print module cannot get the printer device context

Similar Questions

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• Failed to create the printer device context... Only the fact so far with a program

  My profile says "student", but this is a business... I use the program with the question in my daily tasks of work & desperately need a fix!

  I have a LaserJet Pro200 MFP m276nw color

  Windows 7 64 bit

  I get this message when I try to print from a program called life that is hosted online through Casimir:

  Error message: failed to create printer device context

  I contacted life & their support said it was a problem with HP... the computer was the right type, so it should work with their system.

  I have a HP Deskjet 1300 on this computer before moving to this new one.  Not sure if an old file is in conflict, but I don't know how to solve this problem, if that's the problem.  The 1300 print without any problems.

  I just uninstalled all HP applications on my computer & start from scratch... He gave me the same error again.

  I wanted to add, I checked the firewall... not to block. I also reduced... the name of the printer has not set the it.

  Also, when I uninstalled & reinstalled this morning, someone from the Office on a network computer had sent a work on this new printer by mistake & when I reinstalled, it printed the work! So I know that it can print the program... it's not fair.

  Jobs are actually feeling at the start of the computer first, until there's something on my computer blocking the internet application to connect to the printer?

  After hours yesterday trying to 'fix' my firewall settings & create rules network without success, I decided that because the printer is connected to a WIFI router that the question can be part of this type of installation.  I finally got to the store today & bought a wireless network & plugged the printer & then in our router and VOILA it is printed.  The printer itself has its own internet security installed, so when the internet application that we tried to print, the printer it seen like a virus, by saying, and blocked the print job...

  Thank you... (for nothing)... Thought I'd post this for anyone else that may encounter this problem.

• Error message: "cannot find the wireless device" and not scan using 3 in 1 copy fax print HP 4500.

  Original title: Carpenter

  I can print but can't scan. Tried to uninstall then install the 3 in 1 copy fax printing hp 4500 but says cannot find the wireless device.

  Hi Ryan,

  You can check the link to HP support to run the HP Diagnostic Utility to check the issue of scanning:

  Find and fix common problems using tools of diagnosis HP printer=

  You can also check out the link to HP support and try to update the latest drivers/software for your printer:

  HP support

  You can also read the articles and check if it helps:

  Add or remove a scanner

  Scanning: Frequently asked questions

  The problems of scanning

• I get all the time can not download anything 'Windows cannot access the specified device, path or file. You can't have the permissions to access the have__appropriate element. »

  Original title: problems cannot do anything

  Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything

  Hi birdylod,

  ·         What version of the operating system is installed on the computer?

  ·         You did changes to the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         What files you download?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  For reference:

  What to know before applying permissions to a file or folder

• Since the last nights update I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Since update of last nights, I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Hi Jemd3,

  I suggest you to completely remove Norton of the system using Norton Removal Tool and check if the problem persists.

  Method 1:

  Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the links below.

  Microsoft OneCare:

  http://OneCare.live.com/standard/EN-US/3/default.htm

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Get a free PC safety scan

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Windows 7 - get this message when you try to open a file. Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  When I left click on the icon to open the file, I get the 17 ' error '. "  I right click on icon and select "run as Administrator'l and it will open, but lately it won't and the message above."

  Hi Bob,

  1. in open file are you get this error message?

  2. don't you make changes on the computer before this problem?

  This problem may occur if one of the following scenarios arises on your PC.

  • You do not have permissions for the file or the location of the file.
  • The file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer.
  • The file has been moved or deleted.
  • The shortcut or the file is corrupted.
  • The file may be blocked by Windows.
  • Your anti-virus software may block the file.

  Refer to the help article:

   

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

  http://support.Microsoft.com/kb/2669244

  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished. Use this workaround at your own risk.

  Response with more information to help you.

• Writing files apps get the "Windows cannot access the specified device, path or file. May not be the appropriate permissions for access you the items"error

  It only occurs with certain applications. Firefox and steam (the game application), for example.

  He regularly happening when trying to download a file with Firefox, regardless of the folder I tried to save the item to. Helped Disabling UAC. Sometimes, even when from time to time, however. I usually just download the file again in the same place, and it works fine.

  With steam, it happens 100% of the time when he tries to update. I am trying to troubleshoot with them, but I strongly suspect that there is an underlying problem related to Windows. I am running Windows 7 Home Premium 64-bit.

  It may be relevant that all my files have the blob (not checked) in the box 'read only '.

  There has been no recent changes to my computer.

  I tried:

  Creating a user profile. The question persists while the user as well.
  Using the attrib command from the command prompt to reset the properties of the folder.
  Run the checker system (no errors found) files.
  Taking possession of the records.
  Make sure that I have all the permissions with folders.
  Right click to run applications as an administrator.
  Check if the requests are blocked.
  Try start mode selective (Microsoft, no startup application services).
  Re-registration of Windows install.

  My antivirus software is Microsoft Security Essentials. I did full scans. It prompted me without warning.

  Hello

  Are you having the same problem during the download of Internet Explorer?
   
  Method 1:
  I suggest you try the procedure described in the article and see if it helps.
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244
  Note: There is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
   
  Method 2:
  If the problem is not resolved I suggest you to save the files and run an upgrade on the spot to repair permissions.
   
  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099
   

  Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Hope this helps and keep us posted.
   
   

• Cannot get the file to be imported.

  I tried the method of JoseIbarra - I did as suggested but cannot get the file to be imported in the services file. He never asked me if I wanted to add the information in the registry, so it is still on the office. Don't know what to do from here.

  Please stick to the initial conversation.

  Is this you speak of course (*first conversation*):
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-do-i-get-print-spooler-back-into-my-Windows-XP/ed014329-1bd3-458d-9C93-bbb306fc731f

  You also made this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler/c4610093-a96f-4476-B263-eecf5b8fc339

  (but please do not reply to this one...)

  And this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/continuation-of-print-spooler-problem/0e885d7b-3e64-42ee-A248-9d9f2a8e26c5

  (Even once - keep the * first conversation * going.)  Written on it.  Show how this conversation continues spreading around.)

  BTW - my suggestion has not changed.  I still think that you get just around issues that still exist, probably, by fixing the little things you need at a given time.

  Backup important files/folders (for you) (including documents, photos, music, Favorites, Internet favorites, files installable application, serial numbers, product keys, spreadsheets, you saved to the desktop email, etc.) and wipe the disc completely - I'd even a zero writing on the disc (formatting) before installing the operating system from the original installation media.  Then install your applications and restore your files.

  As to what they were asked to do... Always seems that you saved the file as a *. TXT file and not a *. REG or there is much more wrong with your machine (see my suggestion above.)

  Visit this web page to look at the photo on the left (a first) to see the screenshot of the possible is the desktop icons and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

  To check if you saved incorrectly or if there is something wrong with your system (or two) - right click on the file you saved and choose 'Properties' from the menu you get.  Under the 'Général' tab, she said, "file Type: registration entries (.reg)" and "opens with: Registry Editor" or something similar?  Visit this web page to look at the picture on the right (second) to see the screenshot of the possible look at the windows of the property and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

• Will set up the HP Photosmart 7510 new iMac OSX 10.7.3; Cannot get the home screen appears.

  Instead of the home screen, I get an error message ' no connection: your printer is not connected to a network. " If please connect to a network and try again. "I downloaded the software and latest drivers; my iMac recognizes the new HP printer.  But I must still be able to get the home screen to display on the printer so that I can do the basic settings.  I did the simple troubleshooting suggestions (for example, for printer disconnected from the socket wall and then plugged in;) I restarted the iMac; I uninstalled the software and drivers and reinstalled)... but no change, cannot get the home screen appears.

  The printer turned on, unplug the power to the back of the printer (not the wall) for 30 seconds.

  If this does not work, it seems that your printer is maybe defective.  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• "Windows cannot access the specified device, path or file" for each X 86 application on a Windows 2003 x 64 server

  Hello

  I have a Windows 2003 X 64 server and since a week ago everything works fine.

  For a week or two when I try to run an X 86 application, I always get this error:
  "Windows cannot access the specified device, path or file.
  If I run a x 64 apps everything works fine.
  What made a mistake?
  Thank you

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

  Hello

  Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

  No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

  Thanks for your response

• message error "windows cannot access the specified device path or file.

  After updating all upgrades of Windows and restarting my computer, I get the error message "windows cannot access the specified device path or file" on all my programs. I tried to go to the 'system restore', but it won't let me access that is. I am running Windows XP on a Dell Vostro 400

  Tried to start the restoration of the system from the Windows Advanced Options menu and he tried to restore from the last successful boot - unfortunately the last successful upward included the problem start

  Restarted in safe mode and not run Chkdsk/r - no found error - problem persists.

  Finally found my Dell operating system disk and went into the Boot Menu at startup screen and set it to Boot from the Dell operating system CD

  After the CD started, I went to reinstall Windows, and he gave me an option for repair

  The relocation process took about 30 minutes to complete, but he reinstalled all missing or damaged files that were the cause of the problem

  Fixed a problem!

  Thanks Mike - You're on the right track!