hour trying to figure out how to be able to print from my iPad with Airprint, that comes with this printer.

  The printer is shared, which I thought was enough, but apparently not. I found the instructions on the use of a printer wireless, which is not the case, and using an ethernet connection, which I am not, but nothing about the direct USB connection. I found instructions on changing a USB connection to an ethernet connection - this is what I have to do? I hope someone can help with this.

  Should I switch from USB to ethernet to be seen on the computer network and iPad? There must be a way to do this, but I am confused.

  Thank you.

  You should be able to install the printer with the normal software via an Ethernet connection to your router.

  To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

  First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  find and install SOFTWARE to FEATURE FULL if it is available:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3965849

  Install and let me know the result!

  Have a great day!

  -Spencer

  PS this software should include the installation via the USB port option and then convert to USB wireless > Wireless Setup Wizard.

• Can not get the printer to print with the new windows 8

  I recently rec'd a new computer with the new windows program (8). Printer works sometimes, but not all the time. The setting was listed as offline. I can't understand how to get online. I have sharing enabled. I entered the paraphrase wireless often - sometimes it prints a doc and no mmore. Other times it does not print anything. Can anyone help.

  Hi MargieSchellinger.

  I'm glad to know that you've posted queries in Microsoft communities.

  From your description, I can understand that you can not print in Windows 8.

  I understand that it must be frustrating, but don't worry, we are here to help fix your problem and guide you in the right direction.

  Could you please answer this question so that I can guide you in the right direction.

  -What is the number of brands and models of printer?

  I want you to try the following method and check.

  Method 1: If the printer is offline, then try the following steps to connect to the network.

  With the right button of the new queue in printers and faxes tool and clear the printer offline use setting. This resets the registry key to the correct value.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution.

  Method 2: Please follow the links and instructions mentioned in the link to fix the problem with the printer.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  Method 3: Follow the link which provides instructions on how to install a printer.

  http://windows.microsoft.com/en-US/windows-8/install-a-printer.

  Method 4: To connect printers please follow the link and the instructions mentioned in the link.

  http://windows.microsoft.com/en-US/windows-8/add-device-or-pc-to-network.

  Hope the above information helps.

  Do get back to us and let us know the State of the question in the case where you need further help or your next post.

• Can not get the printer to work under Windows

  I have a Brother Laser printer and a Canon ip8500 printer.  I tried to get one to run Windows XP Professional.  This week I installed the Hello printer software and it finds my printers but then I get this message "sharing is not supported for this type of printer.  When I click on settings in VMware, disabled the said printer icon.  If I close Windows and click on settings in VMware, the icon of the printer is enabled.  I'd appreciate it if someone could help me get one of my printers to work.  I must do something wrong and just can not understand.  I use VMware version 2 and Snow Leopard on my iMac.  Thank you.

  onemulligan wrote:

  I use Fusion 2.0 (116369) and a version of snow leopard 10.6.2 iMac.

  Fusion 2.0 (116369) is not compatible with Snow Leopard and you should spend at least VMware Fusion 2.0.6 (free upgrade) or VMware Fusion 3.0.1 (paid upgrade).

• OfficeJet Pro 8600 Plus: can not get the printer to function after installing new wireless router

  I recently changed routers from D-Link to a Netgear R6400.  I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more.  When I try to change the IP address, which is what I think I do, the screen indicates "this feature has been locked by your system administrator or the one who put up the system."  I'm the only one using this printer and I put in place originally, but I do not remember 'locking' anything.  Will you please tell me how to solve this problem, so I can use the printer again.

  Hello

  Thank you for using the HP forum.

  A suggestion that we recommend is to uninstall and reinstall the software FULL of features.

  Alternatively, you can try the doctor print and Scan?

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• How can I get the printer icon to display on the toolbar

  For some reason, the printer icon disappeared from my toolbar.  How to get to show once again?

  For some reason, the printer icon disappeared from my toolbar.  How to get to show once again?

  What 'toolbar '?

  Internet Explorer toolbar?

  If Yes, open Internet Explorer > right-click on one of the icons such as House, security, etc etc, Page > click Customize > click Add or remove commands > box on the left, scroll and select printer > click Add in the Middle > printer is now on the right box > if you want to move it to a specific location, click on it and use the button move up or move down > click on close when finished.